Automated Radio Telescope Image Processing Pipeline (ARTIP)

Discussion topics for individual codes
Post Reply
Ada Coda
ASCL Robot
Posts: 1531
Joined: Thu May 08, 2014 5:37 am

ARTIP: Automated Radio Telescope Image Processing Pipeline

Post by Ada Coda » Sun Feb 11, 2018 11:46 am

ARTIP: Automated Radio Telescope Image Processing Pipeline

Abstract: The Automated Radio Telescope Image Processing Pipeline (ARTIP) automates the entire process of flagging, calibrating, and imaging for radio-interferometric data. ARTIP starts with raw data, i.e. a measurement set and goes through multiple stages, such as flux calibration, bandpass calibration, phase calibration, and imaging to generate continuum and spectral line images. Each stage can also be run independently. The pipeline provides continuous feedback to the user through various messages, charts and logs. It is written using standard python libraries and the CASA package. The pipeline can deal with datasets with multiple spectral windows and also multiple target sources which may have arbitrary combinations of flux/bandpass/phase calibrators.

Credit: Sharma, Ravi; Gyanchandani, Dolly; Kulkarni, Sarang; Gupta, Neeraj; Pathak, Vineet; Pande, Arti; Joshi, Unmesh

Site: https://github.com/RTIP/artip
https://ui.adsabs.harvard.edu/abs/2018MNRAS.476.2432G

Bibcode: 2018ascl.soft02004S

Preferred citation method: Please acknowledge with the following phrase: This paper makes use of ARTIP - the Automated Radio Telescope Imaging Pipeline developed by IUCAA (http://www.iucaa.in/) and ThoughtWorks (https://www.thoughtworks.com/)

ID: ascl:1802.004
Last edited by Ada Coda on Sun Aug 04, 2019 6:59 am, edited 1 time in total.
Reason: Updated code entry.

Post Reply