StringFast implements a method for efficient computation of the C_l spectra induced by a network of strings, which is fast enough to be used in Markov Chain Monte Carlo analyses of future data. This code allows the user to calculate TT, EE, and BB power spectra (scalar [for TT and EE], vector, and tensor modes) for "wiggly" cosmic strings. StringFast uses the output of the public code CMBACT (ascl:1106.023). The properties of the strings are described by four parameters: Gμ—dimensionless string tension; v—rms transverse velocity (as fraction of c); α—"wiggliness"; ξ—comoving correlation length of the string network. It is written as a Fortran 90 module.
MPI-Defrost extends Frolov’s Defrost (ascl:1011.012) to an MPI-based cluster environment. This version has been restricted to a single field. Restoring two-field support should be straightforward, but will require some code changes. Some output options may also not be fully supported under MPI.
This code was produced to support our own work, and has been made available for the benefit of anyone interested in either oscillon simulations or an MPI capable version of Defrost, and it is provided on an "as-is" basis. Andrei Frolov is the primary developer of Defrost and we thank him for placing his work under the GPL (GNU Public License), and thus allowing us to distribute this modified version.
This code is based on the cosmic string model described in this paper by Pogosian and Vachaspati, as well as on the CMBFAST code (ascl:9909.004) created by Uros Seljak and Matias Zaldarriaga. It contains an integrator for the vector contribution to the CMB temperature and polarization. The code is reconfigured to make it easier to use with or without active sources. To produce inflationary CMB spectra one simply sets the string tension to zero (gmu=0.0d0). For a non-zero value of tension only the string contribution is calculated.
An option is added to randomize the directions of velocities of consolidated segments as they evolve in time. In the original segment model, which is still the default version (irandomv=0), each segment is given a random velocity initially, but then continues to move in a straight line for the rest of its life. The new option (irandomv=1) allows to additionally randomize velocities of each segment at roughly each Hubble time. However, the merits of this new option are still under investigation. The default version (irandomv=0) is strongly recommended, since it actually gives reasonable unequal time correlators. For each Fourier mode, k, the string stress-energy components are now evaluated on a time grid sufficiently fine for that k.
A Monte Carlo program for the simulation of electromagnetic cascades initiated by high-energy photons and electrons interacting with extragalactic background light (EBL) is presented. Pair production and inverse Compton scattering on EBL photons as well as synchrotron losses and deflections of the charged component in extragalactic magnetic fields (EGMF) are included in the simulation. Weighted sampling of the cascade development is applied to reduce the number of secondary particles and to speed up computations. As final result, the simulation procedure provides the energy, the observation angle, and the time delay of secondary cascade particles at the present epoch. Possible applications are the study of TeV blazars and the influence of the EGMF on their spectra or the calculation of the contribution from ultrahigh energy cosmic rays or dark matter to the diffuse extragalactic gamma-ray background. As an illustration, we present results for deflections and time-delays relevant for the derivation of limits on the EGMF.
We present a fast Markov Chain Monte-Carlo exploration of cosmological parameter space. We perform a joint analysis of results from recent CMB experiments and provide parameter constraints, including sigma_8, from the CMB independent of other data. We next combine data from the CMB, HST Key Project, 2dF galaxy redshift survey, supernovae Ia and big-bang nucleosynthesis. The Monte Carlo method allows the rapid investigation of a large number of parameters, and we present results from 6 and 9 parameter analyses of flat models, and an 11 parameter analysis of non-flat models. Our results include constraints on the neutrino mass (m_nu < 0.3eV), equation of state of the dark energy, and the tensor amplitude, as well as demonstrating the effect of additional parameters on the base parameter constraints. In a series of appendices we describe the many uses of importance sampling, including computing results from new data and accuracy correction of results generated from an approximate method. We also discuss the different ways of converting parameter samples to parameter constraints, the effect of the prior, assess the goodness of fit and consistency, and describe the use of analytic marginalization over normalization parameters.
RECFAST calculates the recombination of H, HeI, and HeII in the early Universe; this involves a line-by-line treatment of each atomic level. It differs in comparison to previous calculations in two major ways: firstly, the ionization fraction x_e is approximately 10% smaller for redshifts <~800, due to non-equilibrium processes in the excited states of H, and secondly, HeI recombination is much slower than previously thought, and is delayed until just before H recombines. RECFAST enables fast computation of the ionization history (and quantities such as the power spectrum of CMB anisotropies which depend on it) for arbitrary cosmologies.
We present an algorithm to identify the type of an SN spectrum and to determine its redshift and age. This algorithm, based on the correlation techniques of Tonry & Davis, is implemented in the Supernova Identification (SNID) code. It is used by members of ongoing high-redshift SN searches to distinguish between type Ia and type Ib/c SNe, and to identify "peculiar" SNe Ia. We develop a diagnostic to quantify the quality of a correlation between the input and template spectra, which enables a formal evaluation of the associated redshift error. Furthermore, by comparing the correlation redshifts obtained using SNID with those determined from narrow lines in the SN host galaxy spectrum, we show that accurate redshifts (with a typical error less than 0.01) can be determined for SNe Ia without a spectrum of the host galaxy. Last, the age of an input spectrum is determined with a typical 3-day accuracy, shown here by using high-redshift SNe Ia with well-sampled light curves. The success of the correlation technique confirms the similarity of some SNe Ia at low and high redshifts. The SNID code, which is available to the community, can also be used for comparative studies of SN spectra, as well as comparisons between data and models.
GIBIS is a pixel-level simulator of the Gaia mission. It is intended to simulate how the Gaia instruments will observe the sky, using realistic simulations of the astronomical sources and of the instrumental properties. It is a branch of the global Gaia Simulator under development within the Gaia DPAC CU2 Group (Data Simulations). Access is currently restricted to Gaia DPAC teams.
With the increase of personal storage capacity, it is easy to find hundreds to thousands of FITS files in the personal computer of an astrophysicist. Because Flexible Image Transport System (FITS) is a professional data format initiated by astronomers and used mainly in the small community, data management toolkits for FITS files are very few. Astronomers need a powerful tool to help them manage their local astronomical data. Although Virtual Observatory (VO) is a network oriented astronomical research environment, its applications and related technologies provide useful solutions to enhance the management and utilization of astronomical data hosted in an astronomer's personal computer. FITSManager is such a tool to provide astronomers an efficient management and utilization of their local data, bringing VO to astronomers in a seamless and transparent way. FITSManager provides fruitful functions for FITS file management, like thumbnail, preview, type dependent icons, header keyword indexing and search, collaborated working with other tools and online services, and so on. The development of the FITSManager is an effort to fill the gap between management and analysis of astronomical data.
This code combines the spectral sum-conserving methods of Weichselbaum and von Delft and of Peters, Pruschke and Anders (both relying upon the complete basis set construction of Anders and Schiller) with the use of non-Abelian symmetries in a flexible manner: Essentially any non-Abelian symmetry can be taught to the code, and any number of such symmetries can be used throughout the computation for any density of states, and to compute any local operators' correlation function's real and imaginary parts or any thermodynamical expectation value. The code works both at zero and finite temperatures.
Sherpa is the CIAO (ascl:1311.006) modeling and fitting application made available by the Chandra X-ray Center (CXC). It can be used for analysis of images, spectra and time series from many telescopes, including optical telescopes such as Hubble. Sherpa is flexible, modular and extensible. It has an IPython user interface and it is also an importable Python module. Sherpa models, optimization and statistic functions are available via both C++ and Python for software developers wishing to link such functions directly to their own compiled code.
The CIAO 4.3 Sherpa release supports fitting of 1-D X-ray spectra from Chandra and other X-ray missions, as well as 1-D non-X-ray data, including ASCII data arrays, radial profiles, and lightcurves. The options for grating data analysis include fitting the spectrum with multiple response files required for overlapping orders in LETG observations. Modeling of 2-D spatial data is fully supported, including the PSF and exposure maps. User specified models can be added to Sherpa with advanced "user model" functionality.
The objective of this work is to report on the influence of muon interactions on the development of air showers initiated by astroparticles. We make a comparative study of the different theoretical approaches to muon bremsstrahlung and muonic pair production interactions. A detailed algorithm that includes all the relevant characteristics of such processes has been implemented in the AIRES air shower simulation system. We have simulated ultra high energy showers in different conditions in order to measure the influence of these muonic electromagnetic interactions. We have found that during the late stages of the shower development (well beyond the shower maximum) many global observables are significantly modified in relative terms when the mentioned interactions are taken into account. This is most evident in the case of the electromagnetic component of very inclined showers. On the other hand, our simulations indicate that the studied processes do not induce significant changes either in the position of the shower maximum or the structure of the shower front surface.
AMUSE is an open source software framework for large-scale simulations in astrophysics, in which existing codes for gravitational dynamics, stellar evolution, hydrodynamics and radiative transport can be easily coupled and placed in the appropriate observational context.
We have developed a detailed stellar evolution code capable of following the simultaneous evolution of both stars in a binary system, together with their orbital properties. To demonstrate the capabilities of the code we investigate potential progenitors for the Type IIb supernova 1993J, which is believed to have been an interacting binary system prior to its primary exploding. We use our detailed binary stellar evolution code to model this system to determine the possible range of primary and secondary masses that could have produced the observed characteristics of this system, with particular reference to the secondary. Using the luminosities and temperatures for both stars (as determined by Maund et al. 2004) and the remaining mass of the hydrogen envelope of the primary at the time of explosion, we find that if mass transfer is 100 per cent efficient the observations can be reproduced by a system consisting of a 15 solar mass primary and a 14 solar mass secondary in an orbit with an initial period of 2100 days. With a mass transfer efficiency of 50 per cent, a more massive system consisting of a 17 solar mass primary and a 16 solar mass secondary in an initial orbit of 2360 days is needed. We also investigate some of the uncertainties in the evolution, including the effects of tidal interaction, convective overshooting and thermohaline mixing.
The freely available Monte Carlo code REAS for modelling radio emission from cosmic ray air showers has evolved to include the full complexity of air shower physics. REAS3 improves the calculation of the emission contributions, which was not fully consistent in earlier versions of REAS, by incorporating the missing radio emission due to the variation of the number of charged particles during the air shower evolution using an "end-point formalism". With the inclusion of these emission contributions, the structure of the simulated radio pulses changes from unipolar to bipolar, and the azimuthal emission pattern becomes nearly symmetric. Remaining asymmetries can be explained by radio emission due to the variation of the net charge excess in air showers, which is automatically taken into account in the new implementation. REAS3 constitutes the first self-consistent time-domain implementation based on single particle emission taking the full complexity of air shower physics into account, and is freely available for all interested users. REAS3 has been superseded by CoREAS (ascl:1406.003).
The CL-based package XDSPRES is a complete reducing facility for cross-dispersed spectra taken with the Ohio State Infrared Imager/Spectrometer, as installed at the SOAR telescope. This instrument provides spectra in the range between 1.2um and 2.35um in a single exposure, with resolving power of R ~ 1200. XDSPRES consists of two tasks, namely xdflat and doosiris. The former is a completely automated code for preparing normalized flat field images from raw flat field exposures. Doosiris provides a complete reduction pipeline that requires a minimum of user interaction. The user guide explains the general steps towards a fully reduced spectrum.
ARCHANGEL is a Unix-based package for the surface photometry of galaxies. While oriented for large angular size systems (i.e. many pixels), its tools can be applied to any imaging data of any size. The package core contains routines to perform the following critical galaxy photometry functions: sky determination; frame cleaning; ellipse fitting; profile fitting; and total and isophotal magnitudes.
The goal of the package is to provide an automated, assembly-line type of reduction system for galaxy photometry of space-based or ground-based imaging data. The procedures outlined in the documentation are flux independent, thus, these routines can be used for non-optical data as well as typical imaging datasets.
ARCHANGEL has been tested on several current OS's (RedHat Linux, Ubuntu Linux, Solaris, Mac OS X). A tarball for installation is available at the download page. The main routines are Python and FORTRAN based, therefore, a current installation of Python and a FORTRAN compiler are required. The ARCHANGEL package also contains Python hooks to the PGPLOT package, an XML processor and network tools which automatically link to data archives (i.e. NED, HST, 2MASS, etc) to download images in a non-interactive manner.
LIME solves the molecular and atomic excitation and radiation transfer problem in a molecular gas and predicting emergent spectra. The code works in arbitrary three dimensional geometry using unstructured Delaunay latices for the transport of photons. Various physical models can be used as input, ranging from analytical descriptions over tabulated models to SPH simulations. To generate the Delaunay grid we sample the input model randomly, but weigh the sample probability with the molecular density and other parameters, and thereby we obtain an average grid point separation that scales with the local opacity. Slow convergence of opaque models becomes traceable; when convergence between the level populations, the radiation field, and the point separation has been obtained, the grid is ray-traced to produced images that can readily be compared to observations. LIME is particularly well suited for modeling of ALMA data because of the high dynamic range in scales that can be resolved using this type of grid, and can furthermore deal with overlapping lines of multiple molecular and atomic species.
CASA, the Common Astronomy Software Applications package, is being developed with the primary goal of supporting the data post-processing needs of the next generation of radio astronomical telescopes such as ALMA and EVLA. The package can process both interferometric and single dish data. The CASA infrastructure consists of a set of C++ tools bundled together under an iPython interface as a set of data reduction tasks. This structure provides flexibility to process the data via task interface or as a python script. In addition to the data reduction tasks, many post-processing tools are available for even more flexibility and special purpose reduction needs.
We describe an automatic, objective routine for analyzing the clumpy structure in a spectral line position-position-velocity data cube. The algorithm works by first contouring the data at a multiple of the rms noise of the observations, then searches for peaks of emission which locate the clumps, and then follows them down to lower intensities. No a proiri clump profile is assumed. By creating simulated data, we test the performance of the algorithm and show that a contour map most accurately depicts internal structure at a contouring interval equal to twice the rms noise of the map. Blending of clump emission leads to small errors in mass and size determinations and in severe cases can result in a number of clumps being misidentified as a single unit, flattening the measured clump mass spectrum. The algorithm is applied to two real data sets as an example of its use. The Rosette molecular cloud is a 'typical' star-forming cloud, but in the Maddalena molecular cloud high-mass star formation is completely absent. Comparison of the two clump lists generated by the algorithm show that on a one-to-one basis the clumps in the star-forming cloud have higher peak temperatures, higher average densities, and are more gravitationally bound than in the non-star-forming cloud. Collective properties of the clumps, such as temperature-size-line-width-mass relations appear very similar, however. Contrary to the initial results reported in a previous paper (Williams & Blitz 1993), we find that the current, more thoroughly tested analysis finds no significant difference in the clump mass spectrum of the two clouds.
The tool McLuster is an open source code that can be used to either set up initial conditions for N-body computations or, alternatively, to generate artificial star clusters for direct investigation. There are two different versions of the code, one basic version for generating all kinds of unevolved clusters (in the following called mcluster) and one for setting up evolved stellar populations at a given age. The former is completely contained in the C file main.c. The latter (dubbed mcluster_sse) is more complex and requires additional FORTRAN routines, namely the Single-Star Evolution (SSE) routines by Hurley, Pols & Tout (ascl:1303.015) that are provided with the McLuster code.
SIGPROC is a package designed to standardize the initial analysis of the many types of fast-sampled pulsar data. Currently recognized machines are the Wide Band Arecibo Pulsar Processor (WAPP), the Penn State Pulsar Machine (PSPM), the Arecibo Observatory Fourier Transform Machine (AOFTM), the Berkeley Pulsar Processors (BPP), the Parkes/Jodrell 1-bit filterbanks (SCAMP) and the filterbank at the Ooty radio telescope (OOTY). The SIGPROC tools should help users look at their data quickly, without the need to write (yet) another routine to read data or worry about big/little endian compatibility (byte swapping is handled automatically).
PRESTO is a large suite of pulsar search and analysis software. It was primarily designed to efficiently search for binary millisecond pulsars from long observations of globular clusters (although it has since been used in several surveys with short integrations and to process a lot of X-ray data as well). To date, PRESTO has discovered well over a hundred and fifty pulsars, including approximately 100 recycled pulsars, about 80 of which are in binaries. It is written primarily in ANSI C, with many of the recent routines in Python.
Written with portability, ease-of-use, and memory efficiency in mind, it can currently handle raw data from the following pulsar machines or formats:
- PSRFITS search-format data (as from GUPPI at the GBT and the Mock Spectrometers at Arecibo)
- SPIGOT at the GBT
- Most Wideband Arecibo Pulsar Processor (WAPP) at Arecibo
- The Parkes and Jodrell Bank 1-bit filterbank formats
- Berkeley-Caltech Pulsar Machine (BCPM) at the GBT (may it RIP...)
- 8-bit filterbank format from SIGPROC (other formats will be added if required)
- A time series composed of single precision (i.e. 4-byte) floating point data
- Photon arrival times (or events) in ASCII or double-precision binary formats
HEALPix is an acronym for Hierarchical Equal Area isoLatitude Pixelization of a sphere. As suggested in the name, this pixelization produces a subdivision of a spherical surface in which each pixel covers the same surface area as every other pixel. Another property of the HEALPix grid is that the pixel centers occur on a discrete number of rings of constant latitude, the number of constant-latitude rings is dependent on the resolution of the HEALPix grid.
PSRPOP is a package developed to model the Galactic population and evolution of radio pulsars. It is a collection of modules written in Fortran77 for an analysis of a large sample of pulsars detected by the Parkes Multibeam Pulsar Survey. The main programs are: 1.) populate, which creates a model Galaxy of pulsars distributed according according to various assumptions; 2.) survey, which searches the model galaxies generated using populate using realistic models of pulsar surveys; and 3.) visualize, a Tk/PGPLOT script to plot various aspects of model detected pulsars from survey. A sample screenshot from visualize can be found here.
The IMCAT software was developed initially to do faint galaxy photometry for weak lensing studies, and provides a fairly complete set of tools for this kind of work. Unlike most packages for doing data analysis, the tools are standalone unix commands which you can invoke from the shell, via shell scripts or from perl scripts. The tools are arranges in a tree of directories. One main branch is the ’imtools’. These deal only with fits files. The most important imtool is the ’image calculator’ ’ic’ which allows one to do rather general operations on fits images. A second branch is the ’catools’ which operate only on catalogues. The key cattool is ’lc’; this effectively defines the format of IMCAT catalogues, and allows one to do very general operations on and filtering of such catalogues. A third branch is the ’imcattools’. These tend to be much more specialised than the cattools and imcattools and are focussed on faint galaxy photometry.
Current and upcoming wide-field, ground-based, broad-band imaging surveys promise to address a wide range of outstanding problems in galaxy formation and cosmology. Several such uses of ground-based data, especially weak gravitational lensing, require highly precise measurements of galaxy image statistics with careful correction for the effects of the point-spread function (PSF). The SHERA (SHEar Reconvolution Analysis) software simulates ground-based imaging data with realistic galaxy morphologies and observing conditions, starting from space-based data (from COSMOS, the Cosmological Evolution Survey) and accounting for the effects of the space-based PSF. This code simulates ground-based data, optionally with a weak lensing shear applied, in a model-independent way using a general Fourier space formalism. The utility of this pipeline is that it allows for a precise, realistic assessment of systematic errors due to the method of data processing, for example in extracting weak lensing galaxy shape measurements or galaxy radial profiles, given user-supplied observational conditions and real galaxy morphologies. Moreover, the simulations allow for the empirical test of error estimates and determination of parameter degeneracies, via generation of many noise maps. The public release of this software, along with a large sample of cleaned COSMOS galaxy images (corrected for charge transfer inefficiency), should enable upcoming ground-based imaging surveys to achieve their potential in the areas of precision weak lensing analysis, galaxy profile measurement, and other applications involving detailed image analysis.
This code is no longer maintained and has been superseded by GalSim (ascl:1402.009).
WCSLIB is a C library, supplied with a full set of Fortran wrappers, that implements the "World Coordinate System" (WCS) standard in FITS (Flexible Image Transport System). It also includes a PGPLOT-based routine, PGSBOX, for drawing general curvilinear coordinate graticules and a number of utility programs.
Galacticus is designed to solve the physics involved in the formation of galaxies within the current standard cosmological framework. It is of a type of model known as “semi-analytic” in which the numerous complex non-linear physics involved are solved using a combination of analytic approximations and empirical calibrations from more detailed, numerical solutions. Models of this type aim to begin with the initial state of the Universe (specified shortly after the Big Bang) and apply physical principles to determine the properties of galaxies in the Universe at later times, including the present day. Typical properties computed include the mass of stars and gas in each galaxy, broad structural properties (e.g. radii, rotation speeds, geometrical shape etc.), dark matter and black hole contents, and observable quantities such as luminosities, chemical composition etc.
Gaepsi is a PYTHON extension for visualizing cosmology simulations produced by Gadget. Visualization is the most important facet of Gaepsi, but it also allows data analysis on GADGET simulations with its growing number of physics related subroutines and constants. Unlike mesh based scheme, SPH simulations are directly visible in the sense that a splatting process is required to produce raster images from the simulations. Gaepsi produces images of 2-dimensional line-of-sight projections of the simulation. Scalar fields and vector fields are both supported.
Besides the traditional way of slicing a simulation, Gaepsi also has built-in support of 'Survey-like' domain transformation proposed by Carlson & White. An improved implementation is used in Gaepsi. Gaepsi both implements an interactive shell for plotting and exposes its API for batch processing. When complied with OpenMP, Gaepsi automatically takes the advantage of the multi-core computers. In interactive mode, Gaepsi is capable of producing images of size up to 32000 x 32000 pixels. The user can zoom, pan and rotate the field with a command in on the finger tip. The interactive mode takes full advantages of matplotlib's rich annotating, labeling and image composition facilities. There are also built-in commands to add objects that are commonly used in cosmology simulations to the figures.
The study of stellar populations in galaxies is entering a new era with the availability of large and high quality databases of both observed galactic spectra and state-of-the-art evolutionary synthesis models. The power of spectral synthesis can be investigated as a mean to estimate physical properties of galaxies. Spectral synthesis is nothing more than the decomposition of an observed spectrum in terms of a superposition of a base of simple stellar populations of various ages and metallicities, producing astrophysically interesting output such as the star-formation and chemical enrichment histories of a galaxy, its extinction and velocity dispersion. This is what the STARLIGHT spectral synthesis code does.
PÉGASE (Projet d'Étude des GAlaxies par Synthèse Évolutive) is a code to compute the spectral evolution of galaxies. The evolution of the stars, gas and metals is followed for a law of star formation and a stellar initial mass function. The stellar evolutionary tracks extend from the main sequence to the white dwarf stage. The emission of the gas in HII regions is also taken into account. The main improvement in version 2 is the use of evolutionary tracks of different metallicities (from 10-4 to 5×solar). The effect of extinction by dust is also modelled using a radiative transfer code. PÉGASE.2 uses the BaSeL library of stellar spectra and can therefore synthesize low-resolution (R~200) ultraviolet to near-infrared spectra of Hubble sequence galaxies as well as of starbursts.
PÉGASE-HR is a code aimed at computing synthetic evolutive optical spectra of galaxies with a very high resolution (R=10 000, or dlambda=0.55) in the range Lambda=[4000, 6800] Angstroms. PÉGASE-HR is the result of combining the code PÉGASE.2 with the high-resolution stellar library ÉLODIE. This code can also be used at low resolution (R=200) over the range covered by the BaSeL library (from far UV to the near IR), and then produces the same results as PÉGASE.2. In PEGASE-HR, the BaSeL library is replaced by a grid of spectra interpolated from the high-resolution ÉLODIE library of stellar spectra. The ÉLODIE library is a stellar database of 1959 spectra for 1503 stars, observed with the echelle spectrograph ÉLODIE on the 193 cm telescope at the Observatoire de Haute Provence.
LePHARE is a set of Fortran commands to compute photometric redshifts and to perform SED fitting. The latest version includes new features with FIR fitting and a more complete treatment of physical parameters and uncertainties based on PÉGASE and Bruzual & Charlot population synthesis models. The program is based on a simple chi2 fitting method between the theoretical and observed photometric catalogue. A simulation program is also available in order to generate realistic multi-colour catalogues taking into account observational effects.
From a photometric catalogue, hyperz finds the redshift of each object by means of a standard SED fitting procedure, i.e. comparing the observed magnitudes with the expected ones, computed from template Spectral Energy Distributions. The set of templates used in the minimization procedure (age, metallicity, reddening, absorption in the Lyman forest, ...) is studied in detail, through both real and simulated data. The expected accuracy of photometric redshifts, as well as the fraction of catastrophic identifications and wrong detections, is given as a function of the redshift range, the set of filters considered, and the photometric accuracy. Special attention is paid to the results expected from real data.
Photometric redshift estimation is becoming an increasingly important technique, although the currently existing methods present several shortcomings which hinder their application. Most of those drawbacks are efficiently eliminated when Bayesian probability is consistently applied to this problem. The use of prior probabilities and Bayesian marginalization allows the inclusion of valuable information, e.g. the redshift distributions or the galaxy type mix, which is often ignored by other methods. In those cases when the a priori information is insufficient, it is shown how to `calibrate' the prior distributions, using even the data under consideration. There is an excellent agreement between the 108 HDF spectroscopic redshifts and the predictions of the method, with a rms error Delta z/(1+z_spec) = 0.08 up to z<6 and no systematic biases nor outliers. The results obtained are more reliable than those of standard techniques even when the latter include near-IR colors. The Bayesian formalism developed here can be generalized to deal with a wide range of problems which make use of photometric redshifts, e.g. the estimation of individual galaxy characteristics as the metallicity, dust content, etc., or the study of galaxy evolution and the cosmological parameters from large multicolor surveys. Finally, using Bayesian probability it is possible to develop an integrated statistical method for cluster mass reconstruction which simultaneously considers the information provided by gravitational lensing and photometric redshifts.
TITAN is a general-purpose radiation hydrodynamics code developed at the Laboratory for Computational Astrophysics (NCSA, University of Illinois at Urbana-Champaign). TITAN solves the coupled sets of radiation transfer and fluid dynamics equations on an adaptive mesh in one spatial dimension.
STELLA is a one-dimensional multi-group radiation hydrodynamics code. STELLA incorporates implicit hydrodynamics coupled to a multi-group non-equilibrium radiative transfer for modeling SN II-L light curves. The non-equilibrium description of radiation is crucial for this problem since the presupernova envelope may be of low mass and very dilute. STELLA implicitly treats time dependent equations of the angular moments of intensity averaged over a frequency bin. Local thermodynamic equilibrium is assumed to determine the ionization levels of materials.
RADICAL is a multi-purpose 2-D radiative transfer code for axi-symmetric circumstellar (or circum-black-hole) envelopes /disks / tori etc. It has been extensively tested and found reliable and accurate. The code has recently been supplemented with a Variable Eddington Tensor module which enables it to solve dust continuum radiative transfer problems from very low up to extremely high optical depths with only a few (about 7) iterations at most.
DISKSTRUCT is a simple 1+1-D code for modeling protoplanetary disks. It is not based on multidimensional radiative transfer! Instead, a flaring-angle recipe is used to compute the irradiation of the disk, while the disk vertical structure at each cylindrical radius is computed in a 1-D fashion; the models computed with this code are therefore approximate. Moreover, this model cannot deal with the dust inner rim.
In spite of these simplifications and drawbacks, the code can still be very useful for disk studies, for the following reasons:
RADMC is a 2-D Monte-Carlo code for dust continuum radiative transfer circumstellar disks and envelopes. It is based on the method of Bjorkman & Wood (ApJ 2001, 554, 615), but with several modifications to produce smoother results with fewer photon packages.
SHELLSPEC calculates lightcurves, spectra and images of interacting binaries and extrasolar planets immersed in a moving circumstellar environment which is optically thin. It solves simple radiative transfer along the line of sight in moving media. The assumptions include LTE and optional known state quantities and velocity fields in 3D. Optional (non)transparent objects such as a spot, disc, stream, jet, shell or stars as well as an empty space may be defined (embedded) in 3D and their composite synthetic spectrum calculated. Roche model can be used as a boundary condition for the radiative tranfer. A related code based on SHELLSPEC, Pyshellspec (ascl:2106.006), solves the inverse problem of finding the stellar and orbital parameters.
STECKMAP stands for STEllar Content and Kinematics via Maximum A Posteriori likelihood. It is a tool for interpreting galaxy spectra in terms of their stellar populations through the derivation of their star formation history, age-metallicity relation, kinematics and extinction. The observed spectrum is projected onto a temporal sequence of models of single stellar populations, so as to determine a linear combination of these models that best fits the observed spectrum. The weights of the various components of this linear combination indicate the stellar content of the population. This procedure is regularized using various penalizing functions. The principles of the method are detailed in Ocvirk et al. 2006.
The basic mechanisms responsible for producing winds from cool, late-type stars are still largely unknown. We take inspiration from recent progress in understanding solar wind acceleration to develop a physically motivated model of the time-steady mass loss rates of cool main-sequence stars and evolved giants. This model follows the energy flux of magnetohydrodynamic turbulence from a subsurface convection zone to its eventual dissipation and escape through open magnetic flux tubes. We show how Alfven waves and turbulence can produce winds in either a hot corona or a cool extended chromosphere, and we specify the conditions that determine whether or not coronal heating occurs. These models do not utilize arbitrary normalization factors, but instead predict the mass loss rate directly from a star's fundamental properties. We take account of stellar magnetic activity by extending standard age-activity-rotation indicators to include the evolution of the filling factor of strong photospheric magnetic fields. We compared the predicted mass loss rates with observed values for 47 stars and found significantly better agreement than was obtained from the popular scaling laws of Reimers, Schroeder, and Cuntz. The algorithm used to compute cool-star mass loss rates is provided as a self-contained and efficient IDL computer code. We anticipate that the results from this kind of model can be incorporated straightforwardly into stellar evolution calculations and population synthesis techniques.
PySpecKit is a Python spectroscopic analysis and reduction toolkit meant to be generally applicable to optical, infrared, and radio spectra. It is capable of reading FITS-standard and many non-standard file types including CLASS spectra. It contains procedures for line fitting including gaussian and voigt profile fitters, and baseline-subtraction routines. It is capable of more advanced line fitting using arbitrary model grids. Fitting can be done both in batch mode and interactively. PySpecKit also produces publication-quality plots with TeX axis labels and annotations. It is designed to be extensible, allowing user-written reader, writer, and fitting routines to be "plugged in." It is actively under development and currently in the 'alpha' phase, with plans for a beta release.
The goal of the development of the Aarhus Adiabatic Oscillation Package was to have a simple and efficient tool for the computation of adiabatic oscillation frequencies and eigenfunctions for general stellar models, emphasizing also the accuracy of the results. The Fortran code offers considerable flexibility in the choice of integration method as well as ability to determine all frequencies of a given model, in a given range of degree and frequency. Development of the Aarhus adiabatic pulsation code started around 1978. Although the main features have been stable for more than a decade, development of the code is continuing, concerning numerical properties and output. The code has been provided as a generally available package and has seen substantial use at a number of installations. Further development of the package, including bringing the documentation closer to being up to date, is planned as part of the HELAS Coordination Action.
SKIRT is a radiative transfer code based on the Monte Carlo technique. The name SKIRT, acronym for Stellar Kinematics Including Radiative Transfer, reflects the original motivation for its creation: it has been developed to study the effects of dust absorption and scattering on the observed kinematics of dusty galaxies. In a second stage, the SKIRT code was extended with a module to self-consistently calculate the dust emission spectrum under the assumption of local thermal equilibrium. This LTE version of SKIRT has been used to model the dust extinction and emission of various types of galaxies, as well as circumstellar discs and clumpy tori around active galactic nuclei. A new, extended version of SKIRT code can perform efficient 3D radiative transfer calculations including a self-consistent calculation of the dust temperature distribution and the associated FIR/submm emission with a full incorporation of the emission of transiently heated grains and PAH molecules.
A big challenge in solar and stellar physics in the coming years will be to decipher the magnetism of the solar outer atmosphere (chromosphere and corona) along with its dynamic coupling with the magnetic fields of the underlying photosphere. To this end, it is important to develop rigorous diagnostic tools for the physical interpretation of spectropolarimetric observations in suitably chosen spectral lines. HAZEL is a computer program for the synthesis and inversion of Stokes profiles caused by the joint action of atomic level polarization and the Hanle and Zeeman effects in some spectral lines of diagnostic interest, such as those of the He I 1083.0 nm and 587.6 nm (or D3) multiplets. It is based on the quantum theory of spectral line polarization, which takes into account in a rigorous way all the relevant physical mechanisms and ingredients (optical pumping, atomic level polarization, level crossings and repulsions, Zeeman, Paschen-Back and Hanle effects). The influence of radiative transfer on the emergent spectral line radiation is taken into account through a suitable slab model. The user can either calculate the emergent intensity and polarization for any given magnetic field vector or infer the dynamical and magnetic properties from the observed Stokes profiles via an efficient inversion algorithm based on global optimization methods.
PolSpice (aka Spice) is a tool to statistically analyze Cosmic Microwave Background (CMB) data, as well as any other diffuse data pixelized on the sphere.
This Fortran90 program measures the 2 point auto (or cross-) correlation functions w(θ) and the angular auto- (or cross-) power spectra C(l) from one or (two) sky map(s) of Stokes parameters (intensity I and linear polarisation Q and U). It is based on the fast Spherical Harmonic Transforms allowed by isolatitude pixelisations such as Healpix [for Npix pixels over the whole sky, and a C(l) computed up to l=lmax, PolSpice complexity scales like Npix1/2 lmax2 instead of Npix lmax2]. It corrects for the effects of the masks and can deal with inhomogeneous weights given to the pixels of the map. In the case of polarised data, the mixing of the E and B modes due to the cut sky and pixel weights can be corrected for to provide an unbiased estimate of the "magnetic" (B) component of the polarisation power spectrum. Most of the code is parallelized for shared memory (SMP) architecture using OpenMP.
We present further development and the first public release of our multimodal nested sampling algorithm, called MultiNest. This Bayesian inference tool calculates the evidence, with an associated error estimate, and produces posterior samples from distributions that may contain multiple modes and pronounced (curving) degeneracies in high dimensions. The developments presented here lead to further substantial improvements in sampling efficiency and robustness, as compared to the original algorithm presented in Feroz & Hobson (2008), which itself significantly outperformed existing MCMC techniques in a wide range of astrophysical inference problems. The accuracy and economy of the MultiNest algorithm is demonstrated by application to two toy problems and to a cosmological inference problem focusing on the extension of the vanilla $Lambda$CDM model to include spatial curvature and a varying equation of state for dark energy. The MultiNest software is fully parallelized using MPI and includes an interface to CosmoMC (ascl:1106.025). It will also be released as part of the SuperBayeS package (ascl:1109.007) for the analysis of supersymmetric theories of particle physics.
SuperBayeS is a package for fast and efficient sampling of supersymmetric theories. It uses Bayesian techniques to explore multidimensional SUSY parameter spaces and to compare SUSY predictions with observable quantities, including sparticle masses, collider observables, dark matter abundance, direct detection cross sections, indirect detection quantities etc. Scanning can be performed using Markov Chain Monte Carlo (MCMC) technology or even more efficiently by employing a new scanning technique called MultiNest (ascl:1109.006). which implements the nested sampling algorithm. Using MultiNest, a full 8-dimensional scan of the CMSSM takes about 12 hours on 10 2.4GHz CPUs. There is also an option for old-style fixed-grid scanning. A discussion forum for SuperBayeS is available.
The package combines SoftSusy, DarkSusy, FeynHiggs, Bdecay, MultiNest and MicrOMEGAs. Some of the routines and the plotting tools are based on CosmoMC.
SuperBayeS comes with SuperEGO, a MATLAB graphical user interface tool for interactive plotting of the results. SuperEGO has been developed by Rachid Lemrani and is based on CosmoloGUI by Sarah Bridle.
We propose a novel representation of cosmic microwave anisotropy maps, where each multipole order l is represented by l unit vectors pointing in directions on the sky and an overall magnitude. These "multipole vectors and scalars" transform as vectors under rotations. Like the usual spherical harmonics, multipole vectors form an irreducible representation of the proper rotation group SO(3). However, they are related to the familiar spherical harmonic coefficients, alm, in a nonlinear way, and are therefore sensitive to different aspects of the CMB anisotropy. Nevertheless, it is straightforward to determine the multipole vectors for a given CMB map and we present an algorithm to compute them. Using the WMAP full-sky maps, we perform several tests of the hypothesis that the CMB anisotropy is statistically isotropic and Gaussian random. We find that the result from comparing the oriented area of planes defined by these vectors between multipole pairs 2<=l1!=l2<=8 is inconsistent with the isotropic Gaussian hypothesis at the 99.4% level for the ILC map and at 98.9% level for the cleaned map of Tegmark et al. A particular correlation is suggested between the l=3 and l=8 multipoles, as well as several other pairs. This effect is entirely different from the now familiar planarity and alignment of the quadrupole and octupole: while the aforementioned is fairly unlikely, the multipole vectors indicate correlations not expected in Gaussian random skies that make them unusually likely. The result persists after accounting for pixel noise and after assuming a residual 10% dust contamination in the cleaned WMAP map. While the definitive analysis of these results will require more work, we hope that multipole vectors will become a valuable tool for various cosmological tests, in particular those of cosmic isotropy.
CMBquick is a package for Mathematica in which tools are provided to compute the spectrum and bispectrum of Cosmic Microwave Background (CMB). It is unavoidably slow, but the main goal is not to design a tool which can be used for systematic exploration of parameters in cosmology, but rather a toy CMB code which is transparent and easily modified. Considering this, the name chosen is nothing but a joke which refers to the widely spread and used softwares CMBFAST, CAMB or CMBeasy (ascl:1007.004), which should be used for serious and heavy first order CMB computations, and which are indeed very fast.
The package CMBquick is unavoidably slow when it comes to compute the multipoles Cls, and most of it is due to the access time for variables which in Mathematica is approximately ten times slower than in C or Fortran. CMBquick is thus approximately 10 times slower than CAMB and cannot be used for the same reasons. It uses the same method as CAMB for computing the CMB spectrum, which is based on the line of sight approach. However the integration is performed in a different gauge with different time steps and k-spacing. It benefits from the power of Mathematica on numerical resolution of stiff differential systems, and the transfer functions can be obtained with exquisite accuracy.
The purpose of CMBquick is thus twofold. First, CMBquick is a slow but precise and pedagogical, tool which can be used to explore and modify the physical content of the linear and non-linear dynamics. Second, it is a tool which can help developing templates for nonlinear computations, which could then be hard coded once their correctness is checked. The number of equations for non-linear dynamics is quite sizable and CMBquick makes it easy (but slow) to manipulate the non-linear equations, to solve them precisely, and to plot them.
PyModelFit provides a pythonic, object-oriented framework that simplifies the task of designing numerical models to fit data. This is a very broad task, and hence the current functionality of PyModelFit focuses on the simpler tasks of 1D curve-fitting, including a GUI interface to simplify interactive work (using Enthought Traits). For more complicated modeling, PyModelFit also provides a wide range of classes and a framework to support more general model/data types (2D to Scalar, 3D to Scalar, 3D to 3D, and so on).
GalactICS generates N-body realizations of axisymmetric galaxy models consisting of disk, bulge and halo. Some of the code is in Fortran 77, using lines longer than 72 characters in some cases. The -e flag in the makefile allow for this for a Solaris f77 compiler. Other programs are written in C. Again, the linking between these routines works on Solaris systems, but may need to be adjusted for other architectures. We have found that linking using f77 instead of ld will often automatically load the appropriate libraries.
The graphics output by some of the programs (dbh, plotforce, diskdf, plothalo) uses the PGPLOT library. Alternatively, remove all calls to routines with names starting with "PG", as well as the -lpgplot flag in the Makefile, and the programs should still run fine.
We present a method to numerically estimate the densities of a discretely sampled data based on a binary space partitioning tree. We start with a root node containing all the particles and then recursively divide each node into two nodes each containing roughly equal number of particles, until each of the nodes contains only one particle. The volume of such a leaf node provides an estimate of the local density and its shape provides an estimate of the variance. We implement an entropy-based node splitting criterion that results in a significant improvement in the estimation of densities compared to earlier work. The method is completely metric free and can be applied to arbitrary number of dimensions. We use this method to determine the appropriate metric at each point in space and then use kernel-based methods for calculating the density. The kernel-smoothed estimates were found to be more accurate and have lower dispersion. We apply this method to determine the phase-space densities of dark matter haloes obtained from cosmological N-body simulations. We find that contrary to earlier studies, the volume distribution function v(f) of phase-space density f does not have a constant slope but rather a small hump at high phase-space densities. We demonstrate that a model in which a halo is made up by a superposition of Hernquist spheres is not capable in explaining the shape of v(f) versus f relation, whereas a model which takes into account the contribution of the main halo separately roughly reproduces the behaviour as seen in simulations. The use of the presented method is not limited to calculation of phase-space densities, but can be used as a general purpose data-mining tool and due to its speed and accuracy it is ideally suited for analysis of large multidimensional data sets.
I introduce a new code for fast calculation of the Lomb-Scargle periodogram, that leverages the computing power of graphics processing units (GPUs). After establishing a background to the newly emergent field of GPU computing, I discuss the code design and narrate key parts of its source. Benchmarking calculations indicate no significant differences in accuracy compared to an equivalent CPU-based code. However, the differences in performance are pronounced; running on a low-end GPU, the code can match 8 CPU cores, and on a high-end GPU it is faster by a factor approaching thirty. Applications of the code include analysis of long photometric time series obtained by ongoing satellite missions and upcoming ground-based monitoring facilities; and Monte-Carlo simulation of periodogram statistical properties.
Flux-averaging justifies the use of the distance-redshift relation for a smooth universe in the analysis of type Ia supernova (SN Ia) data. Flux-averaging of SN Ia data is required to yield cosmological parameter constraints that are free of the bias induced by weak gravitational lensing. SN Ia data are converted into flux. For a given cosmological model, the distance dependence of the data is removed, then the data are binned in redshift, and placed at the average redshift in each redshift bin. The likelihood of the given cosmological model is then computed using "flux statistics''. These Fortran codes compute the likelihood of an arbitrary cosmological model [with given H(z)/H_0] using flux-averaged Type Ia supernova data.
WCSTools is a package of programs and a library of utility subroutines for setting and using the world coordinate systems (WCS) in the headers of the most common astronomical image formats, FITS and IRAF .imh, to relate image pixels to sky coordinates. In addition to dealing with image WCS information, WCSTools has extensive catalog search, image header manipulation, and coordinate and time conversion tasks. This software is all written in very portable C, so it should compile and run on any computer with a C compiler.
aXe is a spectroscopic data extraction software package that was designed to handle large format spectroscopic slitless images such as those from the Wide Field Camera 3 (WFC3) and the Advanced Camera for Surveys (ACS) on HST. aXe is a PyRAF/IRAF package that consists of several tasks and is distributed as part of the Space Telescope Data Analysis System (STSDAS). The various aXe tasks perform specific parts of the extraction and calibration process and are successively used to produce extracted spectra.
We describe the InfraRed Data Reduction (IRDR) software package, a small ANSI C library of fast image processing routines for automated pipeline reduction of infrared (dithered) observations. We developed the software to satisfy certain design requirements not met in existing packages (e.g., full weight map handling) and to optimize the software for large data sets (non-interactive tasks that are CPU and disk efficient). The software includes stand-alone C programs for tasks such as running sky frame subtraction with object masking, image registration and coaddition with weight maps, dither offset measurement using cross-correlation, and object mask dilation. Although we currently use the software to process data taken with CIRSI (a near-IR mosaic imager), the software is modular and concise and should be easy to adapt/reuse for other work.
GIPSY is an acronym of Groningen Image Processing SYstem. It is a highly interactive software system for the reduction and display of astronomical data. It supports multi-tasking using a versatile user interface, it has an advanced data structure, a powerful script language and good display facilities based on the X Window system.
GIPSY consists of a number of components which can be divided into a number of classes: 1.) The user interfaces. Currently two user interfaces are available; one for interactive work and one for batch processing. 2.) The data structure. 3.) The display utilities. 4.) The application programs. These are the majority of programs.
GIPSY was designed originally for the reduction of interferometric data from the Westerbork Synthesis Radio Telescope, but in its history of more than 20 years it has grown to a system capable of handling data from many different instruments (e.g. TAURUS, IRAS etc.).
SkyCat is a tool that combines visualization of images and access to catalogs and archive data for astronomy. The tool, developed in Tcl/Tk, was originally conceived as a demo of the capabilities of the class library that was developed for the VLT. The Skycat sources currently consist of five packages:
• Tclutil - Generic Tcl and C++ utilities
• Astrotcl - Astronomical Tcl and C++ utilities
• RTD - Real-time Display classes and widgets
• Catlib - Catalog library and widgets
• Skycat - Skycat application and library package
All of the required packages are always included in the tarfile.
A radiative transfer code designed to solve the radiative transfer and statistical equilibrium equations in spherical geometry. It has been designed for application to W-R stars, O stars, and Luminous Blue-Variables. CMFGEN allows fundamental parameters such as effective temperatures, stellar radii and stellar luminosities to be determined. It can provide constraints on mass-loss rates, and allow abundance determinations for a wide range of atomic species. Further it can provide accurate energy distributions, and hence ionizing fluxes, which can be used as input for codes which model the spectra of HII regions and ring nebular.
TLUSTY is a user-oriented package written in FORTRAN77 for modeling stellar atmospheres and accretion disks and wide range of spectroscopic diagnostics. In the program's maximum configuration, the user may start from scratch and calculate a model atmosphere of a chosen degree of complexity, and end with a synthetic spectrum in a wavelength region of interest for an arbitrary stellar rotation and an arbitrary instrumental profile. The user may also model the vertical structure of annuli of an accretion disk.
Synspec is a user-oriented package written in FORTRAN for modeling stellar atmospheres and for stellar spectroscopic diagnostics. It assumes an existing model atmosphere, calculated previously with Tlusty or taken from the literature (for instance, from the Kurucz grid of models). The opacity sources (continua, atomic and molecular lines) are fully specified by the user. An arbitrary stellar rotation and instrumental profile can be applied to the synthetic spectrum.
MOKA simulates the gravitational lensing signal from cluster-sized haloes. This algorithm implements recent results from numerical simulations to create realistic lenses with properties independent of numerical resolution and can be used for studies of the strong lensing cross section in dependence of halo structure.
Jupiter is a multidimensional astrophysical hydrocode. It is based on a Godunov method, and it is parallelized with MPI. The mesh geometry can either be cartesian, cylindrical or spherical. It allows mesh refinement and includes special features adapted to the description of planets embedded in disks and nearly steady states.
This code contains several simple radiative transfer models used for fitting the blue-asymmetric spectral line signature often found in infalling molecular cloud cores. It attempts to provide a direct measure of several physical parameters of the infalling core, including infall velocity, excitation temperature, and line of site optical depth. The code includes 6 radiative transfer models, however the conclusion of the associated paper is that the 5 parameter "hill" model (hill5) is most likely the best match to the physical excitation conditions of real infalling Bonnor-Ebert type clouds.
DarkSUSY, written in Fortran, is a publicly-available advanced numerical package for neutralino dark matter calculations. In DarkSUSY one can compute the neutralino density in the Universe today using precision methods which include resonances, pair production thresholds and coannihilations. Masses and mixings of supersymmetric particles can be computed within DarkSUSY or with the help of external programs such as FeynHiggs, ISASUGRA and SUSPECT. Accelerator bounds can be checked to identify viable dark matter candidates. DarkSUSY also computes a large variety of astrophysical signals from neutralino dark matter, such as direct detection in low-background counting experiments and indirect detection through antiprotons, antideuterons, gamma-rays and positrons from the Galactic halo or high-energy neutrinos from the center of the Earth or of the Sun.
The iGalFit suite of IDL routines interactively runs GALFIT whereby the various surface brightness profiles (and their associated parameters) are represented by regions, which the user is expected to place. The regions may be saved and/or loaded from the ASCII format used by ds9 or in the Hierarchical Data Format (version 5). The software has been tested to run stably on Mac OS X and Linux with IDL 7.0.4. In addition to its primary purpose of modeling galaxy images with GALFIT, this package has several ancillary uses, including a flexible image display routines, several basic photometry functions, and qualitatively assessing Source Extractor.
SHTOOLS performs (among others) spherical harmonic transforms and reconstructions, rotations of spherical harmonic coefficients, and multitaper spectral analyses on the sphere. The package accommodates any standard normalization of the spherical harmonic functions ("geodesy" 4π normalized, Schmidt semi-normalized, orthonormalized, and unnormalized), and either real or complex spherical harmonics can be employed. Spherical harmonic transforms are calculated by exact quadrature rules using either (1) the sampling theorem of Driscoll and Healy (1994) where data are equally sampled (or spaced) in latitude and longitude, or (2) Gauss-Legendre quadrature. A least squares inversion routine for irregularly sampled data is included as well. The Condon-Shortley phase factor of (-1)m can be used or excluded with the associated Legendre functions. The spherical harmonic transforms are accurate to approximately degree 2800, corresponding to a spatial resolution of better than 4 arc minutes. Routines are included for performing localized multitaper spectral analyses and standard gravity calculations, such as computation of the geoid, and the determination of the potential associated with finite-amplitude topography. The routines are fast. Spherical harmonic transforms and reconstructions take on the order of 1 second for bandwidths less than 600 and about 3 minutes for bandwidths close to 2800.
The current version of the Zurich Extragalactic Bayesian Redshift Analyzer (ZEBRA) combines and extends several of the classical approaches to produce accurate photometric redshifts down to faint magnitudes. In particular, ZEBRA uses the template-fitting approach to produce Maximum Likelihood and Bayesian redshift estimates based on: (1.) An automatic iterative technique to correct the original set of galaxy templates to best represent the SEDs of real galaxies at different redshifts; (2.) A training set of spectroscopic redshifts for a small fraction of the photometric sample; and (3.) An iterative technique for Bayesian redshift estimates, which extracts the full two-dimensional redshift and template probability function for each galaxy.
STIFF converts scientific FITS images to the more popular TIFF format for illustration purposes. Most FITS readers and converters do not do a proper job at converting FITS image data to 8 bits. 8-bit images stored in JPEG, PNG or TIFF files have the intensities implicitly stored in a non-linear way. Most current FITS image viewers and converters provide the user an incorrect translation of the FITS image content by simply rescaling linearly input pixel values. A first consequence is that the people working on astronomical images usually have to apply narrow intensity cuts or square-root or logarithmic intensity transformations to actually see something on their deep-sky images. A less obvious consequence is that colors obtained by combining images processed this way are not consistent across such a large range of surface brightnesses. Though with other software the user is generally afforded a choice of nonlinear transformations to apply in order to make the faint stuff stand out more clearly in the images, with the limited selection of choices provides, colors will not be accurately rendered, and some manual tweaking will be necessary. The purpose of STIFF is to produce beautiful pictures in an automatic and consistent way.
The GammaLib is a versatile toolbox for the high-level analysis of astronomical gamma-ray data. It is implemented as a C++ library that is fully scriptable in the Python scripting language. The library provides core functionalities such as data input and output, interfaces for parameter specifications, and a reporting and logging interface. It implements instruments specific functionalities such as instrument response functions and data formats. Instrument specific functionalities share a common interface to allow for extension of the GammaLib to include new gamma-ray instruments. The GammaLib provides an abstract data analysis framework that enables simultaneous multi-mission analysis.
Glnemo2 is an interactive 3D visualization program developed in C++ using the OpenGL library and Nokia QT 4.X API. It displays in 3D the particles positions of the different components of an nbody snapshot. It quickly gives a lot of information about the data (shape, density area, formation of structures such as spirals, bars, or peanuts). It allows for in/out zooms, rotations, changes of scale, translations, selection of different groups of particles and plots in different blending colors. It can color particles according to their density or temperature, play with the density threshold, trace orbits, display different time steps, take automatic screenshots to make movies, select particles using the mouse, and fly over a simulation using a given camera path. All these features are accessible from a very intuitive graphic user interface.
Glnemo2 supports a wide range of input file formats (Nemo, Gadget 1 and 2, phiGrape, Ramses, list of files, realtime gyrfalcON simulation) which are automatically detected at loading time without user intervention. Glnemo2 uses a plugin mechanism to load the data, so that it is easy to add a new file reader. It's powered by a 3D engine which uses the latest OpenGL technology, such as shaders (glsl), vertex buffer object, frame buffer object, and takes in account the power of the graphic card used in order to accelerate the rendering. With a fast GPU, millions of particles can be rendered in real time. Glnemo2 runs on Linux, Windows (using minGW compiler), and MaxOSX, thanks to the QT4API.
AAOGlimpse is an experimental display program that uses OpenGL to display FITS data (and even JPEG images) as 3D surfaces that can be rotated and viewed from different angles, all in real-time. It is WCS-compliant and designed to handle three-dimensional data. Each plane in a data cube is surfaced in the same way, and the program allows the user to travel through a cube by 'peeling off' successive planes, or to look into a cube by suppressing the display of data below a given cutoff value. It can blink images and can superimpose images and contour maps from different sources using their world coordinate data. A limited socket interface allows communication with other programs.
MOCASSIN is a fully 3D or 2D photoionisation and dust radiative transfer code which employs a Monte Carlo approach to the transfer of radiation through media of arbitrary geometry and density distribution. Written in Fortran, it was originally developed for the modelling of photoionised regions like HII regions and planetary nebulae and has since expanded and been applied to a variety of astrophysical problems, including modelling clumpy dusty supernova envelopes, star forming galaxies, protoplanetary disks and inner shell fluorence emission in the photospheres of stars and disk atmospheres. The code can deal with arbitrary Cartesian grids of variable resolution, it has successfully been used to model complex density fields from SPH calculations and can deal with ionising radiation extending from Lyman edge to the X-ray. The dust and gas microphysics is fully coupled both in the radiation transfer and in the thermal balance.
Pacerman, written in IDL, is a new method to calculate Faraday rotation measure maps from multi-frequency polarisation angle data. In order to solve the so called n-pi-ambiguity problem which arises from the observationally ambiguity of the polarisation angle which is only determined up to additions of n times pi, where n is an integer, we suggest using a global scheme. Instead of solving the n-pi-ambiguity for each data point independently, our algorithm, which we chose to call Pacerman solves the n-pi-ambiguity for a high signal-to-noise region "democratically" and uses this information to assist computations in adjacent low signal-to-noise areas.
Starlink has many applications within it to meet a variety of needs; it includes:
Many problems in astronomy and astrophysics require a computation of the spherical harmonic transforms. This is in particular the case whenever data to be analyzed are distributed over the sphere or a set of corresponding mock data sets has to be generated. In many of those contexts, rapidly improving resolutions of both the data and simulations puts increasingly bigger emphasis on our ability to calculate the transforms quickly and reliably.
The scalable spherical harmonic transform library S2HAT consists of a set of flexible, massively parallel, and scalable routines for calculating diverse (scalar, spin-weighted, etc) spherical harmonic transforms for a class of isolatitude sky grids or pixelizations. The library routines implement the standard algorithm with the complexity of O(n^3/2), where n is a number of pixels/grid points on the sphere, however, owing to their efficient parallelization and advanced numerical implementation, they achieve very competitive performance and near perfect scalability. S2HAT is written in Fortran 90 with a C interface. This software is a derivative of the spherical harmonic transforms included in the HEALPix package and is based on both serial and MPI routines of its version 2.01, however, since version 2.5 this software is fully autonomous of HEALPix and can be compiled and run without the HEALPix library.
The pS2HAT routines allow efficient, parallel calculation of the so-called 'pure' polarized multipoles. The computed multipole coefficients are equal to the standard pseudo-multipoles calculated for the apodized sky maps of the Stokes parameters Q and U subsequently corrected by so-called counterterms. If the applied apodizations fullfill certain boundary conditions, these multipoles correspond to the pure multipoles. Pure multipoles of one type, i.e., either E or B, are ensured not to contain contributions from the other one, at least to within numerical artifacts. They can be therefore further used in the estimation of the sky power spectra via the pseudo power spectrum technique, which has to however correctly account for the applied apodization on the one hand, and the presence of the counterterms, on the other.
In addition, the package contains the routines permitting calculation of the spin-weighted apodizations, given an input scalar, i.e., spin-0 window. The former are needed to compute the counterterms. It also provides routines for maps and window manipulations. The routines are written in C and based on the S2HAT library, which is used to perform all required spherical harmonic transforms as well as all inter-processor communication. They are therefore parallelized using MPI and follow the distributed-memory computational model. The data distribution patterns, pixelization choices, conventions etc are all as those assumed/allowed by the S2HAT library.
atlant is a public numerical code for fast calculations of cosmological recombination of primordial hydrogen-helium plasma is presented. This code is based on the three-level approximation (TLA) model of recombination and allows us to take into account some "fine'' physical effects of cosmological recombination simultaneously with using fudge factors.
REBOUND is a multi-purpose N-body code which is freely available under an open-source license. It was designed for collisional dynamics such as planetary rings but can also solve the classical N-body problem. It is highly modular and can be customized easily to work on a wide variety of different problems in astrophysics and beyond.
REBOUND comes with symplectic integrators WHFast, WHFastHelio, SEI, and LEAPFROG. It supports open, periodic and shearing-sheet boundary conditions. REBOUND can use a Barnes-Hut tree to calculate both self-gravity and collisions. These modules are fully parallelized with MPI as well as OpenMP. The former makes use of a static domain decomposition and a distributed essential tree. Two new collision detection modules based on a plane-sweep algorithm are also implemented. The performance of the plane-sweep algorithm is superior to a tree code for simulations in which one dimension is much longer than the other two and in simulations which are quasi-two dimensional with less than one million particles.
POWMES is a F90 program to measure very accurately the power spectrum in a N-body simulation, using Taylor expansion of some order on the cosine and sine transforms. It can read GADGET format and requires FFTW2 to be installed.
MADmap produces maximum-likelihood images of the sky from time-ordered data which include correlated noise, such as those gathered by Cosmic Microwave Background (CMB) experiments. It works efficiently on platforms ranging from small workstations to the most massively parallel supercomputers. Map-making is a critical step in the analysis of all CMB data sets, and the maximum-likelihood approach is the most accurate and widely applicable algorithm; however, it is a computationally challenging task. This challenge will only increase with the next generation of ground-based, balloon-borne and satellite CMB polarization experiments. The faintness of the B-mode signal that these experiments seek to measure requires them to gather enormous data sets. MADmap has the ability to address problems typically encountered in the analysis of realistic CMB data sets. The massively parallel and distributed implementation is detailed and scaling complexities are given for the resources required. MADmap is capable of analyzing the largest data sets now being collected on computing resources currently available.
CosmoNest is an algorithm for cosmological model selection. Given a model, defined by a set of parameters to be varied and their prior ranges, and data, the algorithm computes the evidence (the marginalized likelihood of the model in light of the data). The Bayes factor, which is proportional to the relative evidence of two models, can then be used for model comparison, i.e. to decide whether a model is an adequate description of data, or whether the data require a more complex model.
For convenience, CosmoNest, programmed in Fortran, is presented here as an optional add-on to CosmoMC (ascl:1106.025), which is widely used by the cosmological community to perform parameter fitting within a model using a Markov-Chain Monte-Carlo (MCMC) engine. For this reason it can be run very easily by anyone who is able to compile and run CosmoMC. CosmoNest implements a different sampling strategy, geared for computing the evidence very accurately and efficiently. It also provides posteriors for parameter fitting as a by-product.
This code is an extension of CMBFAST4.5.1 to compute the ISW-correlation power spectrum and the 2-point angular ISW-correlation function for a given galaxy window function. It includes dark energy models specified by a constant equation of state (w) or a linear parameterization in the scale factor (w0,wa) and a constant sound speed (c2de). The ISW computation is limited to flat geometry. Differently from the original CMBFAST4.5 version dark energy perturbations are implemented for a general dark energy fluid specified by w(z) and c2de in synchronous gauge. For time varying dark energy models it is suggested not to cross the w=-1 line, as Dr. Wenkman says: "never cross the streams", bad things can happen.
Univiewer is a visualisation program for HEALPix maps. It is written in C++ and uses OpenGL and the wxWidgets library for cross-platform portability. Using it you can:
- Rotate and zoom maps on the sphere in 3D
- Create high-resolution views of square patches of the map
- Change maximum and minimum values of the colourmap interactively
- Calculate the power spectrum of the full-sky map or a patch
- Display any column of a HEALPix map FITS file on the sphere
Since Univiewer uses OpenGL for 3D graphics, its performance is dependent your video card. It has been tested successfully on computers with as little as 8Mb video memory, but it is recommended to have at least 32Mb to get good performance.
In the 3D view, a HEALPix map is projected onto a ECP pixelation to create a texture which is wrapped around the sphere. In calculating the power spectrum, the spherical harmonic transforms are computed using the same ECP pixelation. This inevitably leads to some discrepancies at small scales due to repixelation effects, but they are reasonably small.
This is an implementation of a fairly simple-minded luminosity distance fitter, intended for use with supernova data. The calculational technique is based on evaluating the $chi^2$ of the model fit on a grid and marginalization over various nuisance parameters. Of course, the nature of these things is that this code has gotten steadily more complex, so perhaps the simple moniker is no longer justified.
SiFTO is an empirical method for modeling Type Ia supernova (SN Ia) light curves by manipulating a spectral template. We make use of high-redshift SN data when training the model, allowing us to extend it bluer than rest-frame U. This increases the utility of our high-redshift SN observations by allowing us to use more of the available data. We find that when the shape of the light curve is described using a stretch prescription, applying the same stretch at all wavelengths is not an adequate description. SiFTO therefore uses a generalization of stretch which applies different stretch factors as a function of both the wavelength of the observed filter and the stretch in the rest-frame B band. SiFTO has been compared to other published light-curve models by applying them to the same set of SN photometry, and it's been demonstrated that SiFTO and SALT2 perform better than the alternatives when judged by the scatter around the best-fit luminosity distance relationship. When SiFTO and SALT2 are trained on the same data set the cosmological results agree.
This module is a plug-in for CosmoMC and requires that software. Though programmed to analyze SNLS3 SN data, it can also be used for other SN data provided the inputs are put in the right form. In fact, this is probably a good idea, since the default treatment that comes with CosmoMC is flawed. Note that this requires fitting two additional SN nuisance parameters (alpha and beta), but this is significantly faster than attempting to marginalize over them internally.
MIS is a pipeline toolkit using the package MIRIAD to combine Interferometric and Single Dish data. This was prompted by our observations made with the Combined Array For Research in Millimeter-wave Astronomy (CARMA) interferometer of the star-forming region NGC 1333, a large survey highlighting the new 23-element and singledish observing modes. The project consists of 20 CARMA datasets each containing interferometric as well as simultaneously obtained single dish data, for 3 molecular spectral lines and continuum, in 527 different pointings, covering an area of about 8 by 11 arcminutes. A small group of collaborators then shared this toolkit and their parameters via CVS, and scripts were developed to ensure uniform data reduction across the group. The pipeline was run end-to-end each night that new observations were obtained, producing maps that contained all the data to date. This approach could serve as a model for repeated calibration and mapping of large mixed-mode correlation datasets from ALMA.
The Herschel Space Observatory is the fourth cornerstone mission in the ESA science programme and performs photometry and spectroscopy in the 55 - 672 micron range. The development of the Herschel Data Processing System started in 2002 to support the data analysis for Instrument Level Tests. The Herschel Data Processing System was used for the pre-flight characterisation of the instruments, and during various ground segment test campaigns. Following the successful launch of Herschel 14th of May 2009 the Herschel Data Processing System demonstrated its maturity when the first PACS preview observation of M51 was processed within 30 minutes of reception of the first science data after launch. Also the first HIFI observations on DR21 were successfully reduced to high quality spectra, followed by SPIRE observations on M66 and M74. A fast turn-around cycle between data retrieval and the production of science-ready products was demonstrated during the Herschel Science Demonstration Phase Initial Results Workshop held 7 months after launch, which is a clear proof that the system has reached a good level of maturity.
The development of parallel-processing image-analysis codes is generally a challenging task that requires complicated choreography of interprocessor communications. If, however, the image-analysis algorithm is embarrassingly parallel, then the development of a parallel-processing implementation of that algorithm can be a much easier task to accomplish because, by definition, there is little need for communication between the compute processes. I describe the design, implementation, and performance of a parallel-processing image-analysis application, called CRBLASTER, which does cosmic-ray rejection of CCD (charge-coupled device) images using the embarrassingly-parallel L.A.COSMIC algorithm. CRBLASTER is written in C using the high-performance computing industry standard Message Passing Interface (MPI) library. The code has been designed to be used by research scientists who are familiar with C as a parallel-processing computational framework that enables the easy development of parallel-processing image-analysis programs based on embarrassingly-parallel algorithms. The CRBLASTER source code is freely available at the official application website at the National Optical Astronomy Observatory. Removing cosmic rays from a single 800x800 pixel Hubble Space Telescope WFPC2 image takes 44 seconds with the IRAF script lacos_im.cl running on a single core of an Apple Mac Pro computer with two 2.8-GHz quad-core Intel Xeon processors. CRBLASTER is 7.4 times faster processing the same image on a single core on the same machine. Processing the same image with CRBLASTER simultaneously on all 8 cores of the same machine takes 0.875 seconds -- which is a speedup factor of 50.3 times faster than the IRAF script. A detailed analysis is presented of the performance of CRBLASTER using between 1 and 57 processors on a low-power Tilera 700-MHz 64-core TILE64 processor.
Saada transforms a set of heterogeneous FITS files or VOtables of various categories (images, tables, spectra, etc.) in a powerful database deployed on the Web. Databases are located on your host and stay independent of any external server. This job doesn’t require writing code. Saada can mix data of various categories in multiple collections. Data collections can be linked each to others making relevant browsing paths and allowing data-mining oriented queries. Saada supports 4 VO services (Spectra, images, sources and TAP) . Data collections can be published immediately after the deployment of the Web interface.
The CIGALE code has been developed to study the evolution of galaxies by comparing modelled galaxy spectral energy distributions (SEDs) to observed ones from the far ultraviolet to the far infrared. It extends the SED fitting algorithm written by Burgarella et al. (2005, MNRAS 360, 1411). While the previous code was designed to fit SEDs in the optical and near infrared, CIGALE is able to fit SEDs up to the far infrared using Dale & Helou (2002, ApJ 576, 159). CIGALE Bayesian and CIGALE Monte Carlo Markov Chain are available.
Studies of astrophysical non-LTE media require the combination of atomic and molecular spectroscopic and collisional data often described differently in various databases. SPECTCOL is a tool that implements VAMDC standards, retrieve relevant information from different databases such as CDMS, HITRAN, BASECOL, and can upload local files. All transfer of data between the client and the databases use the VAMDC-XSAMS schema. The spectroscopic and collisional information is combined and useful outputs (ascii or xsams) are provided for the study of the interstellar medium.
MOPEX (MOsaicker and Point source EXtractor) is a package for reducing and analyzing imaging data, as well as MIPS SED data. MOPEX includes the point source extraction package, APEX.
MOPEX is designed to allow the user to:
CUBISM, written in IDL, constructs spectral cubes, maps, and arbitrary aperture 1D spectral extractions from sets of mapping mode spectra taken with Spitzer's IRS spectrograph. CUBISM is optimized for non-sparse maps of extended objects, e.g. the nearby galaxy sample of SINGS, but can be used with data from any spectral mapping AOR (primarily validated for maps which are designed as suggested by the mapping HOWTO).
SITools2 is a CNES generic tool performed by a joint effort between CNES and scientific laboratories. SITools provides a self-manageable data access layer deployed on already existing scientific laboratory databases. This new version of SITools is a JAVA-based framework, under open source license, that provides a portable archive system, highly configurable, easy to use by laboratories, with a plugin mechanism so developers can add their own applications.
MESS is a Monte Carlo simulation IDL code which uses either the results of the statistical analysis of the properties of discovered planets, or the results of the planet formation theories, to build synthetic planet populations fully described in terms of frequency, orbital elements and physical properties. They can then be used to either test the consistency of their properties with the observed population of planets given different detection techniques or to actually predict the expected number of planets for future surveys. It can be used to probe the physical and orbital properties of a putative companion within the circumstellar disk of a given star and to test constrain the orbital distribution properties of a potential planet population around the members of the TW Hydrae association. Finally, using in its predictive mode, the synergy of future space and ground-based telescopes instrumentation has been investigated to identify the mass-period parameter space that will be probed in future surveys for giant and rocky planets. A Python version of this code, Exo-DMC (ascl:2010.008), is available.
Database management is an increasingly important part of astronomical data analysis. Astronomers need easy and convenient ways of storing, editing, filtering, and retrieving data about data. Commercial databases do not provide good solutions for many of the everyday and informal types of database access astronomers need. The Starbase database system with simple data file formatting rules and command line data operators has been created to answer this need. The system includes a complete set of relational and set operators, fast search/index and sorting operators, and many formatting and I/O operators. Special features are included to enhance the usefulness of the database when manipulating astronomical data. The software runs under UNIX, MSDOS and IRAF.
High precision cosmology requires analysis of large scale surveys in 3D spherical coordinates, i.e. Fourier-Bessel decomposition. Current methods are insufficient for future data-sets from wide-field cosmology surveys. 3DEX (3D EXpansions) is a public code for fast Fourier-Bessel decomposition of 3D all-sky surveys which takes advantage of HEALPix for the calculation of tangential modes. For surveys with millions of galaxies, computation time is reduced by a factor 4-12 depending on the desired scales and accuracy. The formulation is also suitable for pre-calculations and external storage of the spherical harmonics, which allows for further speed improvements. The 3DEX code can accommodate data with masked regions of missing data. It can be applied not only to cosmological data, but also to 3D data in spherical coordinates in other scientific fields.
VAPOR is the Visualization and Analysis Platform for Ocean, Atmosphere, and Solar Researchers. VAPOR provides an interactive 3D visualization environment that runs on most UNIX and Windows systems equipped with modern 3D graphics cards. VAPOR provides:
- A visual data discovery environment tailored towards the specialized needs of the astro and geosciences CFD community
- A desktop solution capable of handling terascale size data sets
- Advanced interactive 3D visualization tightly coupled with quantitative data analysis
- Support for multi-variate, time-varying data
- Close coupling with RSI's powerful interpretive data language, IDL
- Support for 3D visualization of WRF-ARW datasets
The FIBRE-pac (FMOS image-based reduction package) is an IRAF-based reduction tool for the fiber multiple-object spectrograph (FMOS) of the Subaru telescope. To reduce FMOS images, a number of special techniques are necessary because each image contains about 200 separate spectra with airglow emission lines variable in spatial and time domains, and with complicated throughput patterns for the airglow masks. In spite of these features, almost all of the reduction processes except for a few steps are carried out automatically by scripts in text format making it easy to check the commands step by step. Wavelength- and flux-calibrated images together with their noise maps are obtained using this reduction package.
FITSH provides a standalone environment for analysis of data acquired by imaging astronomical detectors. The package provides utilities both for the full pipeline of subsequent related data processing steps (including image calibration, astrometry, source identification, photometry, differential analysis, low-level arithmetic operations, multiple image combinations, spatial transformations and interpolations, etc.) and for aiding the interpretation of the (mainly photometric and/or astrometric) results. The package also features a consistent implementation of photometry based on image subtraction, point spread function fitting and aperture photometry and provides easy-to-use interfaces for comparisons and for picking the most suitable method for a particular problem. The utilities in the package are built on the top of the commonly used UNIX/POSIX shells (hence the name of the package), therefore both frequently used and well-documented tools for such environments can be exploited and managing massive amount of data is rather convenient.
The development of TIPSY was motivated by the need to quickly display and analyze the results of N-body simulations. Most data visualization packages are designed for the display of gridded data, and hence are unsuitable for use with particle data. Therefore, a special package was built that could easily perform the following functions:
1.) Display particle positions (as points), and velocities (as line segments) from an arbitrary viewpoint;
2.) Zoom in to a chosen position. Due to their extremely clustered nature, structure of interest in an N-body simulation is often so small that it cannot be seen when looking at the simulation as a whole;
3.) Color particles to display scalar fields. Examples of such fields are potential energy, or for SPH particles, density and temperature;
4.) Selection of a subset of the particles for display and analysis. Regions of interest are generally small subsets of the simulation;
5.) Following selected particles from one timestep to another; and,
6.) Finding cumulative properties of a collection of particles. This usually involves just a sum over the particles.
The basic data structure is an array of particle structures. Since TIPSY was built for use with cosmological N-body simulations, there are actually three separate arrays for each of the types of particle used in such simulations: collisionless particles, SPH particles, and star particles. A single timestep is read into these arrays from a disk file. Display is done by finding the x and y coordinates of the particles in the rotated coordinate system, and storing them in arrays. Screen coordinates are calculated from these arrays according to the current zoom factor. Also, a software Z-buffer is maintained to save time if many particles project to the same screen pixel. There are several types of display. An "all plot" displays all particles colored according to their type. A "radial plot" will color particles according to the projection of the velocity along the line-of-sight. A "gas plot" will color gas according to SPH quantities such as density, temperature, neutral hydrogen fraction, etc. Subsets of particles are maintained using boxes." A box structure contains a bounding box, and an array of pointers to particles within the box. All display and analysis functions are performed on the "active box." By default all particles are loaded into box 0, which becomes the active box. If a new timestep is read from disk, all boxes are destroyed. A selection of particles can be followed between timesteps via a "mark" array. Marked particles are displayed in a different color, and the analysis functions can be told to only operate on the marked particles.
Written in ANSI C, eclipse is a library offering numerous services related to astronomical image processing: FITS data access, various image and cube loading methods, binary image handling and filtering (including convolution and morphological filters), 2-D cross-correlation, connected components, cube and image arithmetic, dead pixel detection and correction, object detection, data extraction, flat-fielding with robust fit, image generation, statistics, photometry, image-space resampling, image combination, and cube stacking. It also contains support for mathematical tools like random number generation, FFT, curve fitting, matrices, fast median computation, and point-pattern matching. The main feature of this library is its ability to handle large amounts of input data (up to 2GB in the current version) regardless of the amount of memory and swap available on the local machine. Another feature is the very high speed allowed by optimized C, making it an ideal base tool for programming efficient number-crunching applications, e.g., on parallel (Beowulf) systems.
Funtools is a "minimal buy-in" FITS library and utility package developed at the the High Energy Astrophysics Division of SAO. The Funtools library provides simplified access to a wide array of file types: standard astronomical FITS images and binary tables, raw arrays and binary event lists, and even tables of ASCII column data. A sophisticated region filtering library (compatible with ds9) filters images and tables using boolean operations between geometric shapes, support world coordinates, etc. Funtools also supports advanced capabilities such as optimized data searching using index files.
Because Funtools consists of a library and a set of user programs, it is most appropriately built from source. Funtools has been ported to Solaris, Linux, LinuxPPC, SGI, Alpha OSF1, Mac OSX (darwin) and Windows 98/NT/2000/XP. Once the source code tar file is retrieved, Funtools can be built and installed easily using standard commands.
THERMINATOR is a Monte Carlo event generator dedicated to studies of the statistical production of particles in relativistic heavy-ion collisions. The increased functionality of the code contains the following features: The input of any shape of the freeze-out hypersurface and the expansion velocity field, including the 3+1 dimensional profiles, in particular those generated externally with various hydrodynamic codes. The hypersufraces may have variable thermal parameters, which allows for studies departing significantly from the mid-rapidity region, where the baryon chemical potential becomes large. We include a library of standard sets of hypersurfaces and velocity profiles describing the RHIC Au+Au data at sqrt(s_(NN)) = 200 GeV for various centralities, as well as those anticipated for the LHC Pb+Pb collisions at sqrt(s_(NN)) = 5.5 TeV. A separate code, FEMTO-THERMINATOR, is provided to carry out the analysis of femtoscopic correlations which are an important source of information concerning the size and expansion of the system. We also include several useful scripts that carry out auxiliary tasks, such as obtaining an estimate of the number of elastic collisions after the freeze-out, counting of particles flowing back into the fireball and violating causality (typically very few), or visualizing various results: the particle p_T-spectra, the elliptic flow coefficients, and the HBT correlation radii. We also investigate the problem of the back-flow of particles into the hydrodynamic region, as well as estimate the elastic rescattering in terms of trajectory crossings. The package is written in C++ and uses the CERN ROOT environment.
PHOX is a novel, virtual X-ray observatory designed to obtain synthetic observations from hydro-numerical simulations. The code is a photon simulator and can be apply to simulate galaxy clusters. In fact, X-ray observations of clusters of galaxies continue to provide us with an increasingly detailed picture of their structure and of the underlying physical phenomena governing the gaseous component, which dominates their baryonic content. Therefore, it is fundamental to find the most direct and faithful way to compare such observational data with hydrodynamical simulations of cluster-like objects, which can currently include various complex physical processes. Here, we present and analyse synthetic Suzaku observations of two cluster-size haloes obtained by processing with PHOX the hydrodynamical simulation of the large-scale, filament-like region in which they reside. Taking advantage of the simulated data, we test the results inferred from the X-ray analysis of the mock observations against the underlying, known solution. Remarkably, we are able to recover the theoretical temperature distribution of the two haloes by means of the multi-temperature fitting of the synthetic spectra. Moreover, the shapes of the reconstructed distributions allow us to trace the different thermal structure that distinguishes the dynamical state of the two haloes.
Observations of disk galaxies at z~2 have demonstrated that turbulence driven by gravitational instability can dominate the energetics of the disk. GIDGET is a 1D simulation code, which we have made publicly available, that economically evolves these galaxies from z~2 to z~0 on a single CPU in a matter of minutes, tracking column density, metallicity, and velocity dispersions of gaseous and multiple stellar components. We include an H$_2$ regulated star formation law and the effects of stellar heating by transient spiral structure. We use this code to demonstrate a possible explanation for the existence of a thin and thick disk stellar population and the age-velocity dispersion correlation of stars in the solar neighborhood: the high velocity dispersion of gas in disks at z~2 decreases along with the cosmological accretion rate, while at lower redshift, the dynamically colder gas forms the low velocity dispersion stars of the thin disk.
PhAst (Photometry-Astrometry) is an IDL astronomical image viewer based on the existing application ATV which displays and analyzes FITS images. It can calibrate raw images, provide astrometric solutions, and do circular aperture photometry. PhAst allows the user to load, process, and blink any number of images. Analysis packages include image calibration, photometry, and astrometry (provided through an interface with SExtractor, SCAMP, and missFITS). PhAst has been designed to generate reports for Minor Planet Center reporting.
FLAGging and CALlibration (FLAGCAL) is a software pipeline developed for automatic flagging and calibration of the GMRT data. This pipeline can be used for preprocessing (before importing the data in AIPS) any other interferromteric data also (given that the data file is in FITS format and contains multiple channels & scans).There are also a few GUI based tools which can be used for quick visualization of the data.
GGobi is an open source visualization program for exploring high-dimensional data. It provides highly dynamic and interactive graphics such as tours, as well as familiar graphics such as the scatterplot, barchart and parallel coordinates plots. Plots are interactive and linked with brushing and identification.
LISACode is a simulator of the LISA mission. Its ambition is to achieve a new degree of sophistication allowing to map, as closely as possible, the impact of the different subsystems on the measurements. Its also a useful tool for generating realistic data including several kind of sources (Massive Black Hole binaries, EMRIs, cosmic string cusp, stochastic background, etc) and for preparing their analysis. It’s fully integrated to the Mock LISA Data Challenge. LISACode is not a detailed simulator at the engineering level but rather a tool whose purpose is to bridge the gap between the basic principles of LISA and a future, sophisticated end-to-end simulator.
Future cosmological surveys will provide 3D large scale structure maps with large sky coverage, for which a 3D Spherical Fourier-Bessel (SFB) analysis is natural. Wavelets are particularly well-suited to the analysis and denoising of cosmological data, but a spherical 3D isotropic wavelet transform does not currently exist to analyse spherical 3D data. We present a new fast Discrete Spherical Fourier-Bessel Transform (DSFBT) based on both a discrete Bessel Transform and the HEALPIX angular pixelisation scheme. We tested the 3D wavelet transform and as a toy-application, applied a denoising algorithm in wavelet space to the Virgo large box cosmological simulations and found we can successfully remove noise without much loss to the large scale structure. The new spherical 3D isotropic wavelet transform, called MRS3D, is ideally suited to analysing and denoising future 3D spherical cosmological surveys; it uses a novel discrete spherical Fourier-Bessel Transform. MRS3D is based on two packages, IDL and Healpix and can be used only if these two packages have been installed.
CMBview is a viewer for FITS files containing HEALPix sky maps. Sky maps are projected onto a 3d sphere which can be rotated and zoomed interactively with the mouse. Features include:
CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.
XEphem is a scientific-grade interactive astronomical ephemeris package for UNIX-like systems. Written in C, X11 and Motif, it is easily ported to systems. XEphem computes heliocentric, geocentric and topocentric information for all objects and has built-in support for all planets, the moons of Mars, Jupiter, Saturn, Uranus and Earth, central meridian longitude of Mars and Jupiter, Saturn's rings, and Jupiter's Great Red Spot. It allows user-defined objects including stars, deepsky objects, asteroids, comets and Earth satellites, provides special efficient handling of large catalogs including Tycho, Hipparcos, GSC, displays data in configurable tabular formats in conjunction with several interactive graphical views, and displays a night-at-a-glance 24 hour graphic showing when any selected objects are up. It also displays 3-D stereo Solar System views that are particularly well suited for visualizing comet trajectories, quickly finds all close pairs of objects in the sky, and sorts and prints all catalogs with very flexible criteria for creating custom observing lists.
PyEphem provides scientific-grade astronomical computations for the Python programming language. Given a date and location on the Earth’s surface, it can compute the positions of the Sun and Moon, of the planets and their moons, and of any asteroids, comets, or earth satellites whose orbital elements the user can provide. Additional functions are provided to compute the angular separation between two objects in the sky, to determine the constellation in which an object lies, and to find the times at which an object rises, transits, and sets on a particular day.
The numerical routines that lie behind PyEphem are those from the XEphem astronomy application (ascl:1112.013), whose author, Elwood Downey, generously gave permission for us to use them as the basis for PyEphem.
The NASA Astrophysics Data System (ADS) now holds 1.3 million scanned pages, containing numerous plots and figures for which the original data sets are lost or inaccessible. The availability of scans of the figures can significantly ease the regeneration of the data sets. For this purpose, the ADS has developed Dexter, a Java applet that supports the user in this process. Dexter's basic functionality is to let the user manually digitize a plot by marking points and defining the coordinate transformation from the logical to the physical coordinate system. Advanced features include automatic identification of axes, tracing lines and finding points matching a template.
PREDICT is an open-source, multi-user satellite tracking and orbital prediction program written under the Linux operating system. PREDICT provides real-time satellite tracking and orbital prediction information to users and client applications through:
ASpec is a spectrum and line analysis package developed at STScI. ASpec is designed as an add-on package for IRAF and incorporates a variety of analysis techniques for astronomical spectra. ASpec operates on spectra from a wide variety of ground-based and space-based instruments and allows simultaneous handling of spectra from different wavelength regimes. The package accommodates non-linear dispersion relations and provides a variety of functions, individually or in combination, with which to fit spectral features and the continuum. It also permits the masking of known bad data. ASpec provides a powerful, intuitive graphical user interface implemented using the IRAF Object Manager and customized to handle: data input/output (I/O); on-line help; selection of relevant features for analysis; plotting and graphical interaction; and data base management.
SwiftVis is a tool originally developed as part of a rewrite of Swift (ascl:1303.001) to be used for analysis and plotting of simulations performed with Swift and Swifter. The extensibility built into the design has allowed us to make SwiftVis a general purpose analysis and plotting package customized to be usable by the planetary science community at large. SwiftVis is written in Java and has been tested on Windows, Linux, and Mac platforms. Its graphical interface allows users to do complex analysis and plotting without having to write custom code.
Aladin is an interactive software sky atlas allowing the user to visualize digitized astronomical images, superimpose entries from astronomical catalogues or databases, and interactively access related data and information from the Simbad database, the VizieR service and other archives for all known sources in the field.
Created in 1999, Aladin has become a widely-used VO tool capable of addressing challenges such as locating data of interest, accessing and exploring distributed datasets, visualizing multi-wavelength data. Compliance with existing or emerging VO standards, interconnection with other visualisation or analysis tools, ability to easily compare heterogeneous data are key topics allowing Aladin to be a powerful data exploration and integration tool as well as a science enabler.
McScatter illustrates a method of combining stellar dynamics with stellar evolution. The method is intended for elaborate applications, especially the dynamical evolution of rich star clusters. The dynamics is based on binary scattering in a multi-mass field of stars with uniform density and velocity dispersion, using the scattering cross section of Giersz (MNRAS, 2001, 324, 218-30).
Roche is a visualization and analysis tool for drawing the Roche-lobe geometry of evolving binaries. Roche can be used as a standalone program reading data from the command line or from a file generated by SeBa (ascl:1201.003). Eventually Roche will be able to read data from any other binary evolution program. Roche requires Starlab (ascl:1010.076) version 4.1.1 or later and the pgplot (ascl:1103.002) libraries. Roche creates a series of images, based on the SeBa output file SeBa.data, displaying the evolutionary state of a binary.
SeBa is the stellar and binary evolution module, fully integrated into the kira N-body integrator, for Starlab (ascl:1010.076), although it can also be used as a stand-alone module for non-dynamical applications. Due to the interaction between stellar evolution and stellar dynamics, it is difficult to solve for the evolution of both systems in a completely self-consistent way. The trajectories of stars are computed using a block timestep scheme, as described earlier. Stellar and binary evolution is updated at fixed intervals (every 1/64 of a crossing time, typically a few thousand years). Any feedback between the two systems may thus experience a delay of at most one timestep. Internal evolution time steps may differ for each star and binary, and depend on binary period, perturbations due to neighbors, and the evolutionary state of the star. Time steps in this treatment vary from several milliseconds up to (at most) a million years.
The determination of the EM gain of the CCD is best done by fitting the histogram of many low-light frames. Typically, the dark+CIC noise of a 30ms frame itself is a sufficient amount of signal to determine accurately the EM gain with about 200 512x512 frames. The IDL code emGain takes as an input a cube of frames and fit the histogram of all the pixels with the EM stage output probability function. The function returns the EM gain of the frames as well as the read-out noise and the mean signal level of the frames.
Setting initial conditions in numerical simulations using the standard procedure based on the Zel'dovich approximation (ZA) generates incorrect second and higher-order growth and therefore excites long-lived transients in the evolution of the statistical properties of density and velocity fields. Using more accurate initial conditions based on second-order Lagrangian perturbation theory (2LPT) reduces transients significantly; initial conditions based on 2LPT are thus much more appropriate for numerical simulations devoted to precision cosmology. The 2LPTIC code provides initial conditions for running cosmological simulations based on second-order Lagrangian Perturbation Theory (2LPT), rather than first-order (Zel'dovich approximation).
VIM (Virtual Observatory Integration and Mining) is a data retrieval and exploration application that assumes an astronomer has a list of 'sources' (positions in the sky), and wants to explore archival catalogs, images, and spectra of the sources, in order to identify, select, and mine the list. VIM does this either through web forms, building a custom 'data matrix,' or locally through downloadable Python code. Any VO-registered catalog service can be used by VIM, as well as co-registered image cutouts from VO-image services, and spectra from VO-spectrum services. The user could, for example, show together: proper motions from GSC2, name and spectral type from NED, magnitudes and colors from 2MASS, and cutouts and spectra from SDSS. VIM can compute columns across surveys and sort on these (eg. 2MASS J magnitude minus SDSS g). For larger sets of sources, VIM utilizes the asynchronous Nesssi services from NVO, that can run thousands of cone and image services overnight.
The Fisher4Cast suite, which requires MatLab, provides a standard, tested tool set for general Fisher Information matrix prediction and forecasting for use in both research and education. The toolbox design is robust and modular, allowing for easy additions and adaptation while keeping the user interface intuitive and easy to use. Fisher4Cast is completely general but the default is coded for cosmology. It provides parameter error forecasts for cosmological surveys providing distance, Hubble expansion and growth measurements in a general, curved FLRW background.
Mercury is a new general-purpose software package for carrying out orbital integrations for problems in solar-system dynamics. Suitable applications include studying the long-term stability of the planetary system, investigating the orbital evolution of comets, asteroids or meteoroids, and simulating planetary accretion. Mercury is designed to be versatile and easy to use, accepting initial conditions in either Cartesian coordinates or Keplerian elements in "cometary" or "asteroidal" format, with different epochs of osculation for different objects. Output from an integration consists of osculating elements, written in a machine-independent compressed format, which allows the results of a calculation performed on one platform to be transferred (e.g. via FTP) and decoded on another.
During an integration, Mercury monitors and records details of close encounters, sungrazing events, ejections and collisions between objects. The effects of non-gravitational forces on comets can also be modeled. The package supports integrations using a mixed-variable symplectic routine, the Bulirsch-Stoer method, and a hybrid code for planetary accretion calculations.
ExoFit is a freely available software package for estimating orbital parameters of extra-solar planets. ExoFit can search for either one or two planets and employs a Bayesian Markov Chain Monte Carlo (MCMC) method to fit a Keplerian radial velocity curve onto the radial velocity data.
HNBody is a new set of software utilities geared to the integration of hierarchical (nearly-Keplerian) N-body systems. Our focus is on symplectic methods, and we have included explicit support for three classes of particles (heavy, light, and massless), second and fourth order methods, post-Newtonian corrections, and the use of a symplectic corrector (among other things). For testing purposes, we also provide support for more general integration schemes (Bulirsch-Stoer & Runge-Kutta). Configuration files employing an intuitive syntax allow for easy problem setup, and many simple simulations can be done without the user compiling any code. Low-level interfaces are also available, enabling extensive customization.
Duchamp is software designed to find and describe sources in 3-dimensional, spectral-line data cubes. Duchamp has been developed with HI (neutral hydrogen) observations in mind, but is widely applicable to many types of astronomical images. It features efficient source detection and handling methods, noise suppression via smoothing or multi-resolution wavelet reconstruction, and a range of graphical and text-based outputs to allow the user to understand the detections.
CLUMPY is a public code for semi-analytical calculation of the gamma-ray flux astrophysical J-factor from dark matter annihilation/decay in the Galaxy, including dark matter substructures. The core of the code is the calculation of the line of sight integral of the dark matter density squared (for annihilations) or density (for decaying dark matter). The code can be used in three modes: i) to draw skymaps from the Galactic smooth component and/or the substructure contributions, ii) to calculate the flux from a specific halo (that is not the Galactic halo, e.g. dwarf spheroidal galaxies) or iii) to perform simple statistical operations from a list of allowed DM profiles for a given object. Extragalactic contributions and other tracers of DM annihilation (e.g. positrons, antiprotons) will be included in a second release.
The SPS software simulates the operation of the Spectral and Photometric Imaging Receiver on-board the ESA’s Herschel Space Observatory. It is coded using the Interactive Data Language (IDL), and produces simulated data at the level-0 stage (non-calibrated data in digitised units). The primary uses for the simulator are to:
The Hammurabi code is a publicly available C++ code for generating mock polarized observations of Galactic synchrotron emission with telescopes such as LOFAR, SKA, Planck, and WMAP, based on model inputs for the Galactic magnetic field (GMF), the cosmic-ray density distribution, and the thermal electron density. The Hammurabi code allows one to perform simulations of several different data sets simultaneously, providing a more reliable constraint of the magnetized ISM.
FFTW is a C subroutine library for computing the discrete Fourier transform (DFT) in one or more dimensions, of arbitrary input size, and of both real and complex data (as well as of even/odd data, i.e. the discrete cosine/sine transforms or DCT/DST).
Benchmarks performed on a variety of platforms show that FFTW's performance is typically superior to that of other publicly available FFT software, and is even competitive with vendor-tuned codes. In contrast to vendor-tuned codes, however, FFTW's performance is portable: the same program will perform well on most architectures without modification.
The FFTW library is required by other codes such as StarCrash (ascl:1010.074) and Hammurabi (ascl:1201.014).
LumFunc is a numerical code to model the Luminosity Function based on central galaxy luminosity-halo mass and total galaxy luminosity-halo mass relations. The code can handle rest b_J-band (2dFGRS), r'-band (SDSS), and K-band luminosities, and any redshift with redshift dependences specified by the user. It separates the luminosity function (LF) to conditional luminosity functions, LF as a function of halo mass, and also to galaxy types. By specifying a narrow mass range, the code will return the conditional luminosity functions. The code returns luminosity functions for galaxy types as well (broadly divided to early-type and late-type). The code also models the cluster luminosity function, either mass averaged or for individual clusters.
Inflation is a numerical code to generate power spectra and other observables through numerical solutions to flow equations. The code generates tensor and scalar power spectra as a function of wavenumber and various other parameters at specific wavenumbers of interest (such as for CMB, scalar perturbations at smaller scales, gravitational wave detection at direct detection frequencies). The output can be easily ported to publicly available Markov Chain codes to constrain cosmological parameters with data.
CISM_DX is a community-developed suite of integrated data, models, and data and model explorers, for research and education. The data and model explorers are based on code written for OpenDX and Octave; OpenDX provides the visualization infrastructures as well as the process for creating user interfaces to the model and data, and Octave allows for extensive data manipulation and reduction operations. The CISM-DX package extends the capabilities of the core software programs to meet the needs of space physics researchers.
ZODIPIC synthesizes images of exozodiacal clouds. As a default, ZODIPIC creates an image of the solar zodiacal cloud as seen from 10 pc, but it contains many parameters that are tweakable from the command line, making it a handy general-purpose model for optically-thin debris disks that yields both accurate images and photometric information simultaneously. Written in IDL, ZODIPIC includes dust with real optical constants, user-specified dust maps and can compute images as seen through a linear polarizer.
NOVAS is an integrated package of subroutines and functions for computing various commonly needed quantities in positional astronomy. The package can provide, in one or two subroutine or function calls, the instantaneous coordinates of any star or planet in a variety of coordinate systems. At a lower level, NOVAS also supplies astrometric utility transformations, such as those for precession, nutation, aberration, parallax, and the gravitational deflection of light. The computations are accurate to better than one milliarcsecond. The NOVAS package is an easy-to-use facility that can be incorporated into data reduction programs, telescope control systems, and simulations. The U.S. parts of The Astronomical Almanac are prepared using NOVAS. Three editions of NOVAS are available: Fortran, C, and Python.
TALYS simulates nuclear reactions which involve neutrons, gamma-rays, protons, deuterons, tritons, helions and alpha-particles, in the 1 keV-200MeV energy range. A suite of nuclear reaction models has been implemented into a single code system, enabling one to evaluate basically all nuclear reactions beyond the resonance range. In particular, TALYS estimates the Maxwellian-averaged reaction rates that are of astrophysical relevance. This enables reaction rates to be calculated with increased accuracy and reliability and the approximations of previous codes to be investigated. The TALYS predictions for the thermonuclear rates of relevance to astrophysics are detailed and compared with those derived by widely-used codes for the same nuclear ingredients. TALYS predictions may differ significantly from those of previous codes, in particular for nuclei for which no or little nuclear data is available. The pre-equilibrium process is shown to influence the astrophysics rates of exotic neutron-rich nuclei significantly. The TALYS code provides a tool to estimate all nuclear reaction rates of relevance to astrophysics with improved accuracy and reliability.
Mangle deals accurately and efficiently with complex angular masks, such as occur typically in galaxy surveys. Mangle performs the following tasks: converts masks between many handy formats (including HEALPix); rapidly finds the polygons containing a given point on the sphere; rapidly decomposes a set of polygons into disjoint parts; expands masks in spherical harmonics; generates random points with weights given by the mask; and implements computations for correlation function analysis. To mangle, a mask is an arbitrary union of arbitrarily weighted angular regions bounded by arbitrary numbers of edges. The restrictions on the mask are only (1) that each edge must be part of some circle on the sphere (but not necessarily a great circle), and (2) that the weight within each subregion of the mask must be constant. Mangle is complementary to and integrated with the HEALPix package (ascl:1107.018); mangle works with vector graphics whereas HEALPix works with pixels.
CORSIKA (COsmic Ray Simulations for KAscade) is a program for detailed simulation of extensive air showers initiated by high energy cosmic ray particles. Protons, light nuclei up to iron, photons, and many other particles may be treated as primaries. The particles are tracked through the atmosphere until they undergo reactions with the air nuclei or, in the case of unstable secondaries, decay. The hadronic interactions at high energies may be described by several reaction models. Hadronic interactions at lower energies are described, and in particle decays all decay branches down to the 1% level are taken into account. Options for the generation of Cherenkov radiation and neutrinos exist. CORSIKA may be used up to and beyond the highest energies of 100 EeV.
CRUNCH3D is a massively parallel, viscoresistive, three-dimensional compressible MHD code. The code employs a Fourier collocation spatial discretization, and uses a second-order Runge-Kutta temporal discretization. CRUNCH3D can be applied to MHD turbulence and magnetic fluxtube reconnection research.
Chombo provides a set of tools for implementing finite difference methods for the solution of partial differential equations on block-structured adaptively refined rectangular grids. Both elliptic and time-dependent modules are included. Chombo supports calculations in complex geometries with both embedded boundaries and mapped grids, and also supports particle methods. Most parallel platforms are supported, and cross-platform self-describing file formats are included.
The Chombo package is a product of the community of Collaborators working with the Applied Numerical Algorithms Group (ANAG), part of the Computational Research Division at LBNL.
MOOG performs a variety of LTE line analysis and spectrum synthesis tasks. The typical use of MOOG is to assist in the determination of the chemical composition of a star. The basic equations of LTE stellar line analysis are followed. The coding is in various subroutines that are called from a few driver routines; these routines are written in standard FORTRAN. The standard MOOG version has been developed on unix, linux and macintosh computers.
One of the chief assets of MOOG is its ability to do on-line graphics. The plotting commands are given within the FORTRAN code. MOOG uses the graphics package SM, chosen for its ease of implementation in FORTRAN codes. Plotting calls are concentrated in just a few routines, and it should be possible for users of other graphics packages to substitute other appropriate FORTRAN commands.
SPECTRE's chief purpose is the manipulation of single-order spectra, and it performs many of the tasks contained in such IRAF routines as "splot" and "rv". It is not meant to replace the much more general capabilities of IRAF, but does some functions in a manner that some might find useful. A brief list of SPECTRE tasks are: spectrum smoothing; equivalent width calculation; continuum rectification; noise spike excision; and spectrum comparison. SPECTRE was written to manipulate coude spectra, and thus is probably most useful for working on high dispersion spectra. Echelle spectra can be gathered from various observatories, reduced to singly-dimensioned spectra using IRAF, then written out as FITS files, thus becoming accessible to SPECTRE. Three different spectra may be manipulated and displayed simultaneously. SPECTRE, written in standard FORTRAN77, can be used only with the SM graphics package.
The Lattimer-Swesty Equation of State code is rapid enough to use directly in hydrodynamical simulations such as stellar collapse calculations. It contains an adjustable nuclear force that accurately models both potential and mean-field interactions and allows for the input of various nuclear parameters, including the bulk incompressibility parameter, the bulk and surface symmetry energies, the symmetric matter surface tension, and the nucleon effective masses. This permits parametric studies of the equation of state in astrophysical situations. The equation of state is modeled after the Lattimer, Lamb, Pethick, and Ravenhall (LLPR) compressible liquid drop model for nuclei, and includes the effects of interactions and degeneracy of the nucleon outside nuclei.
CoCoNuT is a general relativistic hydrodynamics code with dynamical space-time evolution. The main aim of this numerical code is the study of several astrophysical scenarios in which general relativity can play an important role, namely the collapse of rapidly rotating stellar cores and the evolution of isolated neutron stars. The code has two flavors: CoCoA, the axisymmetric (2D) magnetized version, and CoCoNuT, the 3D non-magnetized version.
Spectroscopy Made Easy (SME) is IDL software and a compiled external library that fits an observed high-resolution stellar spectrum with a synthetic spectrum to determine stellar parameters. The SME external library is available for Mac, Linux, and Windows systems. Atomic and molecular line data formatted for SME may be obtained from VALD. SME can solve for empirical log(gf) and damping parameters, using an observed spectrum of a star (usually the Sun) as a constraint.
FISA (Fast Integrated Spectra Analyzer) permits fast and reasonably accurate age and reddening determinations for small angular diameter open clusters by using their integrated spectra in the (3600-7400) AA range and currently available template spectrum libraries. This algorithm and its implementation help to achieve astrophysical results in shorter times than from other methods. FISA has successfully been applied to integrated spectroscopy of open clusters, both in the Galaxy and in the Magellanic Clouds, to determine ages and reddenings.
RADMC-3D is a software package for astrophysical radiative transfer calculations in arbitrary 1-D, 2-D or 3-D geometries. It is mainly written for continuum radiative transfer in dusty media, but also includes modules for gas line transfer and gas continuum transfer. RADMC-3D is a new incarnation of the older software package RADMC (ascl:1108.016).
ACIS Extract (AE), written in the IDL language, provides innovative and automated solutions to the varied challenges found in the analysis of X-ray data taken by the ACIS instrument on NASA's Chandra observatory. AE addresses complications found in many Chandra projects: large numbers of point sources (hundreds to several thousand), faint point sources, misaligned multiple observations of an astronomical field, point source crowding, and scientifically relevant diffuse emission. AE can perform virtually all the data processing and analysis tasks that lie between Level 2 ACIS data and publishable LaTeX tables of point-like and diffuse source properties and spectral models.
GALAPAGOS, Galaxy Analysis over Large Areas: Parameter Assessment by GALFITting Objects from SExtractor (ascl:1010.064), automates source detection, two-dimensional light-profile Sersic modelling and catalogue compilation in large survey applications. Based on a single setup, GALAPAGOS can process a complete set of survey images. It detects sources in the data, estimates a local sky background, cuts postage stamp images for all sources, prepares object masks, performs Sersic fitting including neighbours and compiles all objects in a final output catalogue. For the initial source detection GALAPAGOS applies SExtractor, while GALFIT (ascl:1104.010) is incorporated for modelling Sersic profiles. It measures the background sky involved in the Sersic fitting by means of a flux growth curve. GALAPAGOS determines postage stamp sizes based on SExtractor shape parameters. In order to obtain precise model parameters GALAPAGOS incorporates a complex sorting mechanism and makes use of multiplexing capabilities. It combines SExtractor and GALFIT data in a single output table. When incorporating information from overlapping tiles, GALAPAGOS automatically removes multiple entries from identical sources.
GALAPAGOS is programmed in the Interactive Data Language, IDL. A C implementation of the software, GALAPAGOS-C (ascl:1408.011), is available, and a multi-band Galapagos version is also available.
The DEEP2 DEIMOS Data Reduction Pipeline ("spec2d") is an IDL-based, automated software package designed to reduce Keck/DEIMOS multi-slit spectroscopic observations, collected as part of the DEEP2 Galaxy Redshift Survey. The pipeline is best suited for handling data taken with the 1200 line/mm grating tilted towards the red (lambda_c ~ 7800Å). The spec2d reduction package takes the raw DEIMOS data as its input and produces a variety of outputs including 2-d slit spectra and 1-d object spectra.
Bandpass shifting and the (1+z)5 surface brightness dimming (for a fixed width filter) make standard tools for the extraction of structural parameters of galaxies wavelength dependent. If only few (or one) observed high-res bands exist, this dependence has to be corrected to make unbiased statements on the evolution of structural parameters or on galaxy subsamples defined by morphology. FERENGI artificially redshifts low-redshift galaxy images to different redshifts by applying the correct cosmological corrections for size, surface brightness and bandpass shifting. A set of artificially redshifted galaxies in the range 0.1<z<1.1 using a set of ~100 SDSS low-redshift (v<7000 km s-1) images as input has been created to use as a training set of realistic images of galaxies of diverse morphologies and a large range of redshifts for the GEMS and COSMOS galaxy evolution projects. This training set allows other studies to investigate and quantify the effects of cosmological redshift on the determination of galaxy morphologies, distortions, and other galaxy properties that are potentially sensitive to resolution, surface brightness, and bandpass issues. The data sets are also available for download from the FERENGI website.
GYOTO, a general relativistic ray-tracing code, aims at computing images of astronomical bodies in the vicinity of compact objects, as well as trajectories of massive bodies in relativistic environments. This code is capable of integrating the null and timelike geodesic equations not only in the Kerr metric, but also in any metric computed numerically within the 3+1 formalism of general relativity. Simulated images and spectra have been computed for a variety of astronomical targets, such as a moving star or a toroidal accretion structure. The underlying code is open source and freely available. It is user-friendly, quickly handled and very modular so that extensions are easy to integrate. Custom analytical metrics and astronomical targets can be implemented in C++ plug-in extensions independent from the main code.
The star cluster evolution code Evolve Me A Cluster of StarS (EMACSS) is a simple yet physically motivated computational model that describes the evolution of some fundamental properties of star clusters in static tidal fields. The prescription is based upon the flow of energy within the cluster, which is a constant fraction of the total energy per half-mass relaxation time. According to Henon's predictions, this flow is independent of the precise mechanisms for energy production within the core, and therefore does not require a complete description of the many-body interactions therein. Dynamical theory and analytic descriptions of escape mechanisms is used to construct a series of coupled differential equations expressing the time evolution of cluster mass and radius for a cluster of equal-mass stars. These equations are numerically solved using a fourth-order Runge-Kutta integration kernel; the results were benchmarked against a data base of direct N-body simulations. EMACSS is publicly available and reproduces the N-body results to within ~10 per cent accuracy for the entire post-collapse evolution of star clusters.
Observational and theoretical evidence suggests that coronal heating is impulsive and occurs on very small cross-field spatial scales. A single coronal loop could contain a hundred or more individual strands that are heated quasi-independently by nanoflares. It is therefore an enormous undertaking to model an entire active region or the global corona. Three-dimensional MHD codes have inadequate spatial resolution, and 1D hydro codes are too slow to simulate the many thousands of elemental strands that must be treated in a reasonable representation. Fortunately, thermal conduction and flows tend to smooth out plasma gradients along the magnetic field, so "0D models" are an acceptable alternative. We have developed a highly efficient model called Enthalpy-Based Thermal Evolution of Loops (EBTEL) that accurately describes the evolution of the average temperature, pressure, and density along a coronal strand. It improves significantly upon earlier models of this type--in accuracy, flexibility, and capability. It treats both slowly varying and highly impulsive coronal heating; it provides the differential emission measure distribution, DEM(T), at the transition region footpoints; and there are options for heat flux saturation and nonthermal electron beam heating. EBTEL gives excellent agreement with far more sophisticated 1D hydro simulations despite using four orders of magnitude less computing time. It promises to be a powerful new tool for solar and stellar studies.
MegaLUT is a simple and fast method to correct ellipticity measurements of galaxies from the distortion by the instrumental and atmospheric point spread function (PSF), in view of weak lensing shear measurements. The method performs a classification of galaxies and associated PSFs according to measured shape parameters, and builds a lookup table of ellipticity corrections by supervised learning. This new method has been applied to the GREAT10 image analysis challenge, and demonstrates a refined solution that obtains the highly competitive quality factor of Q = 142, without any power spectrum denoising or training. Of particular interest is the efficiency of the method, with a processing time below 3 ms per galaxy on an ordinary CPU.
MYRIAD is a C++ code for collisional N-body simulations of star clusters. The code uses the Hermite fourth-order scheme with block time steps, for advancing the particles in time, while the forces and neighboring particles are computed using the GRAPE-6 board. Special treatment is used for close encounters, binary and multiple sub-systems that either form dynamically or exist in the initial configuration. The structure of the code is modular and allows the appropriate treatment of more physical phenomena, such as stellar and binary evolution, stellar collisions and evolution of close black-hole binaries. Moreover, it can be easily modified so that the part of the code that uses GRAPE-6 could be replaced by another module that uses other accelerating-hardware like the Graphics Processing Units (GPUs). Appropriate choice of the free parameters give a good accuracy and speed for simulations of star clusters up to and beyond core collapse. The code accuracy becomes comparable and even better than the accuracy of existing codes when a number of close binary systems is dynamically created in a simulation; this is due to the high accuracy of the method that is used for close binary and multiple sub-systems. The code can be used for evolving star clusters containing equal-mass stars or star clusters with an initial mass function (IMF) containing an intermediate mass black hole (IMBH) at the center and/or a fraction of primordial binaries, which are systems of particular astrophysical interest.
Youpi is a portable, easy to use web application providing high level functionalities to perform data reduction on scientific FITS images. Built on top of various open source reduction tools released to the community by TERAPIX (http://terapix.iap.fr), Youpi can help organize data, manage processing jobs on a computer cluster in real time (using Condor) and facilitate teamwork by allowing fine-grain sharing of results and data. Youpi is modular and comes with plugins which perform, from within a browser, various processing tasks such as evaluating the quality of incoming images (using the QualityFITS software package), computing astrometric and photometric solutions (using SCAMP), resampling and co-adding FITS images (using SWarp) and extracting sources and building source catalogues from astronomical images (using SExtractor). Youpi is useful for small to medium-sized data reduction projects; it is free and is published under the GNU General Public License.
SALT (Spectral Adaptive Lightcurve Template) is a package for Type Ia Supernovae light curve fitting. Its main purpose is to provide a distance estimator but it can also be used for photometric redshifts, and spectroscopic + photometric identification. This code is also known by the name snfit.
Astrometrica is an interactive software tool for scientific grade astrometric data reduction of CCD images. The current version of the software is for the Windows 32bit operating system family. Astrometrica reads FITS (8, 16 and 32 bit integer files) and SBIG image files. The size of the images is limited only by available memory. It also offers automatic image calibration (Dark Frame and Flat Field correction), automatic reference star identification, automatic moving object detection and identification, and access to new-generation star catalogs (PPMXL, UCAC 3 and CMC-14), in addition to online help and other features. Astrometrica is shareware, available for use for a limited period of time (100 days) for free; special arrangements can be made for educational projects.
Figaro (sometimes referred to as "standalone Figaro") is a data reduction system that originated at Caltech and whose development continued at the Anglo-Australian Observatory. Although it is intended to be able to deal with any sort of data, almost all its applications to date are geared towards processing optical and infrared data. Figaro uses hierarchical data structures to provide flexibility in its data file formats. Figaro was originally written to run under DEC's VMS operating system, but is now available both for VAX/VMS (by special request) and for various flavors of UNIX including Linux and MacOS.
A variant of Figaro (ascl:1411.022) is incorporated into the Starlink package (ascl:1110.012).
WM-basic is an easy-to-use interface to a program package which models the atmospheres of Hot Stars (and also SN and GN). The release comprises all programs required to calculate model atmospheres which especially yield ionizing fluxes and synthetic spectra. WM-basic is a native 32-bit application, conforming to the Multiple Documents Interface (MDI) standards for Windows XP/2000/NT/9x. All components of the program package have been compiled with Digital Visual Fortran V6.6(Pro) and Microsoft Visual C++.
pyBLoCXS is a sophisticated Markov chain Monte Carlo (MCMC) based algorithm designed to carry out Bayesian Low-Count X-ray Spectral (BLoCXS) analysis in the Sherpa environment. The code is a Python extension to Sherpa that explores parameter space at a suspected minimum using a predefined Sherpa model to high-energy X-ray spectral data. pyBLoCXS includes a flexible definition of priors and allows for variations in the calibration information. It can be used to compute posterior predictive p-values for the likelihood ratio test. The pyBLoCXS code has been tested with a number of simple single-component spectral models; it should be used with great care in more complex settings.
Budda is a Fortran code developed to perform a detailed structural analysis on galaxy images. It is simple to use and gives reliable estimates of the galaxy structural parameters, which can be used, for instance, in Fundamental Plane studies. Moreover, it has a powerful ability to reveal hidden sub-structures, like inner disks, secondary bars and nuclear rings.
Fosite implements a method for the solution of hyperbolic conservation laws in curvilinear orthogonal coordinates. It is written in Fortran 90/95 integrating object-oriented (OO) design patterns, incorporating the flexibility of OO-programming into Fortran 90/95 while preserving the efficiency of the numerical computation. Although mainly intended for CFD simulations, Fosite's modular design allows its application to other advection problems as well. Unlike other two-dimensional implementations of finite volume methods, it accounts for local conservation of specific angular momentum. This feature turns the program into a perfect tool for astrophysical simulations where angular momentum transport is crucial. Angular momentum transport is not only implemented for standard coordinate systems with rotational symmetry (i.e. cylindrical, spherical) but also for a general set of orthogonal coordinate systems allowing the use of exotic curvilinear meshes (e.g. oblate-spheroidal). As in the case of the advection problem, this part of the software is also kept modular, therefore new geometries may be incorporated into the framework in a straightforward manner.
MC3D is a 3D continuum radiative transfer code; it is based on the Monte-Carlo method and solves the radiative transfer problem self-consistently. It is designed for the simulation of dust temperatures in arbitrary geometric configurations and the resulting observables: spectral energy distributions, wavelength-dependent images, and polarization maps. The main objective is the investigation of "dust-dominated" astrophysical systems such as young stellar objects surrounded by an optically thick circumstellar disk and an optically thin(ner) envelope, debris disks around more evolved stars, asymptotic giant branch stars, the dust component of the interstellar medium, and active galactic nuclei.
GRASIL (which stands for GRAphite and SILicate) computes the spectral evolution of stellar systems taking into account the effects of dust, which absorbs and scatters optical and UV photons and emits in the IR-submm region. It may be used as well to do “standard” no-dust stellar spectral synthesis. The code is very well calibrated and applied to interpret galaxies at different redshifts. GRASIL can be downloaded or run online using the GALSYNTH WEB interface.
VH-1 is a multidimensional ideal compressible hydrodynamics code written in FORTRAN for use on any computing platform, from desktop workstations to supercomputers. It uses a Lagrangian remap version of the Piecewise Parabolic Method developed by Paul Woodward and Phil Colella in their 1984 paper. VH-1 comes in a variety of versions, from a simple one-dimensional serial variant to a multi-dimensional version scalable to thousands of processors.
StarFISH is a suite of programs designed to determine the star formation history (SFH) of a stellar population, given multicolor stellar photometry and a library of theoretical isochrones. It constructs a library of synthetic color-magnitude diagrams from the isochrones, which includes the effects of extinction, photometric errors and completeness, and binarity. A minimization routine is then used to determine the linear combination of synthetic CMDs that best matches the observed photometry. The set of amplitudes modulating each synthetic CMD describes the star formation history of the observed stellar population.
STOKES was designed to perform three-dimensional radiative transfer simulations for astronomical applications. The code also considers the polarization properties of the radiation. The program is based on the Monte-Carlo method and treats optical and ultraviolet polarization induced by scattering off free electrons or dust grains. Emission and scattering regions can be arranged in various geometries within the model space, the computed continuum and line spectra can be evaluated at different inclinations and azimuthal viewing angles.
Shape is a flexible interactive 3D morpho-kinematical modeling application for astrophysics. It reduces the restrictions on the physical assumptions, data type and amount required for a reconstruction of an object's morphology. It applies interactive graphics and allows astrophysicists to provide a-priori knowledge about the object by interactively defining 3D structural elements. By direct comparison of model prediction with observational data, model parameters can then be automatically optimized to fit the observation.
The EXtraction of COsmological Parameters software (EXCOP) is a set of C and IDL programs together with a very large database of cosmological models generated by CMBFAST (ascl:9909.004) that will compute likelihood functions for cosmological parameters given some CMB data. This is the software and database used in the Stompor et al. (2001) analysis of a high resoultion Maxima1 CMB anisotropy map.
VirGO is the next generation Visual Browser for the ESO Science Archive Facility developed by the Virtual Observatory (VO) Systems Department. It is a plug-in for the popular open source software Stellarium adding capabilities for browsing professional astronomical data. VirGO gives astronomers the possibility to easily discover and select data from millions of observations in a new visual and intuitive way. Its main feature is to perform real-time access and graphical display of a large number of observations by showing instrumental footprints and image previews, and to allow their selection and filtering for subsequent download from the ESO SAF web interface. It also allows the loading of external FITS files or VOTables, the superimposition of Digitized Sky Survey (DSS) background images, and the visualization of the sky in a `real life' mode as seen from the main ESO sites. All data interfaces are based on Virtual Observatory standards which allow access to images and spectra from external data centers, and interaction with the ESO SAF web interface or any other VO applications supporting the PLASTIC messaging system.
ORSA is an interactive tool for scientific grade Celestial Mechanics computations. Asteroids, comets, artificial satellites, solar and extra-solar planetary systems can be accurately reproduced, simulated, and analyzed. The software uses JPL ephemeris files for accurate planets positions and has a Qt-based graphical user interface. It offers an advanced 2D plotting tool and 3D OpenGL viewer and the standalone numerical library liborsa and can import asteroids and comets from all the known databases (MPC, JPL, Lowell, AstDyS, and NEODyS). In addition, it has an integrated download tool to update databases.
WOMBAT (sWift Objects for Mhd BAsed on Tvd) is an astrophysical fluid code that is an implementation of a non-relativistic MHD TVD scheme; an extension for relativistic MHD has been added. The code operates on 1, 2, and 3D Eulerian meshes (cartesian and cylindrical coordinates) with magnetic field divergence restriction controlled by a constrained transport (CT) scheme. The user can tune code performance to a given processor based on chip cache sizes. Proper settings yield significant speed-ups due to efficient cache reuse.
The PROFIT is an IDL routine to do automated fitting of emission-line profiles by Gaussian curves or Gauss-Hermite series optimized for use in Integral Field and Fabry-Perot data cubes. As output PROFIT gives two-dimensional FITS files for the emission-line flux distribution, centroid velocity, velocity dispersion and higher order Gauss-Hermite moments (h3 and h4).
A modular software package for automatically fitting astrometric world coordinates (WCS) onto raw optical or infrared FITS images. Image stars are identified with stars in a reference catalog (USNO-A2 or 2MASS), and coordinates derived as a simple linear transformation from (X,Y) pixels to (RA,DEC) to the accuracy level of the reference catalog used. The package works with both optical and infrared images, at sidereal and non-sidereal tracking rates.
epsnoise simulates pixel noise in weak-lensing ellipticity and shear measurements. This open-source python code can efficiently create an intrinsic ellipticity distribution, shear it, and add noise, thereby mimicking a "perfect" measurement that is not affected by shape-measurement biases. For theoretical studies, we provide the Marsaglia distribution, which describes the ratio of normal variables in the general case of non-zero mean and correlation. We also added a convenience method that evaluates the Marsaglia distribution for the ratio of moments of a Gaussian-shaped brightness distribution, which gives a very good approximation of the measured ellipticity distribution also for galaxies with different radial profiles. We provide four shear estimators, two based on the ε ellipticity measure, two on χ. While three of them are essentially plain averages, we introduce a new estimator which requires a functional minimization.
The Mechanic package is a numerical framework for dynamical astronomy, designed to help in massive numerical simulations by efficient task management and unified data storage. The code is built on top of the Message Passing Interface (MPI) and Hierarchical Data Format (HDF5) standards and uses the Task Farm approach to manage numerical tasks. It relies on the core-module approach. The numerical problem implemented in the user-supplied module is separated from the host code (core). The core is designed to handle basic setup, data storage and communication between nodes in a computing pool. It has been tested on large CPU-clusters, as well as desktop computers. The Mechanic may be used in computing dynamical maps, data optimization or numerical integration.
p3d is semi-automatic data-reduction tool designed to be used with fiber-fed integral-field spectrographs. p3d is a highly general and freely available tool based on IDL but can be used with full functionality without an IDL license. It is easily extended to include improved algorithms, new visualization tools, and support for additional instruments. It uses a novel algorithm for automatic finding and tracing of spectra on the detector, and includes two methods of optimal spectrum extraction in addition to standard aperture extraction. p3d also provides tools to combine several images, perform wavelength calibration and flat field data.
MIA+EWS is a package of two data reduction tools for MIDI data which uses power-spectrum analysis or the information contained in the spectrally-dispersed fringe measurements in order to estimate the correlated flux and the visibility as function of wavelength in the N-band. MIA, which stands for MIDI Interactive Analysis, uses a Fast Fourier Transformation to calculate the Fourier amplitudes of the fringe packets to calculate the correlated flux and visibility. EWS stands for Expert Work-Station, which is a collection of IDL tools to apply coherent visibility analysis to reduce MIDI data. The EWS package allows the user to control and examine almost every aspect of MIDI data and its reduction. The usual data products are the correlated fluxes, total fluxes and differential phase.
Turbospectrum is a 1D LTE spectrum synthesis code which covers 600 molecules, is fast with many lines, and uses the treatment of line broadening described by Barklem & O’Mara (1998).
Gravitational flexion is a technique for measuring 2nd order gravitational lensing signals in background galaxies and radio lobes. Unlike shear, flexion directly probes variations of the potential field. Moreover, the information contained in flexion is orthogonal to what is found in the shear. Thus, we get the information "for free."
Iris is a downloadable Graphical User Interface (GUI) application which allows the astronomer to build and analyze wide-band Spectral Energy Distributions (SEDs). The components of Iris have been contributed by members of the VAO. Specview, contributed by STScI, provides a GUI for reading, editing, and displaying SEDs, as well as defining models and parameter values. Sherpa, contributed by the Chandra project at SAO, provides a library of models, fit statistics, and optimization methods; the underlying I/O library, SEDLib, is a VAO product written by SAO to current IVOA (International Virtual Observatory Alliance) data model standards. NED is a service provided by IPAC for easy location of data for a given extragalactic source, including SEDs. SedImporter converts non-standard SED data files into a format supported by Iris.
Mayavi provides general-purpose 3D scientific visualizations. It offers easy interactive tools for data visualization that fit with the scientific user's workflow. Mayavi provides several entry points: a full-blown interactive application; a Python library with both a MATLAB-like interface focused on easy scripting and a feature-rich object hierarchy; widgets associated with these objects for assembling in a domain-specific application, and plugins that work with a general purpose application-building framework.
ARES was developed for the measurement of Equivalent Width of absortion lines in stellar spectra; it can also be used to determine fundamental spectroscopic stellar parameters.The code reads a 1D FITS spectra and fits the requested lines in order to calculate the Equivalent width. The code is written in C++ based on the standard method of determining EWs. It automates the manual procedure that one normally carries out when using interactive routines such as the splot routine implemented in IRAF.
The Meudon PDR code computes the atomic and molecular structure of interstellar clouds. It can be used to study the physics and chemistry of diffuse clouds, photodissociation regions (PDRs), dark clouds, or circumstellar regions. The model computes the thermal balance of a stationary plane-parallel slab of gas and dust illuminated by a radiation field and takes into account heating processes such as the photoelectric effect on dust, chemistry, cosmic rays, etc. and cooling resulting from infrared and millimeter emission of the abundant species. Chemistry is solved for any number of species and reactions. Once abundances of atoms and molecules and level excitation of the most important species have been computed at each point, line intensities and column densities can be deduced.
VOSpec is a multi-wavelength spectral analysis tool with access to spectra, theoretical models and atomic and molecular line databases registered in the VO. The standard tools of VOSpec include line and continuum fitting, redshift and reddening correction, spectral arithmetic and convolution between spectra, equivalent width and flux calculations, and a best fitting algorithm for fitting selected SEDs to a TSAP service. VOSpec offers several display modes (tree vs table) and organising functionalities according to the available metadata for each service, including distance from the observation position.
RegiStax is software for alignment/stacking/processing of images; it was released over 10 years ago and continues to be developed and improved. The current version is RegiStax 6, which supports the following formats: AVI, SER, RFL (RegiStax Framelist), BMP, JPG, TIF, and FIT. This version has a shorter and simpler processing sequence than its predecessor, and optimizing isn't necessary anymore as a new image alignment method optimizes directly. The interface of RegiStax 6 has been simplified to look more uniform in appearance and functionality, and RegiStax 6 now uses Multi-core processing, allowing the user to have up to have multiple cores(recommended to use maximally 4) working simultaneous during alignment/stacking.
The ESA/ESO/NASA FITS Liberator makes it possible to process and edit astronomical science data in the FITS format to produce stunning images of the universe. Formerly a plugin for Adobe Photoshop, the current version of FITS Liberator is a stand-alone application and no longer requires Photoshop. This image processing software makes it possible to create color images using raw observations from a range of telescopes; the FITS Liberator continues to support the FITS and PDS formats, preferred by astronomers and planetary scientists respectively, which enables data to be processed from a wide range of telescopes and planetary probes, including ESO’s Very Large Telescope, the NASA/ESA Hubble Space Telescope, NASA’s Spitzer Space Telescope, ESA’s XMM–Newton Telescope and Cassini–Huygens or Mars Reconnaissance Orbiter.
The Space Telescope Science Data Analysis System (STSDAS) is a software package for reducing and analyzing astronomical data. It is layered on top of IRAF and provides general-purpose tools for astronomical data analysis as well as routines specifically designed for HST data. In particular, STSDAS contains all the programs used for the calibration and reduction of HST data in the STScI post-observation processing pipelines.
MOLSCAT version 14 is a FORTRAN code for quantum mechanical (coupled channel) solution of the nonreactive molecular scattering problem and was developed to obtain collision rates for molecules in the interstellar gas which are needed to understand microwave and infrared astronomical observations. The code is implemented for various types of collision partners. In addition to the essentially exact close coupling method several approximate methods, including the Coupled States and Infinite Order Sudden approximations, are provided. This version of the code has been superseded by MOLSCAT 2020 (ascl:2010.001).
bhint is a post-Newtonian, high-precision integrator for stellar systems surrounding a super-massive black hole. The algorithm makes use of the fact that the Keplerian orbits in such a potential can be calculated directly and are only weakly perturbed. For a given average number of steps per orbit, bhint is almost a factor of 100 more accurate than the standard Hermite method.
statpl estimates the parameter of power-law distributed data and calculates goodness-of-fit tests for them. Many objects studied in astronomy follow a power-law distribution function (DF), for example the masses of stars or star clusters. Such data is often analyzed by generating a histogram and fitting a straight line to it. The parameters obtained in this way can be severely biased, and the properties of the underlying DF, such as its shape or a possible upper limit, are difficult to extract. statpl is an (effectively) bias-free estimator for the exponent and the upper limit.
Plumix is a small package for generating mass segregated star clusters. Its output can be directly used as input initial conditions for NBODY4 or NBODY6 code. Mass segregation stands as one of the most robust features of the dynamical evolution of self-gravitating star clusters. We formulate parametrized models of mass segregated star clusters in virial equilibrium. To this purpose we introduce mean inter-particle potentials for statistically described unsegregated systems and suggest a single-parameter generalization of its form which gives a mass-segregated state. Plumix is a numerical C-code generating the cluster according the algorithm given for construction of appropriate star cluster models. Their stability over several crossing-times is verified by following the evolution by means of direct N-body integration.
Catena integrates the orbits of an ensemble of stars using the chain-regularization method (Mikkola & Aarseth) with an embedded Runge-Kutta integration method of 9(8)th order (Prince & Dormand).
Libimf provides a collection of programming functions based on the general IMF-algorithm by Pflamm-Altenburg & Kroupa (2006).
mkj_libs provides a set of helper routines (vector operations, astrometry, statistical analysis of spherical data) for the main plane-fitting and analysis tools.
The parameters of the mutual orbit of eclipsing binaries that are physically connected can be obtained by precision timing of minima over time through light travel time effect, apsidal motion or orbital precession. This, however, requires joint analysis of data from different sources obtained through various techniques and with insufficiently quantified uncertainties. In particular, photometric uncertainties are often underestimated, which yields too small uncertainties in minima timings if determined through analysis of a χ2 surface. The task is even more difficult for double eclipsing binaries, especially those with periods close to a resonance such as CzeV344, where minima get often blended with each other.
This code solves the double binary parameters simultaneously and then uses these parameters to determine minima timings (or more specifically O-C values) for individual datasets. In both cases, the uncertainties (or more precisely confidence intervals) are determined through bootstrap resampling of the original data. This procedure to a large extent alleviates the common problem with underestimated photometric uncertainties and provides a check on possible degeneracies in the parameters and the stability of the results. While there are shortcomings to this method as well when compared to Markov Chain Monte Carlo methods, the ease of the implementation of bootstrapping is a significant advantage.
Time Utilities are software tools that, in principal, allow one to calculate BJD to a precision of 1 μs for any target from anywhere on Earth or from any spacecraft. As the quality and quantity of astrophysical data continue to improve, the precision with which certain astrophysical events can be timed becomes limited not by the data themselves, but by the manner, standard, and uniformity with which time itself is referenced. While some areas of astronomy (most notably pulsar studies) have required absolute time stamps with precisions of considerably better than 1 minute for many decades, recently new areas have crossed into this regime. In particular, in the exoplanet community, we have found that the (typically unspecified) time standards adopted by various groups can differ by as much as a minute. Left uncorrected, this ambiguity may be mistaken for transit timing variations and bias eccentricity measurements. We recommend using BJD_TDB, the Barycentric Julian Date in the Barycentric Dynamical Time standard for any astrophysical event. The BJD_TDB is the most practical absolute time stamp for extraterrestrial phenomena, and is ultimately limited by the properties of the target system. We compile a general summary of factors that must be considered in order to achieve timing precisions ranging from 15 minutes to 1 μs, and provide software for download and online webapps for use.
ImageJ is a public domain Java image processing program inspired by NIH Image. It can display, edit, analyze, process, save and print 8-bit, 16-bit and 32-bit images. It can read many image formats including TIFF, GIF, JPEG, BMP, DICOM, FITS and "raw". It supports "stacks", a series of images that share a single window. It is multithreaded, so time-consuming operations such as image file reading can be performed in parallel with other operations.
ImageHealth (IH) is a c program that makes use of standard CFITSIO routines to examine, in an automated fashion, .FITS images with any number of extensions, find objects within those images, and determine basic parameters of those images (stellar flux, background counts, FWHM, and ellipticity, along with sky background counts) in order to provide a snapshot of the quality of those images. A variety of python wrappers have also been written to test large numbers of such images and compare the results of ImageHealth to other image analysis programs, such as SourceExtractor. Additional IH-related tools will be made available in the future.
EXOFAST is a fast, robust suite of routines written in IDL which is designed to fit exoplanetary transits and radial velocity variations simultaneously or separately, and characterize the parameter uncertainties and covariances with a Differential Evolution Markov Chain Monte Carlo method. Our code self-consistently incorporates both data sets to simultaneously derive stellar parameters along with the transit and RV parameters, resulting in consistent, but tighter constraints on an example fit of the discovery data of HAT-P-3b that is well-mixed in under two minutes on a standard desktop computer. EXOFAST has an easy-to-use online interface for several basic features of our transit and radial velocity fitting. A more robust version of EXOFAST, EXOFASTv2 (ascl:1710.003), is also available.
HiGPUs is an implementation of the numerical integration of the classical, gravitational, N-body problem, based on a 6th order Hermite’s integration scheme with block time steps, with a direct evaluation of the particle-particle forces. The main innovation of this code is its full parallelization, exploiting both OpenMP and MPI in the use of the multicore Central Processing Units as well as either Compute Unified Device Architecture (CUDA) or OpenCL for the hosted Graphic Processing Units. We tested both performance and accuracy of the code using up to 256 GPUs in the supercomputer IBM iDataPlex DX360M3 Linux Infiniband Cluster provided by the italian supercomputing consortium CINECA, for values of N ≤ 8 millions. We were able to follow the evolution of a system of 8 million bodies for few crossing times, task previously unreached by direct summation codes.
HiGPUs is also available as part of the AMUSE project.
The Versatile Advection Code (VAC) is a freely available general hydrodynamic and magnetohydrodynamic simulation software that works in 1, 2 or 3 dimensions on Cartesian and logically Cartesian grids. VAC runs on any Unix/Linux system with a Fortran 90 (or 77) compiler and Perl interpreter. VAC can run on parallel machines using either the Message Passing Interface (MPI) library or a High Performance Fortran (HPF) compiler.
Hyperion is a three-dimensional dust continuum Monte-Carlo radiative transfer code that is designed to be as generic as possible, allowing radiative transfer to be computed through a variety of three-dimensional grids. The main part of the code is problem-independent, and only requires an arbitrary three-dimensional density structure, dust properties, the position and properties of the illuminating sources, and parameters controlling the running and output of the code. Hyperion is parallelized, and is shown to scale well to thousands of processes. Two common benchmark models for protoplanetary disks were computed, and the results are found to be in excellent agreement with those from other codes. Finally, to demonstrate the capabilities of the code, dust temperatures, SEDs, and synthetic multi-wavelength images were computed for a dynamical simulation of a low-mass star formation region.
Conventional algorithms for rejecting cosmic rays in single CCD exposures rely on the contrast between cosmic rays and their surroundings and may produce erroneous results if the point-spread function is smaller than the largest cosmic rays. This code uses a robust algorithm for cosmic-ray rejection, based on a variation of Laplacian edge detection. The algorithm identifies cosmic rays of arbitrary shapes and sizes by the sharpness of their edges and reliably discriminates between poorly sampled point sources and cosmic rays. Examples of its performance are given for spectroscopic and imaging data, including Hubble Space Telescope Wide Field Planetary Camera 2 images, in the code paper.
This code provides a method for detecting cosmic rays in single images. The algorithm is based on a simple analysis of the histogram of the image data and does not use any modeling of the picture of the object. It does not require a good signal-to-noise ratio in the image data. Identification of multiple-pixel cosmic-ray hits is realized by running the procedure for detection and replacement iteratively. The method is very effective when applied to the images with spectroscopic data, and is also very fast in comparison with other single-image algorithms found in astronomical data-processing packages. Practical implementation and examples of application are presented in the code paper.
Astropysics is a library containing a variety of utilities and algorithms for reducing, analyzing, and visualizing astronomical data. Best of all, it encourages the user to leverage the existing capabilities of Python to make this quick, easy, and as painless as cutting-edge science can even actually be. There do exist other Python packages with some of the capabilities of this project, but the goal of this project is to integrate all these tools together and make them interact in the most straightforward ways possible.
xSonify maps scientific data to acoustic sequences. Listening to data can help discover patterns in huge amounts of data. Written in Java, xSonify allows visually impaired people to examine numerical data for patterns. The data can be imported from local files or from remote databases via the Internet. Single results of measurements from spacecraft instruments can be selected by their corresponding variables in a specific time frame. The results are transformed into MIDI sequences which can be played with a selection of different instruments from a soundbank. Another software module enables xSonify to convert the sonified data into other sound formats to make it easier to archive and exchange the Sonification results with other scientists.
PyFITS provides an interface to FITS formatted files in the Python scripting language and PyRAF, the Python-based interface to IRAF. It is useful both for interactive data analysis and for writing analysis scripts in Python using FITS files as either input or output. PyFITS is a development project of the Science Software Branch at the Space Telescope Science Institute.
PyFITS has been deprecated. Please see Astropy.
The PySALT user package contains the primary reduction and analysis software tools for the SALT telescope. Currently, these tools include basic data reductions for RSS and SALTICAM in both imaging, spectroscopic, and slot modes. Basic analysis software for slot mode data is also provided. These tools are primarily written in python/PyRAF with some additional IRAF code.
PyRAF is a command language for running IRAF tasks that is based on the Python scripting language. It gives users the ability to run IRAF tasks in an environment that has all the power and flexibility of Python. PyRAF can be installed along with an existing IRAF installation; users can then choose to run either PyRAF or the IRAF CL.
The mid-infrared spectra of ultraluminous infrared galaxies (ULIRGs) contain a variety of spectral features that can be used as diagnostics to characterize the spectra. However, such diagnostics are biased by our prior prejudices on the origin of the features. Moreover, by using only part of the spectrum they do not utilize the full information content of the spectra. Blind statistical techniques such as principal component analysis (PCA) consider the whole spectrum, find correlated features and separate them out into distinct components.
This code, written in IDL, classifies principal components of IRS spectra to define a new classification scheme using 5D Gaussian mixtures modelling. The five PCs and average spectra for the four classifications to classify objects are made available with the code.
The JKTEBOP code is used to fit a model to the light curves of detached eclipsing binary stars in order to derive the radii of the stars as well as various other quantities. It is very stable and includes extensive Monte Carlo or bootstrapping error analysis algorithms. It is also excellent for transiting extrasolar planetary systems. All input and output is done by text files; JKTEBOP is written in almost-standard FORTRAN 77 using first the g77 compiler and now the ifort compiler.
wvrgcal is a command line front end to LibAIR, the atmospheric inference library for phase correction of ALMA data using water vapour radiometers, and is the user-facing application for calculating atmospheric phase correction from WVR data. wvrgcal outputs a CASA gain calibration table which can then be applied to the observed data in the usual way.
Note: wvrgcal has been incorporated into the NRAO CASA suite.
Astrometry.net is a reliable and robust system that takes as input an astronomical image and returns as output the pointing, scale, and orientation of that image (the astrometric calibration or World Coordinate System information). The system requires no first guess, and works with the information in the image pixels alone; that is, the problem is a generalization of the "lost in space" problem in which nothing—not even the image scale—is known. After robust source detection is performed in the input image, asterisms (sets of four or five stars) are geometrically hashed and compared to pre-indexed hashes to generate hypotheses about the astrometric calibration. A hypothesis is only accepted as true if it passes a Bayesian decision theory test against a null hypothesis. With indices built from the USNO-B catalog and designed for uniformity of coverage and redundancy, the success rate is >99.9% for contemporary near-ultraviolet and visual imaging survey data, with no false positives. The failure rate is consistent with the incompleteness of the USNO-B catalog; augmentation with indices built from the Two Micron All Sky Survey catalog brings the completeness to 100% with no false positives. We are using this system to generate consistent and standards-compliant meta-data for digital and digitized imaging from plate repositories, automated observatories, individual scientific investigators, and hobbyists.
The BINSYN program suite is a collection of programs for analysis of binary star systems with or without an optically thick accretion disk. BINSYN produces synthetic spectra of individual binary star components plus a synthetic spectrum of the system. If the system includes an accretion disk, BINSYN also produces a separate synthetic spectrum of the disk face and rim. A system routine convolves the synthetic spectra with filter profiles of several photometric standards to produce absolute synthetic photometry output. The package generates synthetic light curves and determines an optimized solution for system parameters.
Aperture Photometry Tool (APT) is software for astronomers and students interested in manually exploring the photometric qualities of astronomical images. It has a graphical user interface (GUI) which allows the image data associated with aperture photometry calculations for point and extended sources to be visualized and, therefore, more effectively analyzed. Mouse-clicking on a source in the displayed image draws a circular or elliptical aperture and sky annulus around the source and computes the source intensity and its uncertainty, along with several commonly used measures of the local sky background and its variability. The results are displayed and can be optionally saved to an aperture-photometry-table file and plotted on graphs in various ways using functions available in the software. APT is geared toward processing sources in a small number of images and is not suitable for bulk processing a large number of images, unlike other aperture photometry packages (e.g., SExtractor). However, APT does have a convenient source-list tool that enables calculations for a large number of detections in a given image. The source-list tool can be run either in automatic mode to generate an aperture photometry table quickly or in manual mode to permit inspection and adjustment of the calculation for each individual detection. APT displays a variety of useful graphs, including image histogram, and aperture slices, source scatter plot, sky scatter plot, sky histogram, radial profile, curve of growth, and aperture-photometry-table scatter plots and histograms. APT has functions for customizing calculations, including outlier rejection, pixel “picking” and “zapping,” and a selection of source and sky models. The radial-profile-interpolation source model, accessed via the radial-profile-plot panel, allows recovery of source intensity from pixels with missing data and can be especially beneficial in crowded fields.
PyKE is a python-based PyRAF package that can also be run as a stand-alone program within a unix-based shell without compiling against PyRAF. It is a group of tasks developed for the reduction and analysis of Kepler Simple Aperture Photometry (SAP) data of individual targets with individual characteristics. The main purposes of these tasks are to i) re-extract light curves from manually-chosen pixel apertures and ii) cotrend and/or detrend the data in order to reduce or remove systematic noise structure using methods tunable to user and target-specific requirements. PyKE is an open source project and contributions of new tasks or enhanced functionality of existing tasks by the community are welcome.
The Planck Sky Model (PSM) is a global representation of the multi-component sky at frequencies ranging from a few GHz to a few THz. It summarizes in a synthetic way as much of our present knowledge as possible of the GHz sky. PSM is a complete and versatile set of programs and data that can be used for the simulation or the prediction of sky emission in the frequency range of typical CMB experiments, and in particular of the Planck sky mission. It was originally developed as part of the activities of Planck component separation Working Group (or "Working Group 2" - WG2), and of the ADAMIS team at APC.
PSM gives users the opportunity to investigate the model in some depth: look at its parameters, visualize its predictions for all individual components in various formats, simulate sky emission compatible with a given parameter set, and observe the modeled sky with a synthetic instrument. In particular, it makes possible the simulation of sky emission maps as could be plausibly observed by Planck or other CMB experiments that can be used as inputs for the development and testing of data processing and analysis techniques.
This suite contains two packages for computing cosmological quantities on the GPU: aperture_mass, which calculates the aperture mass map for a given dataset using the filter proposed by Schirmer et al (2007) (an NFW profile with exponential cut-offs at zero and large radii), and angular_correlation, which calculates the 2-pt angular correlation function using data and a flat distribution of randomly generated galaxies. A particular estimator is chosen, but the user has the flexibility to explore other estimators.
Big MACS is a Python program that estimates an accurate photometric calibration from only an input catalog of stellar magnitudes and filter transmission functions. The user does not have to measure color terms which can be difficult to characterize. Supplied with filter transmission functions, Big MACS synthesizes an expected stellar locus for your data and then simultaneously solves for all unknown zeropoints when fitting to the instrumental locus. The code uses a spectroscopic model for the SDSS stellar locus in color-color space and filter functions to compute expected locus. The stellar locus model is corrected for Milky Way reddening. If SDSS or 2MASS photometry is available for stars in field, Big MACS can yield a highly accurate absolute calibration.
Tilted Ring Fitting Code (TiRiFiC) is a prototype computer program to construct simulated (high-resolution) astronomical spectroscopic 3d-observations (data cubes) of simple kinematical and morphological models of rotating (galactic) disks. It is possible to automatically optimize the parameterizations of constructed model disks to fit spectroscopic (3d-) observations via a χ2 minimization. TiRiFiC is currently implemented as an add-on to the Groningen Image Processing System (GIPSY) software package and attempts to provide a method to automatically fit an extended tilted-ring model directly to a data cube.
BLOBCAT is a source extraction software that utilizes the flood fill algorithm to detect and catalog blobs, or islands of pixels representing sources, in 2D astronomical images. The software is designed to process radio-wavelength images of both Stokes I intensity and linear polarization, the latter formed through the quadrature sum of Stokes Q and U intensities or as a by-product of rotation measure synthesis. BLOBCAT corrects for two systematic biases to enable the flood fill algorithm to accurately measure flux densities for Gaussian sources. BLOBCAT exhibits accurate measurement performance in total intensity and, in particular, linear polarization, and is particularly suited to the analysis of large survey data.
BASE is a novel program for the combined or separate Bayesian analysis of astrometric and radial-velocity measurements of potential exoplanet hosts and binary stars. The tool fulfills two major tasks of exoplanet science, namely the detection of exoplanets and the characterization of their orbits. BASE was developed to provide the possibility of an integrated Bayesian analysis of stellar astrometric and Doppler-spectroscopic measurements with respect to their binary or planetary companions’ signals, correctly treating the astrometric measurement uncertainties and allowing to explore the whole parameter space without the need for informative prior constraints. The tool automatically diagnoses convergence of its Markov chain Monte Carlo (MCMC[2]) sampler to the posterior and regularly outputs status information. For orbit characterization, BASE delivers important results such as the probability densities and correlations of model parameters and derived quantities. BASE is a highly configurable command-line tool developed in Fortran 2008 and compiled with GFortran. Options can be used to control the program’s behaviour and supply information such as the stellar mass or prior information. Any option can be supplied in a configuration file and/or on the command line.
Fewbody is a numerical toolkit for simulating small-N gravitational dynamics. It is a general N-body dynamics code, although it was written for the purpose of performing scattering experiments, and therefore has several features that make it well-suited for this purpose. Fewbody uses the 8th-order Runge-Kutta Prince-Dormand integration method with 9th-order error estimate and adaptive timestep to advance the N-body system forward in time. It integrates the usual formulation of the N-body equations in configuration space, but allows for the option of global pairwise Kustaanheimo-Stiefel (K-S) regularization (Heggie 1974; Mikkola 1985). The code uses a binary tree algorithm to classify the N-body system into a set of independently bound hierarchies, and performs collisions between stars in the “sticky star” approximation. Fewbody contains a collection of command line utilities that can be used to perform individual scattering and N-body interactions, but is more generally a library of functions that can be used from within other codes.
Swarm-NG is a C++ library for the efficient direct integration of many n-body systems using highly-parallel Graphics Processing Units (GPU). Swarm-NG focuses on many few-body systems, e.g., thousands of systems with 3...15 bodies each, as is typical for the study of planetary systems; the code parallelizes the simulation, including both the numerical integration of the equations of motion and the evaluation of forces using NVIDIA's "Compute Unified Device Architecture" (CUDA) on the GPU. Swarm-NG includes optimized implementations of 4th order time-symmetrized Hermite integration and mixed variable symplectic integration as well as several sample codes for other algorithms to illustrate how non-CUDA-savvy users may themselves introduce customized integrators into the Swarm-NG framework. Applications of Swarm-NG include studying the late stages of planet formation, testing the stability of planetary systems and evaluating the goodness-of-fit between many planetary system models and observations of extrasolar planet host stars (e.g., radial velocity, astrometry, transit timing). While Swarm-NG focuses on the parallel integration of many planetary systems,the underlying integrators could be applied to a wide variety of problems that require repeatedly integrating a set of ordinary differential equations many times using different initial conditions and/or parameter values.
SolarSoft is a set of integrated software libraries, data bases, and system utilities which provide a common programming and data analysis environment for Solar Physics. The SolarSoftWare (SSW) system is built from Yohkoh, SOHO, SDAC and Astronomy libraries and draws upon contributions from many members of those projects. It is primarily an IDL based system, although some instrument teams integrate executables written in other languages. The SSW environment provides a consistent look and feel at widely distributed co-investigator institutions to facilitate data exchange and to stimulate coordinated analysis. Commonalities and overlap in solar data and analysis goals are exploited to permit application of fundamental utilities to the data from many different solar instruments. The use of common libraries, utilities, techniques and interfaces minimizes the learning curve for investigators who are analyzing new solar data sets, correlating results from multiple experiments or performing research away from their home institution.
MPI-AMRVAC is an MPI-parallelized Adaptive Mesh Refinement code, with some heritage (in the solver part) to the Versatile Advection Code or VAC, initiated by Gábor Tóth at the Astronomical Institute at Utrecht in November 1994, with help from Rony Keppens since 1996. Previous incarnations of the Adaptive Mesh Refinement version of VAC were of restricted use only, and have been used for basic research in AMR strategies, or for well-targeted applications. This MPI version uses a full octree block-based approach, and allows for general orthogonal coordinate systems. MPI-AMRVAC aims to advance any system of (primarily hyperbolic) partial differential equations by a number of different numerical schemes. The emphasis is on (near) conservation laws, with shock-dominated problems as a main research target. The actual equations are stored in separate modules, can be added if needed, and they can be selected by a simple configuration of the VACPP preprocessor. The dimensionality of the problem is also set through VACPP. The numerical schemes are able to handle discontinuities and smooth flows as well.
Lare3d is a Lagrangian-remap code for solving the non-linear MHD equations in three spatial dimensions.
The VARTOOLS program is a command line utility that provides tools for analyzing time series astronomical data. It implements a number of routines for calculating variability/periodicity statistics of light curves, as well as tools for modifying and filtering light curves.
APLpy (the Astronomical Plotting Library in Python) is a Python module for producing publication-quality plots of astronomical imaging data in FITS format. The module uses Matplotlib, a powerful and interactive plotting package. It is capable of creating output files in several graphical formats, including EPS, PDF, PS, PNG, and SVG. Plots can be made interactively or by using scripts, and can generate co-aligned FITS cubes to make three-color RGB images. It also offers different overlay capabilities, including contour sets, markers with customizable symbols, and coordinate grids, and a range of other useful features.
CUBEP3M is a high performance cosmological N-body code which has many utilities and extensions, including a runtime halo finder, a non-Gaussian initial conditions generator, a tuneable accuracy, and a system of unique particle identification. CUBEP3M is fast, has a memory imprint up to three times lower than other widely used N-body codes, and has been run on up to 20,000 cores, achieving close to ideal weak scaling even at this problem size. It is well suited and has already been used for a broad number of science applications that require either large samples of non-linear realizations or very large dark matter N-body simulations, including cosmological reionization, baryonic acoustic oscillations, weak lensing or non-Gaussian statistics.
These IDL routines provide a robust and relatively fast way to perform least-squares curve and surface fitting. The algorithms are translated from MINPACK-1, which is a rugged minimization routine found on Netlib, and distributed with permission. This algorithm is more desirable than CURVEFIT because it is generally more stable and less likely to crash than the brute-force approach taken by CURVEFIT, which is based upon Numerical Recipes.
ParselTongue is a Python interface to classic AIPS, Obit and possibly other task-based data reduction packages. It serves as the software infrastructure for some of the ALBUS implementation. It allows you to run AIPS tasks, and access AIPS headers and extension tables from Python. There is also support for running Obit tasks and accessing data in FITS files. Full access to the visibilities in AIPS UV data is also available.
EzGal is a flexible Python program which generates observable parameters (magnitudes, colors, and mass-to-light ratios) for arbitrary input stellar population synthesis (SPS) models; it enables simple, direct comparison of different model sets so that the uncertainty introduced by choice of model set can be quantified. EzGal is also capable of generating composite stellar population models (CSPs) for arbitrary input star-formation histories and reddening laws, and can be used to interpolate between metallicities for a given model set.
Bayesian Blocks is a time-domain algorithm for detecting localized structures (bursts), revealing pulse shapes within bursts, and generally characterizing intensity variations. The input is raw time series data, in almost any form. Three data modes are elaborated: (1) time-tagged events, (2) binned counts, and (3) measurements at arbitrary times with normal errors. The output is the most probable segmentation of the observation interval into sub-intervals during which the signal is perceptibly constant, i.e. has no statistically significant variations. The idea is not that the source is deemed to actually have this discontinuous, piecewise constant form, rather that such an approximate and generic model is often useful. Treatment of data gaps, variable exposure, extension to piecewise linear and piecewise exponential representations, multi-variate time series data, analysis of variance, data on the circle, other data modes, and dispersed data are included.
This implementation is exact and replaces the greedy, approximate, and outdated algorithm implemented in BLOCK.
Would you like to view a random code?
