EPOS (Exoplanet Population Observation Simulator) simulates observations of exoplanet populations. It provides an interface between planet formation simulations and exoplanet surveys such as Kepler. EPOS can also be used to estimate planet occurrence rates and the orbital architectures of planetary systems.

epsnoise simulates pixel noise in weak-lensing ellipticity and shear measurements. This open-source python code can efficiently create an intrinsic ellipticity distribution, shear it, and add noise, thereby mimicking a "perfect" measurement that is not affected by shape-measurement biases. For theoretical studies, we provide the Marsaglia distribution, which describes the ratio of normal variables in the general case of non-zero mean and correlation. We also added a convenience method that evaluates the Marsaglia distribution for the ratio of moments of a Gaussian-shaped brightness distribution, which gives a very good approximation of the measured ellipticity distribution also for galaxies with different radial profiles. We provide four shear estimators, two based on the ε ellipticity measure, two on χ. While three of them are essentially plain averages, we introduce a new estimator which requires a functional minimization.

eqpair computes the electron energy distribution resulting from a balance between heating and direct acceleration of particles, and cooling processes. Electron-positron pair balance, bremstrahlung, and Compton cooling, including external soft photon input, are among the processes considered, and the final electron distribution can be hybrid, thermal, or non-thermal.

EqTide calculates the evolution of 2 bodies experiencing tidal evolution according to the "equilibrium tide" framework's "constant-phase-lag" and "constant-time-lag" models. The input file contains a list of options that can be set, as well as output parameters that print to a file during an integration. The example input files provide a guide for the syntax and grammar of EqTide.

The Fortran program EQUIB solves the statistical equilibrium equation for each ion and yields atomic level populations and line emissivities for given physical conditions, namely electron temperature and electron density, appropriate to the zones in an ionized nebula where the ions are expected to exist.

escatter.py performs Monte Carlo simulations of electron scattering events. The code was developed to better understand the emission lines from the interacting supernova SN 2021adxl, specifically the blue excess seen in the Hα 6563A emission line. escatter follows a photon that was formed in a thin interface between the supernova ejecta and surrounding material as it travels radially outwards through the dense material, scattering electrons outwards until it reaches an optically thin region, and plots a histogram of the emergent photons.

The ESO-MIDAS system provides general tools for image processing and data reduction with emphasis on astronomical applications including imaging and special reduction packages for ESO instrumentation at La Silla and the VLT at Paranal. In addition it contains applications packages for stellar and surface photometry, image sharpening and decomposition, statistics, data fitting, data presentation in graphical form, and more.

EsoRex (ESO Recipe Execution Tool) lists, configures, and executes Common Pipeline Library (CPL) (ascl:1402.010) recipes from the command line. Its features include automatically generating configuration files, recursive recipe-path searching, command line and configuration file parameters, and recipe product naming control, among many others.

ESP (Extended Surface Photometry) determines the photometric properties of galaxies and other extended objects. It has applications that detect flatfielding faults, remove cosmic rays, median filter images, determine image statistics and local background values, perform galaxy profiling, fit 2-D Gaussian profiles to galaxies, generate pie slice cross-sections of galaxies, and display profiling results. It is distributed as part of the Starlink software collection (ascl:1110.012).

ESSENCE (Evaluating Statistical Significance undEr Noise CorrElation) evaluates the statistical significance of image analysis and signal detection under correlated noise in interferometric images (e.g., ALMA, NOEMA). It measures the noise autocorrelation function (ACF) to fully characterize the statistical properties of spatially correlated noise in the interferometric image, computes the noise in the spatially integrated quantities (e.g., flux, spectrum) with a given aperture, and simulates noise maps with the same correlation property. ESSENSE can also construct a covariance matrix from noise ACF, which can be used for a 2d image or 3d cube model fitting.

The ESTER code computes the steady state of an isolated star of mass larger than two solar masses. The only convective region computed as such is the core where isentropy is assumed. ESTER provides solutions of the partial differential equations, for the pressure, density, temperature, angular velocity and meridional velocity for the whole volume. The angular velocity (differential rotation) and meridional circulation are computed consistently with the structure and are driven by the baroclinic torque. The code uses spectral methods, both radially and horizontally, with spherical harmonics and Chebyshev polynomials. The iterations follow Newton's algorithm. The code is object-oriented and is written in C++; a python suite allows an easy visualization of the results. While running, PGPLOT graphs are displayed to show evolution of the iterations.

EstrellaNueva calculates expected rates of supernova neutrinos in detectors. It provides a link between supernova simulations and the expected events in detectors by calculating fluences and event rates in order to ease any comparison between theory and observation. The software is a standalone tool for exploring many physics scenarios, and offers an option to add analytical cross sections and define any target material.

Written for the Wide-Field Infrared Survey Telescope (WFIRST) high-latitude survey, the exposure time calculator (ETC) works in both imaging and spectroscopic modes. In addition to the standard ETC functions (e.g. background and S/N determination), the calculator integrates over the galaxy population and forecasts the density and redshift distribution of galaxy shapes usable for weak lensing (in imaging mode) and the detected emission lines (in spectroscopic mode). The program may be useful outside of WFIRST but no warranties are made regarding its suitability for general purposes. The software is available for download; IPAC maintains a web interface for those who wish to run a small number of cases without having to download the package.

ETC++ is a exposure-time calculator that considers the effect of cosmic rays, undersampling, dithering, and imperfect pixel response functions. Errors on astrometry and galaxy shape measurements can be predicted as well as photometric errors.

EvapMass predicts the minimum masses of planets in multi-planet systems using the photoevaporation-driven evolution model. The planetary system requires both a planet above and below the radius gap to be useful for this test. EvapMass includes an example Jupyter notebook for the Kepler-36 system. EvalMass can be used to identify TESS systems that warrant radial-velocity follow-up to further test the photoevaporation model.

Eventdisplay reconstructs and analyzes data from the Imaging Atmospheric Cherenkov Telescopes (IACT). It has been primarily developed for VERITAS and CTA analysis. The package calibrates and parametrizes images, event reconstruction, and stereo analysis, and provides train boosted decision trees for direction and energy reconstruction. It fills and uses lookup tables for mean scaled width and length calculation, energy reconstruction, and stereo reconstruction, and calculates radial camera acceptance from data files and instrument response functions such as effective areas, angular point-spread function, and energy resolution. Eventdisplay offers additional tools as well, including tools for calculating sky maps and spectral energy distribution, and to plot instrument response function, spectral energy distributions, light curves, and sky maps, among others.

EVEREST (EPIC Variability Extraction and Removal for Exoplanet Science Targets) removes instrumental noise from light curves with pixel level decorrelation and Gaussian processes. The code, written in Python, generates the EVEREST catalog and offers tools for accessing and interacting with the de-trended light curves. EVEREST exploits correlations across the pixels on the CCD to remove systematics introduced by the spacecraft’s pointing error. For K2, it yields light curves with precision comparable to that of the original Kepler mission. Interaction with the EVEREST catalog catalog is available via the command line and through the Python interface. Though written for K2, EVEREST can be applied to additional surveys, such as the TESS mission, to correct for instrumental systematics and enable the detection of low signal-to-noise transiting exoplanets.

EVo calculates the speciation and volume of a volcanic gas phase erupting in equilibrium with its parent magma. Models can be run to calculate the gas phase in equilibrium with a melt at a single pressure, or the melt can be decompressed from depth rising to the surface as a closed-system case. Single pressure and decompression can be run for OH, COH, SOH, COHS and COHSN systems. EVo can calculate gas phase weight and volume fraction within the system, gas phase speciation as mole fraction or weight fraction across numerous compounds, and the volatile content of the melt at each pressure. It also calculates melt density, f02 of the system, and more. EVo can be set up using either melt volatile contents, or for a set amount of atomic volatile which is preferable for conducting experiments over a wide range of fO2 values.

EvoEMD evaluates cosmic evolution with or without an early matter dominated (EMD) era. The framework includes global parameter, particle, and process systems, and different methods for Hubble parameter calculation. EvoEMD automatically builds up the Boltzmann equation according to the user's definition of particle and process,solves the Boltzmann equation using 4th order Runge-Kutta method with adaptive steps tailored to cosmology application, and caches the collision rate calculation results for fast evaluation.

evolstate assigns crude evolutionary states (main-sequence, subgiant, red giant) to stars given an input temperature and radius/surface gravity, based on physically motivated boundaries from solar metallicity interior models.

EVolve calculates the chemical composition and surface pressure of a ID atmosphere on a rocky planet that is being produced by volcanic activity, as it grows over time. Once the initial volatile content of the planet's mantle and the composition and resultant surface pressure of any pre-existing atmosphere is set, the volcanic degassing model EVo (ascl:2307.052) calculates the amount and speciation of any volcanic gases released into the atmosphere over each time step. Atmospheric processing is calculated using FastChem (ascl:1804.025); thermochemical equilibrium is assumed so the final chemical composition of the atmosphere is calculated according to the pre-set surface temperature.

EXCEED-DM (EXtended Calculation of Electronic Excitations for Direct detection of Dark Matter) provides a complete framework for computing DM-electron interaction rates. Given an electronic configuration, EXCEED-DM computes the relevant electronic matrix elements, then particle physics specific rates from these matrix elements. This allows for separation between approximations regarding the electronic state configuration, and the specific calculation being performed.

The EXtraction of COsmological Parameters software (EXCOP) is a set of C and IDL programs together with a very large database of cosmological models generated by CMBFAST (ascl:9909.004) that will compute likelihood functions for cosmological parameters given some CMB data. This is the software and database used in the Stompor et al. (2001) analysis of a high resoultion Maxima1 CMB anisotropy map.

The Exoplanet Detection Map Calculator (Exo-DMC) performs statistical analysis of exoplanet surveys results using Monte Carlo methods. Written in Python, it is the latest rendition of the MESS (Multi-purpose Exoplanet Simulation System, ascl:1111.009). Exo-DMC combines the information on the target stars with instrument detection limits to estimate the probability of detection of companions within a user defined range of masses and physical separations, ultimately generating detection probability maps. The software allows for a high level of flexibility in terms of possible assumptions on the synthetic planet population to be used for the determination of the detection probability.

The heterogeneity of papers dealing with the discovery and characterization of exoplanets makes every attempt to maintain a uniform exoplanet catalog almost impossible. Four sources currently available online (NASA Exoplanet Archive, Exoplanet Orbit Database, Exoplanet Encyclopaedia, and Open Exoplanet Catalogue) are commonly used by the community, but they can hardly be compared, due to discrepancies in notations and selection criteria.
Exo-MerCat is a Python code that collects and selects the most precise measurement for all interesting planetary and orbital parameters contained in the four databases, accounting for the presence of multiple aliases for the same target. It can download information about the host star as well by the use of Virtual Observatory ConeSearch connections to the major archives such as SIMBAD and those available in VizieR. A Graphical User Interface is provided to filter data based on the user's constraints and generate automatic plots that are commonly used in the exoplanetary community.
With Exo-MerCat, we retrieved a unique catalog that merges information from the four main databases, standardizing the output and handling notation differences issues. Exo-MerCat can correct as many issues that prevent a direct correspondence between multiple items in the four databases as possible, with the available data. The catalog is available as a VO resource for everyone to use and it is periodically updated, according to the update rates of the source catalogs.

EXO-NAILER (EXOplanet traNsits and rAdIal veLocity fittER) efficiently fits exoplanet transit lightcurves, radial velocities (RVs) or both. The code handles data taken with different instruments. For RVs, a different center-of-mass velocity can be fitted for each instrument to account for offsets between them; if jitter is included, a different jitter term can also fitted for each instrument. For transits, a different photometric jitter can be fitted to each instrument as can different limb-darkening coefficients and different transit depths. In addition to general options that need to be set, EXO-NAILER also requires that photometry and radial velocity options be defined for each instrument.

Exo-Transmit calculates the transmission spectrum of an exoplanet atmosphere given specified input information about the planetary and stellar radii, the planet's surface gravity, the atmospheric temperature-pressure (T-P) profile, the location (in terms of pressure) of any cloud layers, the composition of the atmosphere, and opacity data for the atoms and molecules that make up the atmosphere. The code solves the equation of radiative transfer for absorption of starlight passing through the planet's atmosphere as it transits, accounting for the oblique path of light through the planetary atmosphere along an Earth-bound observer's line of sight. The fraction of light absorbed (or blocked) by the planet plus its atmosphere is calculated as a function of wavelength to produce the wavelength-dependent transmission spectrum. Functionality is provided to simulate the presence of atmospheric aerosols in two ways: an optically thick (gray) cloud deck can be generated at a user-specified height in the atmosphere, and the nominal Rayleigh scattering can be increased by a specified factor.

ExoCAM adapts the NCAR Community Earth System Model (CESM) for planetary and exoplanetary applications. The system files, source code, initial conditions files, and namelists provided do not run standalone. ExoCAM is a patch to be used with standard distributions of CESM version 1.2.1 (http://www.cesm.ucar.edu/models/current.html), and is also intended to be run with ExoRT (ascl:2002.019), a correlated-k radiative transfer package.

exocartographer solves the exo-cartography inverse problem. This flexible forward-modeling framework, written in Python, retrieves the albedo map and spin geometry of a planet based on time-resolved photometry; it uses a Markov chain Monte Carlo method to extract albedo maps and planet spin and their uncertainties. Gaussian Processes use the data to fit for the characteristic length scale of the map and enforce smooth maps.

ExoCross generates spectra and thermodynamic properties from molecular line lists in ExoMol, HITRAN, or several other formats. The code is parallelized and also shows a high degree of vectorization; it works with line profiles such as Doppler, Lorentzian and Voigt and supports several broadening schemes. ExoCross is also capable of working with the recently proposed method of super-lines. It supports calculations of lifetimes, cooling functions, specific heats and other properties. ExoCross converts between different formats, such as HITRAN, ExoMol and Phoenix, and simulates non-LTE spectra using a simple two-temperature approach. Different electronic, vibronic or vibrational bands can be simulated separately using an efficient filtering scheme based on the quantum numbers.

The Exoplanet Characterization ToolKit (ExoCTK) focuses primarily on the atmospheric characterization of exoplanets and provides tools for time-series observation planning, forward modeling, data reduction, limb darkening, light curve fitting, and retrievals. It contains calculators for contamination, visibility, integrations and groups, and includes several Jupyter Notebooks to aid in learning how to use the various tools included in the ExoCTK package.

ExoData is a python interface for accessing and exploring the Open Exoplanet Catalogue. It allows searching of planets (including alternate names) and easy navigation of hierarchy, parses spectral types and fills in missing parameters based on programmable specifications, and provides easy reference of planet parameters such as GJ1214b.ra, GJ1214b.T, and GJ1214b.R. It calculates values such as transit duration, can easily rescale units, and can be used as an input catalog for large scale simulation and analysis of planets.

Exodetbox provides mathematical methods for calculating the planet-star separation and difference in magnitude extrema as well as when planets have particular planet-star separations or differences in magnitude. The code also projects the 3D Keplerian Orbit into a reparameterized 2D ellipse in the plane of the sky. Exodetbox is implemented in the EXOSIMS modeling software (ascl:1706.010).

EXOFAST is a fast, robust suite of routines written in IDL which is designed to fit exoplanetary transits and radial velocity variations simultaneously or separately, and characterize the parameter uncertainties and covariances with a Differential Evolution Markov Chain Monte Carlo method. Our code self-consistently incorporates both data sets to simultaneously derive stellar parameters along with the transit and RV parameters, resulting in consistent, but tighter constraints on an example fit of the discovery data of HAT-P-3b that is well-mixed in under two minutes on a standard desktop computer. EXOFAST has an easy-to-use online interface for several basic features of our transit and radial velocity fitting. A more robust version of EXOFAST, EXOFASTv2 (ascl:1710.003), is also available.

EXOFASTv2 improves upon EXOFAST (ascl:1207.001) for exoplanet modeling. It uses a differential evolution Markov Chain Monte Carlo code to fit an arbitrary number of transits (each with their own error scaling, normalization, TTV, and/or detrending parameters), an arbitrary number of RV sources (each with their own zero point and jitter), and an arbitrary number of planets, changing nothing but command line arguments and configuration files. The global model includes integrated isochrone and SED models to constrain the stellar properties and can accept priors on any fitted or derived quantities (e.g., parallax from Gaia). It is easily extensible to add additional effects or parameters.

ExoFit is a freely available software package for estimating orbital parameters of extra-solar planets. ExoFit can search for either one or two planets and employs a Bayesian Markov Chain Monte Carlo (MCMC) method to fit a Keplerian radial velocity curve onto the radial velocity data.

ExoGAN (Exoplanets Generative Adversarial Network) analyzes exoplanetary atmospheres using an unsupervised deep-learning algorithm that recognizes molecular features, atmospheric trace-gas abundances, and planetary parameters. After training, ExoGAN can be applied to a large number of instruments and planetary types and can be used either as a final atmospheric analysis or to provide prior constraints to subsequent retrieval.

exoinformatics computes the entropy of a planetary system's size ordering using three different entropy methods: tally-scores, integral path, and change points.

ExoJAX provides auto-differentiable line-by-line spectral modeling of exoplanets/brown dwarfs/M dwarfs using JAX (ascl:2111.002). In a nutshell, ExoJAX allows the user to do a HMC-NUTS fitting using the latest molecular/atomic data in ExoMol, HITRAN/HITEMP, and VALD3. The code enables a fully Bayesian inference of the high-dispersion data to fit the line-by-line spectral computation to the observed spectrum, from end-to-end (i.e. from molecular/atomic databases to real spectra), by combining it with the Hamiltonian Monte Carlo in recent probabilistic programming languages such as NumPyro.

ExoPix is a collection of tutorials aimed at illustrating the imaging of exoplanets with the James Webb Space Telescope (JWST). ExoPix tutorials are meant to demonstrate the application of the PSF-subtraction algorithm pyKLIP (ascl:1506.001) to simulated JWST NIRCAM data. We provide simple walkthroughs of pyKLIP’s ability to reveal exoplanets, compute contrast curves, and measure exoplanet astrometry and photometry in imaged extrasolar systems.

ExoPlanet provides a graphical interface for the construction, evaluation and application of a machine learning model in predictive analysis. With the back-end built using the numpy and scikit-learn libraries, ExoPlanet couples fast and well tested algorithms, a UI designed over the PyQt framework, and graphs rendered using Matplotlib. This serves to provide the user with a rich interface, rapid analytics and interactive visuals.

ExoPlanet is designed to have a minimal learning curve to allow researchers to focus more on the applicative aspect of machine learning algorithms rather than their implementation details and supports both methods of learning, providing algorithms for unsupervised and supervised training, which may be done with continuous or discrete labels. The parameters of each algorithms can be adjusted to ensure the best fit for the data. Training data is read from a CSV file, and after training is complete, ExoPlanet automates the building of the visual representations for the trained model. Once training and evaluation yield satisfactory results, the model may be used to make data based predictions on a new data set.

exoplanet is a toolkit for probabilistic modeling of transit and/or radial velocity observations of exoplanets and other astronomical time series using PyMC3 (ascl:1610.016), a flexible and high-performance model building language and inference engine. exoplanet extends PyMC3's language to support many of the custom functions and distributions required when fitting exoplanet datasets. These features include a fast and robust solver for Kepler's equation; scalable Gaussian processes using celerite (ascl:1709.008); and fast and accurate limb darkened light curves using the code starry (ascl:1810.005). It also offers common reparameterizations for limb darkening parameters, and planet radius and impact parameters.

Exoplanet determines the posterior distribution of exoplanets by use of a trans-dimensional Markov Chain Monte Carlo method within Nested Sampling. This method finds the posterior distribution in a single run rather than requiring multiple runs with trial values.

ExoPlaSim extends the PlaSim (ascl:2107.019) 3D general climate model to terrestrial exoplanets. It includes the PlaSim general circulation model and modifications that allow this code to run tidally-locked planets, planets with substantially different surface pressures than Earth, planets orbiting stars with different effective temperatures, super-Earths, and more. ExoPlaSim includes the ability to compute carbon-silicate weathering, dynamic orography through the glacier module (though only accumulation and ablation/evaporation/melting are included; glacial flow and spreading are not), and storm climatology.

Exopop is a general hierarchical probabilistic framework for making justified inferences about the population of exoplanets. Written in python, it requires that the occurrence rate density be a smooth function of period and radius (employing a Gaussian process) and takes survey completeness and observational uncertainties into account. Exopop produces more accurate estimates of the whole population than standard procedures based on weighting by inverse detection efficiency.

ExoPriors calculates a log-likelihood penalty for an input set of transit parameters to account for observational bias (geometric and signal-to-noise ratio detection bias) of transiting exoplanets. Written in Python, the code calculates this log-likelihood penalty in one of seven user-specified cases specified with Boolean input parameters for geometric and/or SNR bias, grazing or non-grazing events, and occultation events.

ExoRad 2.0, a generic point source radiometric model, interfaces with any instrument to provide an estimate of several Payload performance metrics. For each target and for each photometric and spectroscopic channel, the code provides estimates of signals in pixels, saturation times, and read, photon, and dark current noise. ExoRad also provides estimates for the zodiacal background, inner sanctum, and sky foreground.

Exorings, written in Python, contains tools for displaying and fitting giant extrasolar planet ring systems; it uses FITS formatted data for input.

Exorings is suitable for surveying entire catalogs of transiting planet candidates for exoring candidates, providing a subset of objects worthy of more detailed light curve analysis. Moreover, it is highly suited for uncovering evidence of a population of ringed planets by comparing the radius anomaly and PR-effects in ensemble studies.

ExoRT is a flexible, two-stream radiative transfer code that interfaces with CAM/CESM (http://www.cesm.ucar.edu/models/current.html) or 1D offline; it is also used with ExoCAM (ascl:2002.020). Quadrature is used for shortwave and hemispheric mean is used for longwave. The gas phase optical depths are calculate using a correlated K-distribution method, with overlapping bands treated using an amount weighted scheme. Cloud optics are treated using mie scattering for both liquid and ice clouds, and cloud overlap is treated using Monte Carlo Independent Column Approximation.

ExoSim models host star and planet transit events, simulating the temporal change in stellar flux due to the light curve. It is wavelength-dependent, using an input planet spectrum to determine the light curve depth for any given wavelength and can capture temporal effects, such as correlated noise. ExoSim's star spot simulator produces simulated observations that include spot and facula contamination. The code is flexible and can be generically applied to different instruments that simulate specific time-dependent processes.

EXOSIMS generates and analyzes end-to-end simulations of space-based exoplanet imaging missions. The software is built up of interconnecting modules describing different aspects of the mission, including the observatory, optical system, and scheduler (encoding mission rules) as well as the physical universe, including the assumed distribution of exoplanets and their physical and orbital properties. Each module has a prototype implementation that is inherited by specific implementations for different missions concepts, allowing for the simulation of widely variable missions.

ExoSOFT provides orbital analysis of exoplanets and binary star systems. It fits any combination of astrometric and radial velocity data, and offers four parameter space exploration techniques, including MCMC. It is packaged with an automated set of post-processing and plotting routines to summarize results, and is suitable for performing orbital analysis during surveys with new radial velocity and direct imaging instruments.

ExoTETHyS models exoplanetary transits, eclipsing binaries, and related phenomena. The package calculates stellar limb-darkening coefficients down to <10 parts per million (ppm) and generates an exact transit light-curve based on the entire stellar intensity profile rather than limb-darkening coefficients.

EXOTIC (EXOplanet Transit Interpretation Code) analyzes photometric data of transiting exoplanets into lightcurves and retrieves transit epochs and planetary radii. The software reduces images of a transiting exoplanet into a lightcurve, and fits a model to the data to extract planetary information crucial to increasing the efficiency of larger observational platforms. EXOTIC is written in Python and supports the citizen science project Exoplanet Watch. The software runs on Windows, Macintosh, and Linux/Unix computer, and can also be used via Google Colab.

The simple, straightforward Exotrending code detrends exoplanet transit light curves given a light curve (flux versus time) and good ephemeris (epoch of first transit and orbital period). The code has been tested with Kepler and K2 light curves and should work with any other light curve.

exoVista generates a "universe" of planetary systems, creating thousands of models of quasi-self-consistent planetary systems around known nearby stars at scattered light wavelengths. It efficiently records the position, velocity, spectrum, and physical parameters of all bodies as functions of time. exoVista models can be used for simulating surveys using the direct imaging, transit, astrometric, and radial velocity techniques.

ExPRES (Exoplanetary and Planetary Radio Emission Simulator) reproduces the occurrence of CMI-generated radio emissions from planetary magnetospheres, exoplanets or star-planet interacting systems in time-frequency plane, with special attention given to computation of the radio emission beaming at and near its source. Physical information drawn from such radio observations may include the location and dynamics of the radio sources, the type of current system leading to electron acceleration and their energy and, for exoplanetary systems, the magnetic field strength, the orbital period of the emitting body and the rotation period, tilt and offset of the planetary magnetic field. Most of these parameters can be remotely measured only via radio observations. ExPRES code provides the proper framework of analysis and interpretation for past (Cassini, Voyager, Galileo), current (Juno, ground-based radio telescopes) and future (BepiColombo, Juice) observations of planetary radio emissions, as well as for future detection of radio emissions from exoplanetary systems.

EXSdetect is a python implementation of an X-ray source detection algorithm which is optimally designed to detected faint extended sources and makes use of Voronoi tessellation and Friend-of-Friend technique. It is a flexible tool capable of detecting extended sources down to the lowest flux levels attainable within instrumental limitations while maintaining robust photometry, high completeness, and low contamination, regardless of source morphology. EXSdetect was developed mainly to exploit the ever-increasing wealth of archival X-ray data, but is also ideally suited to explore the scientific capabilities of future X-ray facilities, with a strong focus on investigations of distant groups and clusters of galaxies.

The program EXTINCT.FOR is a FORTRAN subroutine summarizing a three-dimensional visual Galactic extinction model, based on a number of published studies. INPUTS: Galactic latitude (degrees), Galactic longitude (degrees), and source distance (kpc). OUTPUTS (magnitudes): Extinction, extinction error, a statistical correction term, and an array containing extinction and extinction error from each subroutine. The model is useful for correcting visual magnitudes of Galactic sources (particularly in statistical models), and has been used to find Galactic extinction of extragalactic sources. The model's limited angular resolution (subroutine-dependent, but with a minimum resolution of roughly 2 degrees) is necessitated by its ability to describe three-dimensional structure.

Extinction-distances uses the number of foreground stars and a Galactic model of the stellar distribution to estimate the distance to dark clouds. It exploits the relatively narrow range of intrinsic near-infrared colors of stars to separate foreground from background stars. An advantage of this method is that the distribution of stellar colors in the Galactic model need not be precisely correct, only the number density as a function of distance from the Sun.

extinction is an implementation of fast interstellar dust extinction laws in Python. It contains Cython-optimized implementations of empirical dust extinction laws found in the literature. Flux values can be reddened or dereddened using included functions, and all extinction laws accept a unit keyword to change the interpretation of the wavelength array from Angstroms to inverse microns. Part of this code originated in the specutils package (ascl:1902.012).

ExtLaw_H18 generates the extinction law between 0.8 - 2.2 microns. The law is derived using the Westerlund 1 (Wd1) main sequence (A_Ks ~ 0.6 mag) and Arches cluster field Red Clump at the Galactic Center (A_Ks ~ 2.7 mag). To derive the law a Wd1 cluster age of 5 Myr is assumed, though changing the cluster age between 4 Myr -- 7 Myr has no effect on the law. This extinction law can be applied to highly reddened stellar populations that have similar foreground material as Wd1 and the Arches RC, namely dust from the spiral arms of the Milky Way in the Galactic Plane.

extrapops simulates extra-galactic populations of gravitational waves sources and models their emission during the inspiral phase. The code approximately assesses the detectability of individual sources by LISA and computes the background due to unresolved sources in the LISA band using different methods. The simulated populations can be saved in a format compatible with LISA LDC. Simulations are well calibrated to produce accurate background calculations and fair random generation at the tails of the distributions, which is important for accurate probability of detectable events. extrapops uses a number of ad-hoc techniques for rapid simulation and allows room for further optimization up to almost 1 order of magnitude.

Extreme-deconvolution is a general algorithm to infer a d-dimensional distribution function from a set of heterogeneous, noisy observations or samples. It is fast, flexible, and treats the data's individual uncertainties properly, to get the best description possible for the underlying distribution. It performs well over the full range of density estimation, from small data sets with only tens of samples per dimension, to large data sets with hundreds of thousands of data points.

In EyE (Enhance Your Extraction) an artificial neural network connected to pixels of a moving window (retina) is trained to associate these input stimuli to the corresponding response in one or several output image(s). The resulting filter can be loaded in SExtractor (ascl:1010.064) to operate complex, wildly non-linear filters on astronomical images. Typical applications of EyE include adaptive filtering, feature detection and cosmetic corrections.

EZ_Ages is an IDL code package that computes the mean, light-weighted stellar population age, [Fe/H], and abundance enhancements [Mg/Fe], [C/Fe], [N/Fe], and [Ca/Fe] for unresolved stellar populations. This is accomplished by comparing Lick index line strengths between the data and the stellar population models of Schiavon (2007), using a method described in Graves & Schiavon (2008). The algorithm uses the inversion of index-index model grids to determine ages and abundances, and exploits the sensitivities of the various Lick indices to measure Mg, C, N, and Ca enhancements over their solar abundances with respect to Fe.

EZ (Easy-Z) estimates redshifts for extragalactic objects. It compares the observed spectrum with a set of (user given) spectral templates to find out the best value for the redshift. To accomplish this task, it uses a highly configurable set of algorithms. EZ is easily extendible with new algorithms. It is implemented as a set of C programs and a number of python classes. It can be used as a standalone program, or the python classes can be directly imported by other applications.

EzGal is a flexible Python program which generates observable parameters (magnitudes, colors, and mass-to-light ratios) for arbitrary input stellar population synthesis (SPS) models; it enables simple, direct comparison of different model sets so that the uncertainty introduced by choice of model set can be quantified. EzGal is also capable of generating composite stellar population models (CSPs) for arbitrary input star-formation histories and reddening laws, and can be used to interpolate between metallicities for a given model set.

EzTao models time series as a continuous-time autoregressive moving-average (CARMA) process. EzTao utilizes celerite (ascl:1709.008), a fast and scalable Gaussian Process Regression library, to evaluate the likelihood function. On average, EzTao is ten times faster than other tools relying on a Kalman filter for likelihood computation.

Light curves from the Kepler telescope rely on "postage stamp" cutouts of a few pixels near each of 200,000 target stars. These light curves are optimized for the detection of short-term signals like planet transits but induce systematics that overwhelm long-term variations in stellar flux. Longer-term effects can be recovered through analysis of the Full Frame Images, a set of calibration data obtained monthly during the Kepler mission. The Python package f3 analyzes the Full Frame Images to infer long-term astrophysical variations in the brightness of Kepler targets, such as magnetic activity or sunspots on slowly rotating stars.

FABADA (Fully Adaptive Bayesian Algorithm for Data Analysis) performs non-parametric noise reduction using Bayesian inference. It iteratively evaluates possible smoothed models of the data to estimate the underlying signal that is statistically compatible with the noisy measurements. Iterations stop based on the evidence E and the χ² statistic of the last smooth model, and the expected value of the signal is computed as a weighted average of the smooth models. Though FABADA was written for astronomical data, such as spectra (1D) or images (2D), it can be used as a general noise reduction algorithm for any one- or two-dimensional data; the only requisite of the input data is an estimation of its associated variance.

FAC calculates various atomic radiative and collisional processes, including radiative transition rates, collisional excitation and ionization by electron impact, energy levels, photoionization, and autoionization, and their inverse processes radiative recombination and dielectronic capture. The package also includes a collisional radiative model to construct synthetic spectra for plasmas under different physical conditions.

FacetClumps extracts and analyses clumpy structure in molecular clouds. Written in Python and based on the Gaussian Facet model, FacetClumps extracts signal regions using morphology, and segments the signal regions into local regions with a gradient-based method. It then applies a connectivity-based minimum distance clustering method to cluster the local regions to the clump centers. FacetClumps automatically adjusts its parameters to local situations to improve adaptability, and is optimized to detect faint and overlapping clumps.

The Faiss library performs efficient similarity search and clustering of dense vectors. It contains algorithms that search in sets of vectors of any size, up to ones that possibly do not fit in RAM. It also contains supporting code for evaluation and parameter tuning. Faiss is written in C++ with complete wrappers for Python/numpy. Some of the most useful algorithms are implemented on the GPU.

The CASA (1107.013) task FAKEOBS generates model visibilities from already-existing measurement sets. This task can be used to substitute all the visibilities of the target with simulations computed from any model image. The measurement can either be with real or simulated data, the target can have been observed in mosaic mode, and there can be several sources (e.g., bandpass calibrator, flux/phase calibrator, and target).

FALCO (Fast Linearized Coronagraph Optimizer) performs coronagraphic focal plane wavefront correction. It includes routines for pair-wise probing estimation of the complex electric field and Electric Field Conjugation (EFC) control. FALCO utilizes and builds upon PROPER (ascl:1405.006) and rapidly computes the linearized response matrix for each DM, which facilitates re-linearization after each control step for faster DM-integrated coronagraph design and wavefront correction experiments. A Python 3 implementation of FALCO (ascl:2304.005) is also available.

FALCO (Fast Linearized Coronagraph Optimizer) performs coronagraphic focal plane wavefront correction. It includes routines for pair-wise probing estimation of the complex electric field and Electric Field Conjugation (EFC) control. FALCO utilizes and builds upon PROPER (ascl:1405.006) and rapidly computes the linearized response matrix for each DM, which facilitates re-linearization after each control step for faster DM-integrated coronagraph design and wavefront correction experiments. A MATLAB implementation of FALCO (ascl:2304.004) is also available.

FAlCon-DNS (Framework of time schemes for direct numerical simulation of annular convection) solves for 2-D convection in an annulus and analyzes different time integration schemes. The framework contains a suite of IMEX, IMEXRK and RK time integration schemes. The code uses a pseudospectral method for spatial discretization. The governing equations contain both numerically stiff (diffusive) and non-stiff (advective) components for time discretization. The software offers OpenMP for parallelization.

FalconIC generates discrete particle positions, velocities, masses and pressures based on linear Boltzmann solutions that are computed by libraries such as CLASS and CAMB. FalconIC generates these initial conditions for any species included in the selection, including Baryons, Cold Dark Matter and Dark Energy fluids. Any species can be set in Eulerian (on a fixed grid) or Lagrangian (particle motion) representation, depending on the gauge and reality chosen. That is, for relativistic initial conditions in the synchronous comoving gauge, Dark Matter can only be described in an Eulerian representation. For all other choices (Relativistic in Longitudinal gauge, Newtonian with relativistic expansion rates, Newtonian without any notion of radiation), all species can be treated in all representations. The code also computes spectra. FalconIC is useful for comparative studies on initial conditions.

FAMA (Fast Automatic MOOG Analysis), written in Perl, computes the atmospheric parameters and abundances of a large number of stars using measurements of equivalent widths (EWs) automatically and independently of any subjective approach. Based on the widely-used MOOG code, it simultaneously searches for three equilibria, excitation equilibrium, ionization balance, and the relationship between logn(FeI) and the reduced EWs. FAMA also evaluates the statistical errors on individual element abundances and errors due to the uncertainties in the stellar parameters. Convergence criteria are not fixed "a priori" but instead are based on the quality of the spectra.

The FAMED (Fast and AutoMated pEak bagging with Diamonds) pipeline is a multi-platform parallelized software that performs and automates extraction and mode identification of oscillation frequencies for solar-like pulsators. The pipeline can be applied to a large variety of stars, ranging from hot F-type main sequence, up to stars evolving along the red giant branch, settled into the core-Helium-burning main sequence, and even evolved beyond towards the early asymptotic giant branch. FAMED is based on DIAMONDS (ascl:1410.001), a Bayesian parameter estimation and model comparison by means of the nested sampling Monte Carlo (NSMC) algorithm.

FAMIAS (Frequency Analysis and Mode Identification for Asteroseismology) is a package of software tools programmed in C++ for the analysis of photometric and spectroscopic time-series data. FAMIAS provides analysis tools that are required for the steps between the data reduction and the seismic modeling. Two main sets of tools are incorporated in FAMIAS. The first set permits to search for periodicities in the data using Fourier and non-linear least-squares fitting techniques. The other set permits to carry out a mode identification for the detected pulsation frequencies to determine their harmonic degree l, and azimuthal order m. FAMIAS is applicable to main-sequence pulsators hotter than the Sun. This includes Gamma Dor, Delta Sct stars, slowly pulsating B (SPB)-stars and Beta Cep stars - basically all stars for which empirical mode identification is required to successfully carry out asteroseismology.

FARGO is an efficient and simple modification of the standard transport algorithm used in explicit eulerian fixed polar grid codes, aimed at getting rid of the average azimuthal velocity when applying the Courant condition. This results in a much larger timestep than the usual procedure, and it is particularly well-suited to the description of a Keplerian disk where one is traditionally limited by the very demanding Courant condition on the fast orbital motion at the inner boundary. In this modified algorithm, the timestep is limited by the perturbed velocity and by the shear arising from the differential rotation. The speed-up resulting from the use of the FARGO algorithm is problem dependent. In the example presented in the code paper below, which shows the evolution of a Jupiter sized protoplanet embedded in a minimum mass protoplanetary nebula, the FARGO algorithm is about an order of magnitude faster than a traditional transport scheme, with a much smaller numerical diffusivity.

A successor of FARGO (ascl:1102.017), FARGO3D is a versatile HD/MHD code that runs on clusters of CPUs or GPUs, with special emphasis on protoplanetary disks. FARGO3D offers Cartesian, cylindrical or spherical geometry; 1-, 2- or 3-dimensional calculations; and orbital advection (aka FARGO) for HD and MHD calculations. As in FARGO, a simple Runge-Kutta N-body solver may be used to describe the orbital evolution of embedded point-like objects. There is no need to know CUDA; users can develop new functions in C and have them translated to CUDA automatically to run on GPUs.

FASMA delivers the atmospheric stellar parameters (effective temperature, surface gravity, metallicity, microturbulence, macroturbulence, and rotational velocity) based on the spectral synthesis technique. This technique relies on the comparison of synthetic spectra with observations to yield the best-fit parameters under a χ2 minimization process. FASMA also delivers chemical abundances of 13 elements. Written in Python, the code is wrapped around MOOG (ascl:1202.009) which calculates the synthetic spectra. FASMA includes two grids of models in MOOG readable format, Kurucz and marcs, that cover the parameter space for both dwarf and giant stars with metallicity limit of -5.0 dex.

We place functional constraints on the shape of the inflaton potential from the cosmic microwave background through a variant of the generalized slow roll approximation that allows large amplitude, rapidly changing deviations from scale-free conditions. Employing a principal component decomposition of the source function G'~3(V'/V)^2 - 2V''/V and keeping only those measured to better than 10% results in 5 nearly independent Gaussian constraints that maybe used to test any single-field inflationary model where such deviations are expected. The first component implies < 3% variations at the 100 Mpc scale. One component shows a 95% CL preference for deviations around the 300 Mpc scale at the ~10% level but the global significance is reduced considering the 5 components examined. This deviation also requires a change in the cold dark matter density which in a flat LCDM model is disfavored by current supernova and Hubble constant data and can be tested with future polarization or high multipole temperature data. Its impact resembles a local running of the tilt from multipoles 30-800 but is only marginally consistent with a constant running beyond this range. For this analysis, we have implemented a ~40x faster WMAP7 likelihood method which we have made publicly available.

FAST-PT calculates 1-loop corrections to the matter power spectrum in cosmology. The code utilizes Fourier methods combined with analytic expressions to reduce the computation time down to scale as N log N, where N is the number of grid point in the input linear power spectrum. FAST-PT is extremely fast, enabling mode-coupling integral computations fast enough to embed in Monte Carlo Markov Chain parameter estimation.

FAST (Fitting and Assessment of Synthetic Templates) fits stellar population synthesis templates to broadband photometry and/or spectra. FAST is compatible with the photometric redshift code EAzY (ascl:1010.052) when fitting broadband photometry; it uses the photometric redshifts derived by EAzY, and the input files (for examply, photometric catalog and master filter file) are the same. FAST fits spectra in combination with broadband photometric data points or simultaneously fits two components, allowing for an AGN contribution in addition to the host galaxy light. Depending on the input parameters, FAST outputs the best-fit redshift, age, dust content, star formation timescale, metallicity, stellar mass, star formation rate (SFR), and their confidence intervals. Though some of FAST's functions overlap with those of HYPERZ (ascl:1108.010), it differs by fitting fluxes instead of magnitudes, allows the user to completely define the grid of input stellar population parameters and easily input photometric redshifts and their confidence intervals, and calculates calibrated confidence intervals for all parameters. Note that FAST is not a photometric redshift code, though it can be used as one.

Fastcc returns color corrections for different spectra for various Cosmic Microwave Background experiments. Available in both Python and IDL, the script is easy to use when analyzing radio spectra of sources with data from multiple wide-survey CMB experiments in a consistent way across multiple experiments.

FastChem is an equilibrium chemistry code that calculates the chemical composition of the gas phase for given temperatures and pressures. Written in C++, it is based on a semi-analytic approach and is optimized for extremely fast and accurate calculations.

The Fast Chi-Squared Algorithm is a fast, powerful technique for detecting periodicity. It was developed for analyzing variable stars, but is applicable to many of the other applications where the Fast Fourier Transforms (FFTs) or other periodograms (such as Lomb-Scargle) are currently used. The Fast Chi-squared technique takes a data set (e.g. the brightness of a star measured at many different times during a series of observations) and finds the periodic function that has the best frequency and shape (to an arbitrary number of harmonics) to fit the data. Among its advantages are:

• Statistical efficiency: all of the data are used, weighted by their individual error bars, giving a result with a significance calibrated in well-understood Chi-squared statistics.
• Sensitivity to harmonic content: many conventional techniques look only at the significance (or the amplitude) of the fundamental sinusoid and discard the power of the higher harmonics.
• Insensitivity to the sample timing: you won't find a period of 24 hours just because you take your observations at night. You do not need to window your data.
• The frequency search is gridded more tightly than the traditional "integer number of cycles over the span of observations", eliminating power loss from peaks that fall between the grid points.
• Computational speed: The complexity of the algorithm is O(NlogN), where N is the number of frequencies searched, due to its use of the FFT.

FastCSWT performs a directional continuous wavelet transform on the sphere. The transform is based on the construction of the continuous spherical wavelet transform (CSWT) developed by Antoine and Vandergheynst (1999). A fast implementation of the CSWT (based on the fast spherical convolution developed by Wandelt and Gorski 2001) is also provided.

FastDF (Fast Distribution Function) integrates relativistic particles along geodesics in a comoving periodic volume with forces determined by cosmological linear perturbation theory. Its main application is to set up accurate particle realizations of the linear phase-space distribution of massive relic neutrinos by starting with an analytical solution deep in radiation domination. Such particle realizations are useful for Monte Carlo experiments and provide consistent initial conditions for cosmological N-body simulations. Gravitational forces are calculated from three-dimensional potential grids, which are obtained by convolving random phases with linear transfer functions using Fast Fourier Transforms. The equations of motion are solved using a symplectic leapfrog integration scheme to conserve phase-space density and prevent the build-up of errors. Particles can be exported in different gauges and snapshots are provided in the HDF5 format, compatible with N-body codes like SWIFT (ascl:1805.020) and Gadget-4 (ascl:2204.014). The code has an interface with CLASS (ascl:1106.020) for calculating transfer functions and with monofonIC (ascl:2008.024) for setting up initial conditions with dark matter, baryons, and neutrinos.

Because of their simplicity, axisymmetric mass distributions are often used to model gravitational lenses. Since galaxies are usually observed to have elliptical light distributions, mass distributions with elliptical density contours offer more general and realistic lens models. They are difficult to use, however, since previous studies have shown that the deflection angle (and magnification) in this case can only be obtained by rather expensive numerical integrations. We present a family of lens models for which the deflection can be calculated to high relative accuracy (10-5) with a greatly reduced numerical effort, for small and large ellipticity alike. This makes it easier to use these distributions for modeling individual lenses as well as for applications requiring larger computing times, such as statistical lensing studies. FASTELL is a code to calculate quickly and accurately the lensing deflection and magnification matrix for the softened power-law elliptical mass distribution (SPEMD) lens galaxy model. The SPEMD consists of a softened power-law radial distribution with elliptical isodensity contours.

The FastJet package provides fast native implementations of many sequential recombination algorithms, including the longitudinally invariant kt longitudinally invariant inclusive Cambridge/Aachen and anti-kt jet finders. It also provides a uniform interface to external jet finders via a plugin mechanism. FastJet also includes tools for calculating jet areas and performing background (pileup/UE) subtraction and for jet substructure analyses.

The analysis of weak lensing data requires to account for missing data such as masking out of bright stars. To date, the majority of lensing analyses uses the two point-statistics of the cosmic shear field. These can either be studied directly using the two-point correlation function, or in Fourier space, using the power spectrum. The two-point correlation function is unbiased by missing data but its direct calculation will soon become a burden with the exponential growth of astronomical data sets. The power spectrum is fast to estimate but a mask correction should be estimated. Other statistics can be used but these are strongly sensitive to missing data. The solution that is proposed by FASTLens is to properly fill-in the gaps with only NlogN operations, leading to a complete weak lensing mass map from which one can compute straight forwardly and with a very good accuracy any kind of statistics like power spectrum or bispectrum.

PSF fitting photometry allows a simultaneously fit of a PSF profile on the sources. Many routines use PSF fitting photometry, including IRAF/allstar, Strarfinder, and Convphot. These routines are in general complex to use and slow. FASTPHOT is optimized for prior extraction (the position of the sources is known) and is very fast and simple.

FastPM solves the gravity Possion equation with a boosted particle mesh. Arbitrary time steps can be used. The code is intended to study the formation of large scale structure and supports plain PM and Comoving-Lagranian (COLA) solvers. A broadband correction enforces the linear theory model growth factor at large scale. FastPM scales extremely well to hundred thousand MPI ranks, which is possible through the use of the PFFT Fourier Transform library. The size of mesh in FastPM can vary with time, allowing one to use coarse force mesh at high redshift with increase temporal resolution for accurate large scale modes. The code supports a variety of Greens function and differentiation kernels, though for most practical simulations the choice of kernels does not make a difference. A parameter file interpreter is provided to validate and execute the configuration files without running the simulation, allowing creative usages of the configuration files.

FastQSL calculate the squashing factor Q at the photosphere, a cross section, or a box volume, given a 3D magnetic field with Cartesian, uniform or stretched grids. It is available in IDL and in an optimized version using Fortran for calculations and field line tracing. Use of a GPU accelerates a step-size adaptive scheme for the most computationally intensive part, the field line tracing, making the code fast and efficient.