[ascl:9903.001]
LENSKY: Galactic Microlensing Probability

Given a model for the Galaxy, this program computes the microlensing rate in any direction. Program features include the ability to include the brightness of the lens and to compute the probability of lens detection at any level of lensing amplification. The program limits itself to lensing by single stars of single sources. The program is currently setup to accept input from the Galactic models of Bahcall and Soniera (1982, 1986).

There are three files needed for LENSKY, the Fortran file lensky.for and two input files: galmod.dsk (15 Megs) and galmod.sph (22 Megs). The zip file available below contains all three files. The program generates output to the file lensky.out. The program is pretty self-explanatory past that.

[ascl:9904.001]
BSGMODEL: The Bahcall-Soneira Galaxy Model

BSGMODEL is used to construct the disk and spheroid components of the Galaxy from which the distribution of visible stars and mass in the Galaxy is calculated. The computer files accessible here are available for export use. The modifications are described in comment lines in the software. The Galaxy model software has been installed and used by different people for a large variety of purposes (see, e. g., the the review "Star Counts and Galactic Structure'', Ann. Rev. Astron. Ap. 24, 577, 1986 ).

[ascl:9905.001]
CONSKY: A Sky CCD Integration Simulation

This program addresses the question of what resources are needed to produce a continuous data record of the entire sky down to a given limiting visual magnitude. Toward this end, the program simulates a small camera/telescope or group of small camera/telescopes collecting light from a large portion of the sky. From a given stellar density derived from a Bahcall - Soneira Galaxy model, the program first converts star densities at visual magnitudes between 5 and 20 to number of sky pixels needed to monitor each star simultaneously. From pixels, the program converts input CCD parameters to needed telescope attributes, needed data storage space, and the length of time needed to accumulate data of photometric quality for stars of each limiting visual magnitude over the whole sky. The program steps though photometric integrations one second at a time and includes the contribution from a bright background, read noise, dark current, and atmospheric absorption.

[ascl:9905.002]
ICOSAHEDRON: A package for pixelizing the sphere

What is the best way to pixelize a sphere? This question occurs in many practical applications, for instance when making maps (of the earth or the celestial sphere) and when doing numerical integrals over the sphere. This package consists of source code and documentation for a method which involves inscribing the sphere in a regular icosahedron and then equalizing the pixel areas.

[ascl:9906.001]
SLOPES: Least-squares linear regression lines for bivariate datasets

SLOPES computes six least-squares linear regression lines for bivariate datasets of the form (x_i,y_i) with unknown population distributions. Measurement errors, censoring (nondetections) or other complications are not treated. The lines are: the ordinary least-squares regression of y on x, OLS(Y|X); the inverse regression of x on y, OLS(X_Y); the angular bisector of the OLS lines; the orthogonal regression line; the reduced major axis, and the mean-OLS line. The latter four regressions treat the variables symmetrically, while the first two regressions are asymmetrical. Uncertainties for the regression coefficients of each method are estimated via asymptotic formulae, bootstrap resampling, and bivariate normal simulation. These methods, derivation of the regression coefficient uncertainties, and discussions of their use are provided in three papers listed below. The user is encouraged to read and reference these studies.

[ascl:9906.002]
EXTINCT: A computerized model of large-scale visual interstellar extinction

The program EXTINCT.FOR is a FORTRAN subroutine summarizing a three-dimensional visual Galactic extinction model, based on a number of published studies. INPUTS: Galactic latitude (degrees), Galactic longitude (degrees), and source distance (kpc). OUTPUTS (magnitudes): Extinction, extinction error, a statistical correction term, and an array containing extinction and extinction error from each subroutine. The model is useful for correcting visual magnitudes of Galactic sources (particularly in statistical models), and has been used to find Galactic extinction of extragalactic sources. The model's limited angular resolution (subroutine-dependent, but with a minimum resolution of roughly 2 degrees) is necessitated by its ability to describe three-dimensional structure.

[ascl:9909.001]
PMCode: Particle-Mesh Code for Cosmological Simulations

Particle-Mesh (PM) codes are still very useful tools for testing predictions of cosmological models in cases when extra high resolution is not very important. We release for public use a cosmological PM N-body code. The code is very fast and simple. We provide a complete package of routines needed to set initial conditions, to run the code, and to analyze the results. The package allows you to simulate models with numerous combinations of parameters: open/flat/closed background, with or without the cosmological constant, different values of the Hubble constant, with or without hot neutrinos, tilted or non-tilted initial spectra, different amount of baryons.

[ascl:9909.002]
ANGSIZ: A general and practical method for calculating cosmological distances

The calculation of distances is of fundamental importance in extragalactic astronomy and cosmology. However, no practical implementation for the general case has previously been available. We derive a second-order differential equation for the angular size distance valid not only in all homogeneous Friedmann-Lemaitre cosmological models, parametrised by $lambda_{0}$ and $Omega_{0}$, but also in inhomogeneous 'on-average' Friedmann-Lemaitre models, where the inhomogeneity is given by the (in the general case redshift-dependent) parameter $eta$. Since most other distances can be obtained trivially from the angular size distance, and since the differential equation can be efficiently solved numerically, this offers for the first time a practical method for calculating distances in a large class of cosmological models. We also briefly discuss our numerical implementation, which is publicly available.

[ascl:9909.003]
ISIS: A method for optimal image subtraction

ISIS is a complete package to process CCD images using the image Optimal subtraction method (Alard & Lupton 1998, Alard 1999). The ISIS package can find the best kernel solution even in case of kernel variations as a function of position in the image. The relevant computing time is minimal in this case and is only slightly different from finding constant kernel solutions. ISIS includes as well a number of facilities to compute the light curves of variables objects from the subtracted images. The basic routines required to build the reference frame and make the image registration are also provided in the package.

[ascl:9909.004]
CMBFAST: A microwave anisotropy code

CMBFAST is the most extensively used code for computing cosmic microwave background anisotropy, polarization and matter power spectra. This package contains cosmological linear perturbation theory code to compute the evolution of various cosmological matter and radiation components, both today and at high redshift. The code has been tested over a wide range of cosmological parameters.

This code is no longer supported; please investigate using CAMB (ascl:1102.026) instead.

[ascl:9909.005]
BLOCK: A Bayesian block method to analyze structure in photon counting data

Bayesian Blocks is a time-domain algorithm for detecting localized structures (bursts), revealing pulse shapes, and generally characterizing intensity variations. The input is raw counting data, in any of three forms: time-tagged photon events, binned counts, or time-to-spill data. The output is the most probable segmentation of the observation into time intervals during which the photon arrival rate is perceptibly constant, i.e. has no statistically significant variations. The idea is not that the source is deemed to have this discontinuous, piecewise constant form, rather that such an approximate and generic model is often useful. The analysis is based on Bayesian statistics.

This code is obsolete and yields approximate results; see Bayesian Blocks instead for an algorithm guaranteeing exact global optimization.

[ascl:9910.001]
Cloudy: Numerical simulation of plasmas and their spectra

Ferland, Gary; van Hoof, Peter; Verner, Dima; Verner, Katya; Ferguson, Jason; Hamann, Fred; Kingdon, Jim; Korista, Kirk; Shields, Joe

Cloudy is a large-scale spectral synthesis code designed to simulate fully physical conditions within an astronomical plasma and then predict the emitted spectrum. The code is freely available and is widely used in the analysis and interpretation of emission-line spectra.

[ascl:9910.002]
SPECTRUM: A stellar spectral synthesis program

SPECTRUM ((C) Richard O. Gray, 1992-2008) is a stellar spectral synthesis program which runs on a number of platforms, including most flavors of UNIX and LINUX. It will also run under Windwos 9x/ME/NT/2000/XP using the Cygwin tools or the distributed Windows binaries. The code for SPECTRUM has been written in the "C" language. SPECTRUM computes the LTE synthetic spectrum given a stellar atmosphere model. SPECTRUM can use as input the fully blanketed stellar atmosphere models of Robert Kurucz including the new models of Castelli and Kurucz, but any other stellar atmosphere model which can be cast into the format of Kurucz's models can be used as well. SPECTRUM can be programmed with "command-line switches" to give a number of different outputs. In the default mode, SPECTRUM computes the stellar-disk-integrated normalized-intensity spectrum, but in addition, SPECTRUM will compute the absolute monochromatic flux from the stellar atmosphere or the specific intensity from any point on the stellar surface.

[ascl:9910.003]
FASTELL: Fast calculation of a family of elliptical mass gravitational lens models

Because of their simplicity, axisymmetric mass distributions are often used to model gravitational lenses. Since galaxies are usually observed to have elliptical light distributions, mass distributions with elliptical density contours offer more general and realistic lens models. They are difficult to use, however, since previous studies have shown that the deflection angle (and magnification) in this case can only be obtained by rather expensive numerical integrations. We present a family of lens models for which the deflection can be calculated to high relative accuracy (10-5) with a greatly reduced numerical effort, for small and large ellipticity alike. This makes it easier to use these distributions for modeling individual lenses as well as for applications requiring larger computing times, such as statistical lensing studies. FASTELL is a code to calculate quickly and accurately the lensing deflection and magnification matrix for the softened power-law elliptical mass distribution (SPEMD) lens galaxy model. The SPEMD consists of a softened power-law radial distribution with elliptical isodensity contours.

[ascl:9910.004]
COSMICS: Cosmological initial conditions and microwave anisotropy codes

COSMICS is a package of Fortran programs useful for computing transfer functions and microwave background anisotropy for cosmological models, and for generating gaussian random initial conditions for nonlinear structure formation simulations of such models. Four programs are provided: linger_con and linger_syn integrate the linearized equations of general relativity, matter, and radiation in conformal Newtonian and synchronous gauge, respectively; deltat integrates the photon transfer functions computed by the linger codes to produce photon anisotropy power spectra; and grafic tabulates normalized matter power spectra and produces constrained or unconstrained samples of the matter density field.

[ascl:9910.005]
XSPEC: An X-ray spectral fitting package

It has been over a decade since the first paper was published containing results determined using the general X-ray spectral-fitting program XSPEC. Since then XSPEC has become the most widely used program for this purpose, being the de facto standard for the ROSAT and the de jure standard for the ASCA and XTE satellites. Probably the most important features of XSPEC are the large number of theoretical models available and the facilities for adding new models.

[ascl:9910.006]
BHSKY: Visual distortions near a black hole

BHSKY (copyright 1999 by Robert J. Nemiroff) computes the visual distortion effects visible to an observer traveling around and descending near a non-rotating black hole. The codes are general relativistically accurate and incorporate concepts such as large-angle deflections, image magnifications, multiple imaging, blue-shifting, and the location of the photon sphere. Once star.dat is edited to define the position and orientation of the observer relative to the black hole, bhsky_table should be run to create a table of photon deflection angles. Next bhsky_image reads this table and recomputes the perceived positions of stars in star.num, the Yale Bright Star Catalog. Lastly, bhsky_camera plots these results. The code currently tracks only the two brightest images of each star, and hence becomes noticeably incomplete within 1.1 times the Schwarzschild radius.

[ascl:9910.007]
WINGSPAN: A WINdows Gamma-ray SPectral Analysis program

WINGSPAN is a program written to analyze spectral data from the Burst and Transient Source Experiment (BATSE) on NASA's Compton Gamma-Ray Observatory. Data files in the FITS (BFITS) format are suitable for input into the program. WINGSPAN can be used to view and manipulate event time histories or count spectra, and also has the capability to perform spectral deconvolution via a standard forward folding model fitting technique (Levenberg-Marquardt algorithm). Although WINGSPAN provides many functions for data manipulation, the program was designed to allow users to easily plug in their own external IDL routines. These external routines have access to all data read from the FITS files, as well as selection intervals created in the main part of WINGSPAN (background intervals and model, etc).

[ascl:9910.008]
XSTAR: A program for calculating conditions and spectra of photoionized gases

XSTAR is a command-driven, interactive, computer program for calculating the physical conditions and emission spectra of photoionized gases. It may be applied in a wide variety of astrophysical contexts. Stripped to essentials, its job may be described simply: A spherical gas shell surrounding a central source of ionizing radiation absorbs some of this radiation and reradiates it in other portions of the spectrum; XSTAR computes the effects on the gas of absorbing this energy, and the spectrum of reradiated light. The user supplies the shape and strength of the incident continuum, the elemental abundances in the gas, its density or pressure, and its thickness; the code can be directed to return any of a large number of derived quantities, including (but not limited to) the ionization balance and temperature, opacity tables, and emitted line and continuum fluxes.

[ascl:9910.009]
RADPACK: A RADical compression analysis PACKage for fitting to the CMB

The RADPACK package, written in IDL, contains both data and software. The data are the constraints on the cosmic microwave background (CMB) angular power spectrum from all published data as of 9/99. A unique aspect of this compilation is that the non-Gaussianity of the uncertainties has been characterized. The most important program in the package, written in the IDL language, is called chisq.pro and calculates $chi^2$, for an input power spectrum, according to the offset log-normal form of Bond, Jaffe and Knox (astro-ph/9808264). chisq.pro also outputs files that are useful for examining the residuals (the difference between the predictions of the model and the data). There is an sm macro for plotting up the residuals, and a histogram of the residuals. The histogram is actually for the 'whitenend' residuals ---a linear combination of the residuals which leaves them uncorrelated and with unit variance. The expectation is that the whitened residuals will be distributed as a Gaussian with unit variance.

[ascl:9911.001]
DUSTY: Radiation transport in a dusty environment

DUSTY solves the problem of radiation transport in a dusty environment. The code can handle both spherical and planar geometries. The user specifies the properties of the radiation source and dusty region, and the code calculates the dust temperature distribution and the radiation field in it. The solution method is based on a self-consistent equation for the radiative energy density, including dust scattering, absorption and emission, and does not introduce any approximations. The solution is exact to within the specified numerical accuracy. DUSTY has built in optical properties for the most common types of astronomical dust and comes with a library for many other grains. It supports various analytical forms for the density distribution, and can perform a full dynamical calculation for radiatively driven winds around AGB stars. The spectral energy distribution of the source can be specified analytically as either Planckian or broken power-law. In addition, arbitrary dust optical properties, density distributions and external radiation can be entered in user supplied files. Furthermore, the wavelength grid can be modified to accommodate spectral features. A single DUSTY run can process an unlimited number of models, with each input set producing a run of optical depths, as specified. The user controls the detail level of the output, which can include both spectral and imaging properties as well as other quantities of interest.

[ascl:9911.002]
IRAF: Image Reduction and Analysis Facility

IRAF includes a broad selection of programs for general image processing and graphics, plus a large number of programs for the reduction and analysis of optical and IR astronomy data. Other external or layered packages are available for applications such as data acquisition or handling data from other observatories and wavelength regimes such as the Hubble Space Telescope (optical), EUVE (extreme ultra-violet), or ROSAT and AXAF (X-ray). These external packages are distributed separately from the main IRAF distribution but can be easily installed. The IRAF system also includes a complete programming environment for scientific applications, which includes a programmable Command Language scripting facility, the IMFORT Fortran/C programming interface, and the full SPP/VOS programming environment in which the portable IRAF system and all applications are written.

[ascl:9911.003]
AIPS: Astronomical Image Processing System

AIPS ("Classic") is a software package for interactive and batch calibration and editing of astronomical data, typically radio interferometric data. AIPS can be used for the calibration, construction, enhancement, display, and analysis of astronomical images made from data using Fourier synthesis methods. Design and development of the package begin in 1978. AIPS presently consists of over 1,000,000 lines of code and 400,000 lines of documentation, representing over 65 person-years of effort.

[ascl:9911.004]
CHIANTI: A database for astrophysical emission line spectroscopy

CHIANTI consists of a critically evaluated set of atomic data necessary to calculate the emission line spectrum of astrophysical plasmas. The data consists of atomic energy levels, atomic radiative data such as wavelengths, weighted oscillator strengths and A values, and electron collisional excitation rates. A set of programs that use these data to calculate the spectrum in a desired wavelength range as a function of temperature and density are also provided. These programs have been written in Interactive Data Language (IDL) and descriptions of these various programs are provided on the website.

[ascl:9912.001]
SPH_1D: Hierarchical gravity/SPH treecode for simulations of interacting galaxies

We describe a fast tree algorithm for gravitational N-body simulation on SIMD parallel computers. The tree construction uses fast, parallel sorts. The sorted lists are recursively divided along their x, y and z coordinates. This data structure is a completely balanced tree (i.e., each particle is paired with exactly one other particle) and maintains good spatial locality. An implementation of this tree-building algorithm on a 16k processor Maspar MP-1 performs well and constitutes only a small fraction (approximately 15%) of the entire cycle of finding the accelerations. Each node in the tree is treated as a monopole. The tree search and the summation of accelerations also perform well. During the tree search, node data that is needed from another processor is simply fetched. Roughly 55% of the tree search time is spent in communications between processors. We apply the code to two problems of astrophysical interest. The first is a simulation of the close passage of two gravitationally, interacting, disk galaxies using 65,636 particles. We also simulate the formation of structure in an expanding, model universe using 1,048,576 particles. Our code attains speeds comparable to one head of a Cray Y-MP, so single instruction, multiple data (SIMD) type computers can be used for these simulations. The cost/performance ratio for SIMD machines like the Maspar MP-1 make them an extremely attractive alternative to either vector processors or large multiple instruction, multiple data (MIMD) type parallel computers. With further optimizations (e.g., more careful load balancing), speeds in excess of today's vector processing computers should be possible.

[ascl:9912.002]
FTOOLS: A general package of software to manipulate FITS files

FTOOLS, a highly modular collection of utilities for processing and analyzing data in the FITS (Flexible Image Transport System) format, has been developed in support of the HEASARC (High Energy Astrophysics Research Archive Center) at NASA's Goddard Space Flight Center. The FTOOLS package contains many utility programs which perform modular tasks on any FITS image or table, as well as higher-level analysis programs designed specifically for data from current and past high energy astrophysics missions. The utility programs for FITS tables are especially rich and powerful, and provide functions for presentation of file contents, extraction of specific rows or columns, appending or merging tables, binning values in a column or selecting subsets of rows based on a boolean expression. Individual FTOOLS programs can easily be chained together in scripts to achieve more complex operations such as the generation and displaying of spectra or light curves. FTOOLS development began in 1991 and has produced the main set of data analysis software for the current ASCA and RXTE space missions and for other archival sets of X-ray and gamma-ray data. The FTOOLS software package is supported on most UNIX platforms and on Windows machines. The user interface is controlled by standard parameter files that are very similar to those used by IRAF. The package is self documenting through a stand alone help task called fhelp. Software is written in ANSI C and FORTRAN to provide portability across most computer systems. The data format dependencies between hardware platforms are isolated through the FITSIO library package.

[ascl:9912.003]
RVSAO 2.0: Digital Redshifts and Radial Velocities

RVSAO is a set of programs to obtain redshifts and radial velocities from digital spectra. RVSAO operates in the IRAF (Tody 1986, 1993) environment. The heart of the system is xcsao, which implements the cross-correlation method, and is a direct descendant of the system built by Tonry and Davis (1979). emsao uses intelligent heuristics to search for emission lines in spectra, then fits them to obtain a redshift. sumspec shifts and sums spectra to build templates for cross-correlation. linespec builds synthetic spectra given a list of spectral lines. bcvcorr corrects velocities for the motion of the earth. We discuss in detail the parameters necessary to run xcsao and emsao properly. We discuss the reliability and error associated with xcsao derived redshifts. We develop an internal error estimator, and we show how large, stable surveys can be used to develop more accurate error estimators. We develop a new methodology for building spectral templates for galaxy redshifts. We show how to obtain correlation velocities using emission line templates. Emission line correlations are substantially more efficient than the previous standard technique, automated emission line fitting. We compare the use of RVSAO with new methods, which use Singular Value Decomposition and $chi^2$ fitting techniques.

[ascl:0003.001]
GADGET-2: A Code for Cosmological Simulations of Structure Formation

The cosmological simulation code GADGET-2, a new massively parallel TreeSPH code, is capable of following a collisionless fluid with the N-body method, and an ideal gas by means of smoothed particle hydrodynamics (SPH). The implementation of SPH manifestly conserves energy and entropy in regions free of dissipation, while allowing for fully adaptive smoothing lengths. Gravitational forces are computed with a hierarchical multipole expansion, which can optionally be applied in the form of a TreePM algorithm, where only short-range forces are computed with the `tree'-method while long-range forces are determined with Fourier techniques. Time integration is based on a quasi-symplectic scheme where long-range and short-range forces can be integrated with different timesteps. Individual and adaptive short-range timesteps may also be employed. The domain decomposition used in the parallelisation algorithm is based on a space-filling curve, resulting in high flexibility and tree force errors that do not depend on the way the domains are cut. The code is efficient in terms of memory consumption and required communication bandwidth. It has been used to compute the first cosmological N-body simulation with more than 10^10 dark matter particles, reaching a homogeneous spatial dynamic range of 10^5 per dimension in a 3D box. It has also been used to carry out very large cosmological SPH simulations that account for radiative cooling and star formation, reaching total particle numbers of more than 250 million. GADGET-2 is publicly released to the research community.

[ascl:0003.002]
SAOImage DS9: A utility for displaying astronomical images in the X11 window environment

SAOImage DS9 is an astronomical imaging and data visualization application. DS9 supports FITS images and binary tables, multiple frame buffers, region manipulation, and many scale algorithms and colormaps. It provides for easy communication with external analysis tasks and is highly configurable and extensible via XPA and SAMP. DS9 is a stand-alone application. It requires no installation or support files. Versions of DS9 currently exist for Solaris, Linux, MacOSX, and Windows. All versions and platforms support a consistent set of GUI and functional capabilities. DS9 supports advanced features such as multiple frame buffers, mosaic images, tiling, blinking, geometric markers, colormap manipulation, scaling, arbitrary zoom, rotation, pan, and a variety of coordinate systems. DS9 also supports FTP and HTTP access. The GUI for DS9 is user configurable. GUI elements such as the coordinate display, panner, magnifier, horizontal and vertical graphs, button bar, and colorbar can be configured via menus or the command line. DS9 is a Tk/Tcl application which utilizes the SAOTk widget set. It also incorporates the X Public Access (XPA) mechanism to allow external processes to access and control its data, GUI functions, and algorithms.

[ascl:0008.001]
DDSCAT: The discrete dipole approximation for scattering and absorption of light by irregular particles

DDSCAT is a freely available software package which applies the "discrete dipole approximation" (DDA) to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. The DDA approximates the target by an array of polarizable points. DDSCAT.5a requires that these polarizable points be located on a cubic lattice. DDSCAT allows accurate calculations of electromagnetic scattering from targets with "size parameters" 2 pi a/lambda < 15 provided the refractive index m is not large compared to unity (|m-1| < 1). The DDSCAT package is written in Fortran and is highly portable. The program supports calculations for a variety of target geometries (e.g., ellipsoids, regular tetrahedra, rectangular solids, finite cylinders, hexagonal prisms, etc.). Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to import arbitrary target geometries into the code, and relatively straightforward to add new target generation capability to the package. DDSCAT automatically calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix for specified orientation of the target relative to the incident wave, and for specified scattering directions. This User Guide explains how to use DDSCAT to carry out EM scattering calculations. CPU and memory requirements are described.

[ascl:0008.002]
RATRAN: Radiative Transfer and Molecular Excitation in One and Two Dimensions

RATRAN is a numerical method and computer code to calculate the radiative transfer and excitation of molecular lines. The approach is based on the Monte Carlo method, and incorporates elements from Accelerated Lambda Iteration. It combines the flexibility of the former with the speed and accuracy of the latter. Convergence problems known to plague Monte Carlo methods at large optical depth (>100) are avoided by separating local contributions to the radiation field from the overall transfer problem. The random nature of the Monte Carlo method serves to verify the independence of the solution to the angular, spatial, and frequency sampling of the radiation field. This allows the method to be used in a wide variety of astrophysical problems without specific adaptations. Moreover, the code can be applied to all atoms or molecules for which collisional rate coefficients are available and any axially symmetric source model. Continuum emission and absorption by dust is explicitly taken into account but scattering is neglected. We expect this program to be an important tool in analyzing data from present and future infrared and (sub-)millimeter telescopes.

[ascl:0011.001]
StarFinder: A code for stellar field analysis

Diolaiti, Emiliano; Bendinelli, Orazio; Bonaccini, Domenico; Close, Laird M.; Currie, Doug G.; Parmeggiani, Gianluigi

StarFinder is an IDL code for the deep analysis of stellar fields, designed for Adaptive Optics well-sampled images with high and low Strehl ratio. The Point Spread Function is extracted directly from the frame, to take into account the actual structure of the instrumental response and the atmospheric effects. The code is written in IDL language and organized in the form of a self-contained widget-based application, provided with a series of tools for data visualization and analysis. A description of the method and some applications to Adaptive Optics data are presented.

[ascl:0101.001]
MILLISEARCH: A Search for Millilensing in BATSE GRB Data

The millisearch.for code was used to generate a new search for the gravitational lens effects of a significant cosmological density of supermassive compact objects (SCOs) on gamma-ray bursts. No signal attributable to millilensing was found. We inspected the timing data of 774 BATSE-triggered GRBs for evidence of millilensing: repeated peaks similar in light-curve shape and spectra. Our null detection leads us to conclude that, in all candidate universes simulated, Omega_{SCO} < 0.1 is favored for 10^{5} < M_{SCO}/M_{odot} < 10^{9}, while in some universes and mass ranges the density limits are as much as 10 times lower. Therefore, a cosmologically significant population of SCOs near globular cluster mass neither came out of the primordial universe, nor condensed at recombination.

[ascl:0104.001]
MLAPM: Simulating Structure Formation from Collisionless Matter

MLAPM simulates structure formation from collisionless matter. The code, written in C, is purely grid-based and uses a recursively refined Cartesian grid to solve Poisson's equation for the potential, rather than obtaining the potential from a Green's function. Refinements can have arbitrary shapes and in practice closely follow the complex morphology of the density field that evolves. The timestep shortens by a factor two with each successive refinement. It is argued that an appropriate choice of softening length is of great importance and that the softening should be at all points an appropriate multiple of the local inter-particle separation. Unlike tree and P3M codes, multigrid codes automatically satisfy this requirement.

[ascl:0104.002]
CSENV: A code for the chemistry of CircumStellar ENVelopes

CSENV is a code that computes the chemical abundances for a desired set of species as a function of radius in a stationary, non-clumpy, CircumStellar ENVelope. The chemical species can be atoms, molecules, ions, radicals, molecular ions, and/or their specific quantum states. Collisional ionization or excitation can be incorporated through the proper chemical channels. The chemical species interact with one another and can are subject to photo-processes (dissociation of molecules, radicals, and molecular ions as well as ionization of all species). Cosmic ray ionization can be included. Chemical reaction rates are specified with possible activation temperatures and additional power-law dependences. Photo-absorption cross-sections vs. wavelength, with appropriate thresholds, can be specified for each species, while for H2+ a photoabsorption cross-section is provided as a function of wavelength and temperature. The photons originate from both the star and the external interstellar medium. The chemical species are shielded from the photons by circumstellar dust, by other species and by themselves (self-shielding). Shielding of continuum-absorbing species by these species (self and mutual shielding), line-absorbing species, and dust varies with radial optical depth. The envelope is spherical by default, but can be made bipolar with an opening solid-angle that varies with radius. In the non-spherical case, no provision is made for photons penetrating the envelope from the sides. The envelope is subject to a radial outflow (or wind), constant velocity by default, but the wind velocity can be made to vary with radius. The temperature of the envelope is specified (and thus not computed self-consistently).

[ascl:0202.001]
PopRatio: A program to calculate atomic level populations in astrophysical plasmas

PopRatio is a Fortran 90 code to calculate atomic level populations in astrophysical plasmas. The program solves the equations of statistical equilibrium considering all possible bound-bound processes: spontaneous, collisional or radiation induced (the later either directly or by fluorescence). There is no limit on the number of levels or in the number of processes that may be taken into account. The program may find a wide range of applicability in astronomical problems, such as interpreting fine-structure absorption lines or collisionally excited emission lines and also in calculating the cooling rates due to collisional excitation.

[ascl:1004.001]
GIM2D: Galaxy IMage 2D

GIM2D (Galaxy IMage 2D) is an IRAF/SPP package written to perform detailed bulge/disk decompositions of low signal-to-noise images of distant galaxies in a fully automated way. GIM2D takes an input image from HST or ground-based telescopes and outputs a galaxy-subtracted image as well as a catalog of structural parameters.

[ascl:1007.001]
PINTofALE: Package for Interactive Analysis of Line Emission

PINTofALE was originally developed to analyze spectroscopic data from optically-thin coronal plasmas, though much of the software is sufficiently general to be of use in a much wider range of astrophysical data analyses. It is based on a modular set of IDL tools that interact with an atomic database and with observational data. The tools are designed to allow easy identification of spectral features, measure line fluxes, and carry out detailed modeling. The basic philosophy of the package is to provide access to the innards of atomic line databases, and to have flexible tools to interactively compare with the observed data. It is motivated by the large amount of book-keeping, computation and iterative interaction that is required between the researcher and observational and theoretical data in order to derive astrophysical results. The tools link together transparently and automatically the processes of spectral "browsing", feature identification, measurement, and computation and derivation of results. Unlike standard modeling and fitting engines currently in use, PINTofALE opens up the "black box" of atomic data required for UV/X-ray analyses and allows the user full control over the data that are used in any given analysis.

[ascl:1007.002]
INFALL: A code for calculating the mean initial and final density profiles around a virialized dark matter halo

Infall is a code for calculating the mean initial and final density profiles around a virialized dark matter halo. The initial profile is derived from the statistics of the initial Gaussian random field, accounting for the problem of peaks within peaks using the extended Press-Schechter model. Spherical collapse then yields the typical density and velocity profiles of the gas and dark matter that surrounds the final, virialized halo. In additional to the mean profile, ±1-σ profiles are calculated and can be used as an estimate of the scatter.

[ascl:1007.003]
GEMINI: A toolkit for analytical models of two-point correlations and inhomogeneous structure formation

Gemini is a toolkit for analytical models of two-point correlations and inhomogeneous structure formation. It extends standard Press-Schechter theory to inhomogeneous situations, allowing a realistic, analytical calculation of halo correlations and bias.

[ascl:1007.004]
CMBEASY: An object-oriented code for the cosmic microwave background

CMBEASY is a software package for calculating the evolution of density fluctuations in the universe. Most notably, the Cosmic Microwave Background temperature anisotropies. It features a Markov Chain Monte Carlo driver and many routines to compute likelihoods of any given model. It is based on the CMBFAST package by Uros Seljak and Matias Zaldarriaga.

[ascl:1007.005]
Arcetri Spectral Code for Thin Plasmas

The Arcetri spectral code allows to evaluate the spectrum of the radiation emitted by hot and optically thin plasmas in the spectral range 1 - 2000 Angstroms. The database has been updated including atomic data and radiative and collisional rates to calculate level population and line emissivities for a number of ions of the minor elements; a critical compilation of the electron collision excitation for these elements has been performed. The present version of the program includes the CHIANTI database for the most abundant elements, the minor elements data, and Fe III atomic model, radiative and collisional data.

[ascl:1007.006]
AMIGA: Adaptive Mesh Investigations of Galaxy Assembly

AMIGA is a publicly available adaptive mesh refinement code for (dissipationless) cosmological simulations. It combines an N-body code with an Eulerian grid-based solver for the full set of magnetohydrodynamics (MHD) equations in order to conduct simulations of dark matter, baryons and magnetic fields in a self-consistent way in a fully cosmological setting. Our numerical scheme includes effective methods to ensure proper capturing of shocks and highly supersonic flows and a divergence-free magnetic field. The high accuracy of the code is demonstrated by a number of numerical tests.

[ascl:1010.001]
CFITSIO: A FITS File Subroutine Library

CFITSIO is a library of C and Fortran subroutines for reading and writing data files in FITS (Flexible Image Transport System) data format. CFITSIO provides simple high-level routines for reading and writing FITS files that insulate the programmer from the internal complexities of the FITS format. CFITSIO also provides many advanced features for manipulating and filtering the information in FITS files.

[ascl:1010.002]
fpack: FITS Image Compression Program

fpack is a utility program for optimally compressing images in the FITS data format. The associated funpack program will restore the compressed file back to its original state. These programs may be run from the host operating system command line and are analogous to the gzip and gunzip utility programs, except that they are specifically optimized for FITS format images and offer a wider choice of compression options.

fpack uses the tiled image compression convention for storing the compressed images. This convention can in principle support any number of of different compression algorithms; currently GZIP, Rice, Hcompress, and the IRAF pixel list compression algorithms have been implemented.

The main advantages of fpack compared to the commonly used technique of externally compressing the whole FITS file with gzip are:

- It is generally faster and offers better compression than gzip.
- The FITS header keywords remain uncompressed for fast access.
- Each HDU of a multi-extension FITS file is compressed separately, so it is not necessary to uncompress the entire file to read a single image in a multi-extension file.
- Dividing the image into tiles before compression enables faster access to small subsections of the image.
- The compressed image is itself a valid FITS file and can be manipulated by other general FITS utility software.
- Lossy compression can be used for much higher compression in cases where it is not necessary to exactly preserve the original image.
- The CHECKSUM keywords are automatically updated to help verify the integrity of the files.
- Software that supports the tiled image compression technique can directly read and write the FITS images in their compressed form.

[ascl:1010.003]
AMBER: Data Reduction Software

Malbet, Fabien; Duvert, Gilles; Millour, Florentin; Le Bouquin, Jean-Baptiste; Mella, Guillaume; Halipré, Luc; Chelli, Alain; Lafrasse, Sylvain; Altariba, Evelyne; Zins, Gérard

AMBER data reduction software has an optional graphic interface in a high level language, allowing the user to control the data reduction step by step or in a completely automatic manner. The software has a robust calibration scheme that make use of the full calibration sets available during the night. The output products are standard OI-FITS files, which can be used directly in high level software like model fitting or image reconstruction tools.

[ascl:1010.004]
Needatool: A Needlet Analysis Tool for Cosmological Data Processing

NeedATool (Needlet Analysis Tool) performs data analysis based on needlets, a wavelet rendition powerful for the analysis of fields defined on a sphere. Needlets have been applied successfully to the treatment of astrophysical and cosmological observations, particularly to the analysis of cosmic microwave background (CMB) data. Wavelets have emerged as a useful tool for CMB data analysis, as they combine most of the advantages of both pixel space, where it is easier to deal with partial sky coverage and experimental noise, and the harmonic domain, in which beam treatment and comparison with theoretical predictions are more effective due in large part to their sharp localization.

[ascl:1010.005]
Particle module of Piernik MHD code

Piernik is a multi-fluid grid magnetohydrodynamic (MHD) code based on the Relaxing Total Variation Diminishing (RTVD) conservative scheme. The original code has been extended by addition of dust described within the particle approximation. The dust is now described as a system of interacting particles. The particles can interact with gas, which is described as a fluid. The comparison between the test problem results and the results coming from fluid simulations made with Piernik code shows the most important differences between fluid and particle approximations used to describe dynamical evolution of dust under astrophysical conditions.

[ascl:1010.006]
DSPSR: Digital Signal Processing Software for Pulsar Astronomy

DSPSR, written primarily in C++, is an open-source, object-oriented, digital signal processing software library and application suite for use in radio pulsar astronomy. The library implements an extensive range of modular algorithms for use in coherent dedispersion, filterbank formation, pulse folding, and other tasks. The software is installed and compiled using the standard GNU configure and make system, and is able to read astronomical data in 18 different file formats, including FITS, S2, CPSR, CPSR2, PuMa, PuMa2, WAPP, ASP, and Mark5.

[ascl:1010.007]
JAVELIN: Just Another Vehicle for Estimating Lags In Nuclei (formerly known as SPEAR)

JAVELIN (SPEAR) is a new approach to reverberation mapping that computes the lags between the AGN continuum and emission line light curves and their statistical confidence limits. It uses a damped random walk model to describe the quasar continuum variability and the ansatz that emission line variability is a scaled, smoothed and displaced version of the continuum. While currently configured only to simultaneously fit light curve means, it includes a general linear parameters formalism to fit more complex trends or calibration offsets. The noise matrix can be modified to allow for correlated errors, and the correlation matrix can be modified to use a different stochastic process. The transfer function model is presently a tophat, but this can be altered by changing the line-continuum covariance matrices. It is also able to cope with some problems in traditional reverberation mapping, such as irregular sampling, correlated errors and seasonal gaps.

[ascl:1010.008]
midIR_sensitivity: Mid-infrared astronomy with METIS

Kendrew, Sarah; Jolissaint, Laurent; Brandl, Bernhard; Lenzen, Rainer; Pantin, Eric; Glasse, Alistair; Blommaert, Joris; Venema, Lars; Siebenmorgen, Ralf; Molster, Frank

midIR_sensitivity is IDL code that calculates the sensitivity of a ground-based mid-infrared instrument for astronomy. The code was written for the Phase A study of the instrument METIS (http://www.strw.leidenuniv.nl/metis), the Mid-Infrared E-ELT Imager and Spectrograph, for the 42-m European Extremely Large Telescope. The model uses a detailed set of input parameters for site characteristics and atmospheric profiles, optical design, and thermal background. The code and all input parameters are highly tailored for the particular design parameters of the E-ELT and METIS, however, the program is structured in such a way that the parameters can easily be adjusted for a different system, or alternative input files used.

[ascl:1010.009]
ModeCode: Bayesian Parameter Estimation for Inflation

ModeCode is a publicly available code that computes the primordial scalar and tensor power spectra for single field inflationary models. ModeCode solves the inflationary mode equations numerically, avoiding the slow roll approximation. It provides an efficient and robust numerical evaluation of the inflationary perturbation spectrum, and allows the free parameters in the inflationary potential to be estimated within an MCMC computation. ModeCode also allows the estimation of reheating uncertainties once a potential has been specified. It is interfaced with CAMB and CosmoMC to compute cosmic microwave background angular power spectra and perform likelihood analysis and parameter estimation. It can be run as a standalone code as well. Errors in the results from ModeCode contribute negligibly to the error budget for analyses of data from Planck or other next generation experiments.

[ascl:1010.010]
Fast WMAP Likelihood Code and GSR PC Functions

We place functional constraints on the shape of the inflaton potential from the cosmic microwave background through a variant of the generalized slow roll approximation that allows large amplitude, rapidly changing deviations from scale-free conditions. Employing a principal component decomposition of the source function G'~3(V'/V)^2 - 2V''/V and keeping only those measured to better than 10% results in 5 nearly independent Gaussian constraints that maybe used to test any single-field inflationary model where such deviations are expected. The first component implies < 3% variations at the 100 Mpc scale. One component shows a 95% CL preference for deviations around the 300 Mpc scale at the ~10% level but the global significance is reduced considering the 5 components examined. This deviation also requires a change in the cold dark matter density which in a flat LCDM model is disfavored by current supernova and Hubble constant data and can be tested with future polarization or high multipole temperature data. Its impact resembles a local running of the tilt from multipoles 30-800 but is only marginally consistent with a constant running beyond this range. For this analysis, we have implemented a ~40x faster WMAP7 likelihood method which we have made publicly available.

[ascl:1010.011]
PSpectRe: A Pseudo-Spectral Code for (P)reheating

PSpectRe, written in C++, uses Fourier-space pseudo-spectral methods to evolve interacting scalar fields in an expanding universe. The code is optimized for the analysis of parametric resonance in the post-inflationary universe and provides an alternative to finite differencing codes. PSpectRe has both second- (Velocity-Verlet) and fourth-order (Runge-Kutta) time integrators. In some circumstances PSpectRe obtains reliable results while using substantially fewer points than a finite differencing code by computing the post-resonance equation of state. PSpectRe is designed to be easily extended to other problems in early-universe cosmology, including the generation of gravitational waves during phase transitions and pre-inflationary bubble collisions.

[ascl:1010.012]
glafic: Software Package for Analyzing Gravitational Lensing

glafic is a public software package for analyzing gravitational lensing. It offers many features including computations of various lens properties for many mass models, solving the lens equation using an adaptive grid algorithm, simulations of lensed extended images with PSF convolved, and efficient modeling of observed strong lens systems.

[ascl:1010.013]
AstroGK: Astrophysical Gyrokinetics Code

The gyrokinetic simulation code AstroGK is developed to study fundamental aspects of kinetic plasmas and for applications mainly to astrophysical problems. AstroGK is an Eulerian slab code that solves the electromagnetic Gyrokinetic-Maxwell equations in five-dimensional phase space, and is derived from the existing gyrokinetics code GS2 by removing magnetic geometry effects. Algorithms used in the code are described. The code is benchmarked using linear and nonlinear problems. Serial and parallel performance scalings are also presented.

[ascl:1010.014]
Athena: Grid-based code for astrophysical magnetohydrodynamics (MHD)

Athena is a grid-based code for astrophysical magnetohydrodynamics (MHD). It was developed primarily for studies of the interstellar medium, star formation, and accretion flows. The code has been designed to be easily extensible for use with static and adaptive mesh refinement. It combines higher-order Godunov methods with the constrained transport (CT) technique to enforce the divergence-free constraint on the magnetic field. Discretization is based on cell-centered volume-averages for mass, momentum, and energy, and face-centered area-averages for the magnetic field. Novel features of the algorithm include (1) a consistent framework for computing the time- and edge-averaged electric fields used by CT to evolve the magnetic field from the time- and area-averaged Godunov fluxes, (2) the extension to MHD of spatial reconstruction schemes that involve a dimensionally-split time advance, and (3) the extension to MHD of two different dimensionally-unsplit integration methods. Implementation of the algorithm in both C and Fortran95 is detailed, including strategies for parallelization using domain decomposition. Results from a test suite which includes problems in one-, two-, and three-dimensions for both hydrodynamics and MHD are given, not only to demonstrate the fidelity of the algorithms, but also to enable comparisons to other methods. The source code is freely available for download on the web.

[ascl:1010.015]
Fyris Alpha: Computational Fluid Dynamics Code

Fyris Alpha is a high resolution, shock capturing, multi-phase, up-wind Godunov method hydrodynamics code that includes a variable equation of state and optional microphysics such as cooling, gravity and multiple tracer variables. The code has been designed and developed for use primarily in astrophysical applications, such as galactic and interstellar bubbles, hypersonic shocks, and a range of jet phenomena. Fyris Alpha boasts both higher performance and more detailed microphysics than its predecessors, with the aim of producing output that is closer to the observational domain, such as emission line fluxes, and eventually, detailed spectral synthesis. Fyris Alpha is approximately 75,000 lines of C code; it encapsulates the split sweep semi-lagrangian remap PPM method used by ppmlr (in turn developed from VH1, Blondin et al. 1998) but with an improved Riemann solver, which is derived from the exact solver of Gottlieb and Groth (1988), a significantly faster solution than previous solvers. It has a number of optimisations that have improved the speed so that additional calculations neeed for multi-phase simulations become practical.

[ascl:1010.016]
SpDust/SpDust.2: Code to Calculate Spinning Dust Spectra

SpDust is an IDL program that evaluates the spinning dust emissivity for user-provided environmental conditions. A new version of the code became available in March, 2010.

[ascl:1010.017]
AOFlagger: RFI Software

The radio frequency interference code AOFlagger automatically flags data and can be used to analyze the data in a measurement. The purpose of flagging is to mark samples that are affected by interfering sources such as radio stations, airplanes, electrical fences or other transmitting interferers.

The tools in the package are meant for offline use. The software package contains a graphical interface ("rfigui") that can be used to visualize a measurement set and analyze mitigation techniques. It also contains a console flagger ("rficonsole") that can execute a script of mitigation functions without the overhead of a graphical environment. All tools were written in C++.

The software has been tested extensively on low radio frequencies (150 MHz or lower) produced by the WSRT and LOFAR telescopes. LOFAR is the Low Frequency Array that is built in and around the Netherlands. Higher frequencies should work as well. Some of the methods implemented are the SumThreshold, the VarThreshold and the singular value decomposition (SVD) method. Included also are several surface fitting algorithms.

The software is published under the GNU General Public License version 3.

[ascl:1010.018]
Emu CMB: Power spectrum emulator

Emu CMB is a fast emulator the CMB temperature power spectrum based on CAMB (Jan 2010 version). Emu CMB is based on a "space-filling" Orthogonal Array Latin Hypercube design in a de-correlated parameter space obtained by using a fiducial WMAP5 CMB Fisher matrix as a rotation matrix. This design strategy allows for accurate interpolation with small numbers of simulation design points. The emulator presented here is calibrated with 100 CAMB runs that are interpolated over the design space using a global quadratic polynomial fit.

[ascl:1010.019]
NBSymple: A Double Parallel, Symplectic N-body Code Running on Graphic Processing Units

NBSymple is a numerical code which numerically integrates the equation of motions of N 'particles' interacting via Newtonian gravitation and move in an external galactic smooth field. The force evaluation on every particle is done by mean of direct summation of the contribution of all the other system's particle, avoiding truncation error. The time integration is done with second-order and sixth-order symplectic schemes. NBSymple has been parallelized twice, by mean of the Computer Unified Device Architecture to make the all-pair force evaluation as fast as possible on high-performance Graphic Processing Units NVIDIA TESLA C 1060, while the O(N) computations are distributed on various CPUs by mean of OpenMP Application Program. The code works both in single precision floating point arithmetics or in double precision. The use of single precision allows the use at best of the GPU performances but, of course, limits the precision of simulation in some critical situations. We find a good compromise in using a software reconstruction of double precision for those variables that are most critical for the overall precision of the code.

[ascl:1010.020]
Libpsht: Algorithms for Efficient Spherical Harmonic Transforms

Libpsht (or "library for Performing Spherical Harmonic Transforms") is a collection of algorithms for efficient conversion between spatial-domain and spectral-domain representations of data defined on the sphere. The package supports transforms of scalars as well as spin-1 and spin-2 quantities, and can be used for a wide range of pixelisations (including HEALPix, GLESP and ECP). It will take advantage of hardware features like multiple processor cores and floating-point vector operations, if available. Even without this additional acceleration, the employed algorithms are among the most efficient (in terms of CPU time as well as memory consumption) currently being used in the astronomical community.

The library is written in strictly standard-conforming C90, ensuring portability to many different hard- and software platforms, and allowing straightforward integration with codes written in various programming languages like C, C++, Fortran, Python etc.

Libpsht is distributed under the terms of the GNU General Public License (GPL) version 2.

Development on this project has ended; its successor is libsharp (ascl:1402.033).

[ascl:1010.021]
velfit: A Code for Modeling Non-Circular Flows in Disk Galaxies

High-quality velocity maps of galaxies frequently exhibit signatures of non-circular streaming motions. velfit yields results that are more easily interpreted than the commonly used procedure. It can estimate the magnitudes of forced non-circular motions over a broad range of bar strengths from a strongly barred galaxy, through cases of mild bar-like distortions to placing bounds on the shapes of halos in galaxies having extended rotation curves.

This code is no longer maintained and has been superseded by DiskFit (ascl:1209.011).

[ascl:1010.022]
GR1D: Open-Source Code for Spherically-Symmetric Stellar Collapse to Neutron Stars and Black Holes

GR1D is based on the Eulerian formulation of GR hydrodynamics (GRHD) put forth by Romero-Ibanez-Gourgoulhon and employs radial-gauge, polar-slicing coordinates in which the 3+1 equations simplify substantially. GR1D is intended for the simulation of stellar collapse to neutron stars and black holes and will also serve as a testbed for modeling technology to be incorporated in multi-D GR codes. Its GRHD part is coupled to various finite-temperature microphysical equations of state in tabulated form that we make available with GR1D.

[ascl:1010.023]
AstroSim: Collaborative Visualization of an Astrophysics Simulation in Second Life

AstroSim is a Second Life based prototype application for synchronous collaborative visualization targeted at astronomers.

[ascl:1010.024]
ADAPTSMOOTH: A Code for the Adaptive Smoothing of Astronomical Images

ADAPTSMOOTH serves to smooth astronomical images in an adaptive fashion in order to enhance the signal-to-noise ratio (S/N). The adaptive smoothing scheme allows taking full advantage of the spatially resolved photometric information contained in an image in that at any location the minimal smoothing is applied to reach the requested S/N. Support is given to match more images on the same smoothing length, such that proper estimates of local colors can be done, with a big potential impact on multi-wavelength studies of extended sources (galaxies, nebulae). Different modes to estimate local S/N are provided. In addition to classical arithmetic-mean averaging mode, the code can operate in median averaging mode, resulting in a significant enhancement of the final image quality and very accurate flux conservation.

[ascl:1010.025]
SimFast21: Simulation of the Cosmological 21cm Signal

SimFast 21 generates a simulation of the cosmological 21cm signal. While limited to low spatial resolution, the next generation low-frequency radio interferometers that target 21 cm observations during the era of reionization and prior will have instantaneous fields-of-view that are many tens of square degrees on the sky. Predictions related to various statistical measurements of the 21 cm brightness temperature must then be pursued with numerical simulations of reionization with correspondingly large volume box sizes, of order 1000 Mpc on one side. The authors pursued a semi-numerical scheme to simulate the 21 cm signal during and prior to Reionization by extending a hybrid approach where simulations are performed by first laying down the linear dark matter density field, accounting for the non-linear evolution of the density field based on second-order linear perturbation theory as specified by the Zel'dovich approximation, and then specifying the location and mass of collapsed dark matter halos using the excursion-set formalism. The location of ionizing sources and the time evolving distribution of ionization field is also specified using an excursion-set algorithm. They account for the brightness temperature evolution through the coupling between spin and gas temperature due to collisions, radiative coupling in the presence of Lyman-alpha photons and heating of the intergalactic medium, such as due to a background of X-ray photons. The method is capable of producing the required large volume simulations with adequate resolution in a reasonable time so a large number of realizations can be obtained with variations in assumptions related to astrophysics and background cosmology that govern the 21 cm signal.

[ascl:1010.026]
SingLe: A F90-package devoted to Softened Gravity in gaseous discs

**S**often**ingLe**ngth: Because Newton's law of Gravitation diverges as the relative separations |r'-r| tends to zero, it is common to add a positive constant λ also known as the "softening length", i.e. :

|r'-r|² ← |r'-r|² + λ².

SingLe determines the appropriate value of this Softening Length λ for a given disc local structure (thickness 2h and vertical stratification ρ), in the axially symmetric, flat disc limit, preserving at best the Newtonian character of the gravitational potential and associated forces. Mass density ρ(z) is assumed to be locally expandable in the z-direction according to:

ρ(z)= ρ_{0}[1 + a_{1}(z/h)^{2}+...+a_{q} (z/h)^{2q}+...+a_{N} (z/h)^{2 N}].

[ascl:1010.027]
SNANA: A Public Software Package for Supernova Analysis

Kessler, Richard; Bernstein, Joseph P.; Cinabro, David; Dilday, Benjamin; Frieman, Joshua A.; Jha, Saurabh; Kuhlmann, Stephen; Miknaitis, Gajus; Sako, Masao; Taylor, Matt; VanderPlas, Jake

SNANA is a general analysis package for supernova (SN) light curves that contains a simulation, light curve fitter, and cosmology fitter. The software is designed with the primary goal of using SNe Ia as distance indicators for the determination of cosmological parameters, but it can also be used to study efficiencies for analyses of SN rates, estimate contamination from non-Ia SNe, and optimize future surveys. Several SN models are available within the same software architecture, allowing technical features such as K-corrections to be consistently used among multiple models, and thus making it easier to make detailed comparisons between models. New and improved light-curve models can be easily added. The software works with arbitrary surveys and telescopes and has already been used by several collaborations, leading to more robust and easy-to-use code. This software is not intended as a final product release, but rather it is designed to undergo continual improvements from the community as more is learned about SNe.

[ascl:1010.028]
GALPROP: Code for Cosmic-ray Transport and Diffuse Emission Production

GALPROP is a numerical code for calculating the propagation of relativistic charged particles and the diffuse emissions produced during their propagation. The GALPROP code incorporates as much realistic astrophysical input as possible together with latest theoretical developments. The code calculates the propagation of cosmic-ray nuclei, antiprotons, electrons and positrons, and computes diffuse γ-rays and synchrotron emission in the same framework. Each run of the code is governed by a configuration file allowing the user to specify and control many details of the calculation. Thus, each run of the code corresponds to a potentially different "model." The code continues to be developed and is available to the scientific community.

[ascl:1010.029]
DNEST: Diffusive Nested Sampling

This code is a general Monte Carlo method based on Nested Sampling (NS) for sampling complex probability distributions and estimating the normalising constant. The method uses one or more particles, which explore a mixture of nested probability distributions, each successive distribution occupying ~e^-1 times the enclosed prior mass of the previous distribution. While NS technically requires independent generation of particles, Markov Chain Monte Carlo (MCMC) exploration fits naturally into this technique. This method can achieve four times the accuracy of classic MCMC-based Nested Sampling, for the same computational effort; equivalent to a factor of 16 speedup. An additional benefit is that more samples and a more accurate evidence value can be obtained simply by continuing the run for longer, as in standard MCMC.

[ascl:1010.030]
CosmicEmu: Cosmic Emulator for the Dark Matter Power Spectrum

Lawrence, Earl; Heitmann, Katrin; White, Martin; Higdon, David; Wagner, Christian; Habib, Salman; Williams, Brian

Many of the most exciting questions in astrophysics and cosmology, including the majority of observational probes of dark energy, rely on an understanding of the nonlinear regime of structure formation. In order to fully exploit the information available from this regime and to extract cosmological constraints, accurate theoretical predictions are needed. Currently such predictions can only be obtained from costly, precision numerical simulations. The "Coyote Universe'' simulation suite comprises nearly 1,000 N-body simulations at different force and mass resolutions, spanning 38 wCDM cosmologies. This large simulation suite enabled construct of a prediction scheme, or emulator, for the nonlinear matter power spectrum accurate at the percent level out to k~1 h/Mpc. This is the first cosmic emulator for the dark matter power spectrum.

[ascl:1010.031]
DimReduce: Nonlinear Dimensionality Reduction of Very Large Datasets with Locally Linear Embedding (LLE) and its Variants

DimReduce is a C++ package for performing nonlinear dimensionality reduction of very large datasets with Locally Linear Embedding (LLE) and its variants. DimReduce is built for speed, using the optimized linear algebra packages BLAS, LAPACK, and ARPACK. Because of the need for storing very large matrices (1000 by 10000, for our SDSS LLE work), DimReduce is designed to use binary FITS files as inputs and outputs. This means that using the code is a bit more cumbersome. For smaller-scale LLE, where speed of computation is not as much of an issue, the Modular Data Processing toolkit may be a better choice. It is a python toolkit with some LLE functionality, which VanderPlas contributed.

This code has been rewritten and included in scikit-learn and an improved version is included in http://mmp2.github.io/megaman/

[ascl:1010.032]
Extreme Deconvolution: Density Estimation using Gaussian Mixtures in the Presence of Noisy, Heterogeneous and Incomplete Data

Extreme-deconvolution is a general algorithm to infer a d-dimensional distribution function from a set of heterogeneous, noisy observations or samples. It is fast, flexible, and treats the data's individual uncertainties properly, to get the best description possible for the underlying distribution. It performs well over the full range of density estimation, from small data sets with only tens of samples per dimension, to large data sets with hundreds of thousands of data points.

[ascl:1010.033]
GALEV Evolutionary Synthesis Models

GALEV evolutionary synthesis models describe the evolution of stellar populations in general, of star clusters as well as of galaxies, both in terms of resolved stellar populations and of integrated light properties over cosmological timescales of > 13 Gyr from the onset of star formation shortly after the Big Bang until today.

For galaxies, GALEV includes a simultaneous treatment of the chemical evolution of the gas and the spectral evolution of the stellar content, allowing for a chemically consistent treatment using input physics (stellar evolutionary tracks, stellar yields and model atmospheres) for a large range of metallicities and consistently account for the increasing initial abundances of successive stellar generations.

[ascl:1010.034]
iCosmo: An Interactive Cosmology Package

iCosmo is a software package to perform interactive cosmological calculations for the low redshift universe. The computation of distance measures, the matter power spectrum, and the growth factor is supported for any values of the cosmological parameters. It also performs the computation of observables for several cosmological probes such as weak gravitational lensing, baryon acoustic oscillations and supernovae. The associated errors for these observables can be derived for customised surveys, or for pre-set values corresponding to current or planned instruments. The code also allows for the calculation of cosmological forecasts with Fisher matrices which can be manipulated to combine different surveys and cosmological probes. The code is written in the IDL language and thus benefits from the convenient interactive features and scientific library available in this language. iCosmo can also be used as an engine to perform cosmological calculations in batch mode, and forms a convenient evolutive platform for the development of further cosmological modules. With its extensive documentation, it may also serve as a useful resource for teaching and for newcomers in the field of cosmology.

[ascl:1010.035]
SLR: Stellar Locus Regression

Stellar Locus Regression (SLR) is a simple way to calibrate colors at the 1-2% level, and magnitudes at the sub-5% level as limited by 2MASS, without the traditional use of standard stars. With SLR, stars in any field are "standards." This is an entirely new way to calibrate photometry. SLR exploits the simple fact that most stars lie along a well defined line in color-color space called the stellar locus. Cross-match point-sources in flattened images taken through different passbands and plot up all color vs color combinations, and you will see the stellar locus with little effort. SLR calibrates colors by fitting these colors to a standard line. Cross-match with 2MASS on top of that, and SLR will deliver calibrated magnitudes as well.

[ascl:1010.036]
Montage: An Astronomical Image Mosaicking Toolkit

Jacob, Joseph C.; Katz, Daniel S.; Berriman, G. Bruce; Good, John; Laity, Anastasia C.; Deelman, Ewa; Kesselman, Carl; Singh, Gurmeet; Su, Mei-Hui; Prince, Thomas A.; Williams, Roy

Montage is an open source code toolkit for assembling Flexible Image Transport System (FITS) images into custom mosaics. It runs on all common Linux/Unix platforms, on desktops, clusters and computational grids, and supports all World Coordinate System (WCS) projections and common coordinate systems. Montage preserves spatial and calibration fidelity of input images, processes 40 million pixels in up to 32 minutes on 128 nodes on a Linux cluster, and provides independent engines for analyzing the geometry of images on the sky, re-projecting images, rectifying background emission to a common level, and co-adding images. It offers convenient tools for managing and manipulating large image files.

[ascl:1010.037]
FastChi: A Fast Chi-squared Technique For Period Search of Irregularly Sampled Data

The Fast Chi-Squared Algorithm is a fast, powerful technique for detecting periodicity. It was developed for analyzing variable stars, but is applicable to many of the other applications where the Fast Fourier Transforms (FFTs) or other periodograms (such as Lomb-Scargle) are currently used. The Fast Chi-squared technique takes a data set (e.g. the brightness of a star measured at many different times during a series of observations) and finds the periodic function that has the best frequency and shape (to an arbitrary number of harmonics) to fit the data. Among its advantages are:

- Statistical efficiency: all of the data are used, weighted by their individual error bars, giving a result with a significance calibrated in well-understood Chi-squared statistics.
- Sensitivity to harmonic content: many conventional techniques look only at the significance (or the amplitude) of the fundamental sinusoid and discard the power of the higher harmonics.
- Insensitivity to the sample timing: you won't find a period of 24 hours just because you take your observations at night. You do not need to window your data.
- The frequency search is gridded more tightly than the traditional "integer number of cycles over the span of observations", eliminating power loss from peaks that fall between the grid points.
- Computational speed: The complexity of the algorithm is O(NlogN), where N is the number of frequencies searched, due to its use of the FFT.

[ascl:1010.038]
Low Resolution Spectral Templates For AGNs and Galaxies From 0.03 -- 30 microns

Assef, R. J.; Kochanek, C. S.; Brodwin, M.; Cool, R.; Forman, W.; Gonzalez, A. H.; Hickox, R. C.; Jones, C.; Le Floc'h, E.; Moustakas, J.; Murray, S. S.; Stern, D.

We present a set of low resolution empirical SED templates for AGNs and galaxies in the wavelength range from 0.03 to 30 microns based on the multi-wavelength photometric observations of the NOAO Deep-Wide Field Survey Bootes field and the spectroscopic observations of the AGN and Galaxy Evolution Survey. Our training sample is comprised of 14448 galaxies in the redshift range 0<~z<~1 and 5347 likely AGNs in the range 0<~z<~5.58. We use our templates to determine photometric redshifts for galaxies and AGNs. While they are relatively accurate for galaxies, their accuracies for AGNs are a strong function of the luminosity ratio between the AGN and galaxy components. Somewhat surprisingly, the relative luminosities of the AGN and its host are well determined even when the photometric redshift is significantly in error. We also use our templates to study the mid-IR AGN selection criteria developed by Stern et al.(2005) and Lacy et al.(2004). We find that the Stern et al.(2005) criteria suffers from significant incompleteness when there is a strong host galaxy component and at z =~ 4.5, when the broad Halpha emission line is redshifted into the [3.6] band, but that it is little contaminated by low and intermediate redshift galaxies. The Lacy et al.(2004) criterion is not affected by incompleteness at z =~ 4.5 and is somewhat less affected by strong galaxy host components, but is heavily contaminated by low redshift star forming galaxies. Finally, we use our templates to predict the color-color distribution of sources in the upcoming WISE mission and define a color criterion to select AGNs analogous to those developed for IRAC photometry. We estimate that in between 640,000 and 1,700,000 AGNs will be identified by these criteria, but will have serious completeness problems for z >~ 3.4.

[ascl:1010.039]
Parameter Estimation from Time-Series Data with Correlated Errors: A Wavelet-Based Method and its Application to Transit Light Curves

We consider the problem of fitting a parametric model to time-series data that are afflicted by correlated noise. The noise is represented by a sum of two stationary Gaussian processes: one that is uncorrelated in time, and another that has a power spectral density varying as $1/f^gamma$. We present an accurate and fast [O(N)] algorithm for parameter estimation based on computing the likelihood in a wavelet basis. The method is illustrated and tested using simulated time-series photometry of exoplanetary transits, with particular attention to estimating the midtransit time. We compare our method to two other methods that have been used in the literature, the time-averaging method and the residual-permutation method. For noise processes that obey our assumptions, the algorithm presented here gives more accurate results for midtransit times and truer estimates of their uncertainties.

[ascl:1010.040]
Cosmic String Simulations

Complicated cosmic string loops will fragment until they reach simple, non-intersecting ("stable") configurations. Through extensive numerical study, these attractor loop shapes are characterized including their length, velocity, kink, and cusp distributions. An initial loop containing $M$ harmonic modes will, on average, split into 3M stable loops. These stable loops are approximately described by the degenerate kinky loop, which is planar and rectangular, independently of the number of modes on the initial loop. This is confirmed by an analytic construction of a stable family of perturbed degenerate kinky loops. The average stable loop is also found to have a 40% chance of containing a cusp. This new analytic scheme explicitly solves the string constraint equations.

[ascl:1010.041]
FASTLens (FAst STatistics for weak Lensing): Fast Method for Weak Lensing Statistics and Map Making

The analysis of weak lensing data requires to account for missing data such as masking out of bright stars. To date, the majority of lensing analyses uses the two point-statistics of the cosmic shear field. These can either be studied directly using the two-point correlation function, or in Fourier space, using the power spectrum. The two-point correlation function is unbiased by missing data but its direct calculation will soon become a burden with the exponential growth of astronomical data sets. The power spectrum is fast to estimate but a mask correction should be estimated. Other statistics can be used but these are strongly sensitive to missing data. The solution that is proposed by FASTLens is to properly fill-in the gaps with only NlogN operations, leading to a complete weak lensing mass map from which one can compute straight forwardly and with a very good accuracy any kind of statistics like power spectrum or bispectrum.

[ascl:1010.042]
WeightMixer: Hybrid Cross-power Spectrum Estimation

This code, which requires HEALPix 2.x, allows you to generate power spectrum estimators from WMAP 5-year maps and generate hybrid cross- and auto- power spectrum and covariance from general foreground-cleaned maps. In addition, it allows you to simulate combined maps or combinations of maps for individual detectors and do MPI spherical transforms of arrays of maps, calculate coupling matrices etc. The code includes all of LensPix - the MPI framework used for doing spherical transforms (based on HealPix).

[ascl:1010.043]
FSPS: Flexible Stellar Population Synthesis

FSPS is a flexible SPS package that allows the user to compute simple stellar populations (SSPs) for a range of IMFs and metallicities, and for a variety of assumptions regarding the morphology of the horizontal branch, the blue straggler population, the post--AGB phase, and the location in the HR diagram of the TP-AGB phase. From these SSPs the user may then generate composite stellar populations (CSPs) for a variety of star formation histories (SFHs) and dust attenuation prescriptions. Outputs include the "observed" spectra and magnitudes of the SSPs and CSPs at arbitrary redshift. In addition to these fortran routines, several IDL routines are provided that allow easy manipulation of the output. FSPS was designed with the intention that the user would make full use of the provided fortran routines. However, the full FSPS package is quite large, and requires some time for the user to become familiar with all of the options and syntax. Some users may only need SSPs for a range of metallicities and IMFs. For such users, standard SSP sets for several IMFs, evolutionary tracks, and spectral libraries are available here.

[ascl:1010.044]
MAESTRO: An Adaptive Low Mach Number Hydrodynamics Algorithm for Stellar Flows

MAESTRO, a low Mach number stellar hydrodynamics code, simulates long-time, low-speed flows that would be prohibitively expensive to model using traditional compressible codes. MAESTRO is based on an equation set derived using low Mach number asymptotics; this equation set does not explicitly track acoustic waves and thus allows a significant increase in the time step. MAESTRO is suitable for two- and three-dimensional local atmospheric flows as well as three-dimensional full-star flows, and adaptive mesh refinement (AMR) has been incorporated into the code. The expansion of the base state for full-star flows using a novel mapping technique between the one-dimensional base state and the Cartesian grid is also available.

NOTE: MAESTRO is no longer being actively developed. Users should switch to MAESTROeX (ascl:1908.019) to take advantage of the latest capabilities.

[ascl:1010.045]
PLUTO: A Code for Flows in Multiple Spatial Dimensions

PLUTO is a modular Godunov-type code intended mainly for astrophysical applications and high Mach number flows in multiple spatial dimensions. The code embeds different hydrodynamic modules and multiple algorithms to solve the equations describing Newtonian, relativistic, MHD, or relativistic MHD fluids in Cartesian or curvilinear coordinates. PLUTO is entirely written in the C programming language and can run on either single processor machines or large parallel clusters through the MPI library. A simple user-interface based on the Python scripting language is available to setup a physical problem in a quick and self-explanatory way. Computations may be carried on either static or adaptive (structured) grids, the latter functionality being provided through the Chombo adaptive mesh refinement library.

[ascl:1010.046]
indexf: Line-strength Indices in Fully Calibrated FITS Spectra

This program measures line-strength indices in fully calibrated FITS spectra. By "fully calibrated" one should understand wavelength and relative flux-calibrated data. Note that the different types of line-strength indices that can be measured with indexf (see below) do not require absolute flux calibration. If even a relative flux-calibration is absent (or deficient), the derived indices should be transformed to an appropriate spectrophotometric system. The program can also compute index errors resulting from the propagation of random errors (e.g. photon statistics, read-out noise). This option is only available if the user provides the error spectrum as an additional input FITS file to indexf. The error spectrum must contain the unbiased standard deviation (and not the variance!) for each pixel of the data spectrum. In addition, indexf also estimates the effect of errors on radial velocity. For this purpose, the program performs Monte Carlo simulations by measuring each index using randomly drawn radial velocities (following a Gaussian distribution of a given standard deviation). If no error file is employed, the program can perform numerical simulations with synthetic error spectra, the latter generated from the original data spectra and assuming randomly generated S/N ratios.

[ascl:1010.047]
ISW and Weak Lensing Likelihood Code

ISW and Weak Lensing Likelihood code is the likelihood code that calculates the likelihood of Integrated Sachs Wolfe and Weak Lensing of Cosmic Microwave Background using the WMAP 3year CMB maps with mass tracers such as 2MASS (2-Micron All Sky Survey), SDSS LRG (Sloan Digital Sky Survey Luminous Red Galaxies), SDSS QSOs (Sloan Digital Sky Survey Quasars) and NVSS (NRAO VLA All Sky Survey) radio sources. The details of the analysis (*thus the likelihood code) can be understood by reading the papers ISW paper and Weak lensing paper. The code does brute force theoretical matter power spectrum and calculations with CAMB. See the paper for an introduction, descriptions, and typical results from some pre-WMAP data. The code is designed to be integrated into CosmoMC. For further information concerning the integration, see Code Modification for integration into COSMOMC.

[ascl:1010.048]
OCTGRAV: Sparse Octree Gravitational N-body Code on Graphics Processing Units

Octgrav is a very fast tree-code which runs on massively parallel Graphical Processing Units (GPU) with NVIDIA CUDA architecture. The algorithms are based on parallel-scan and sort methods. The tree-construction and calculation of multipole moments is carried out on the host CPU, while the force calculation which consists of tree walks and evaluation of interaction list is carried out on the GPU. In this way, a sustained performance of about 100GFLOP/s and data transfer rates of about 50GB/s is achieved. It takes about a second to compute forces on a million particles with an opening angle of $ heta approx 0.5$.

To test the performance and feasibility, we implemented the algorithms in CUDA in the form of a gravitational tree-code which completely runs on the GPU. The tree construction and traverse algorithms are portable to many-core devices which have support for CUDA or OpenCL programming languages. The gravitational tree-code outperforms tuned CPU code during the tree-construction and shows a performance improvement of more than a factor 20 overall, resulting in a processing rate of more than 2.8 million particles per second.

The code has a convenient user interface and is freely available for use.

[ascl:1010.049]
Gas-momentum-kinetic SZ cross-correlations

We present a new method for detecting the missing baryons by generating a template for the kinematic Sunyaev-Zel'dovich effect. The template is computed from the product of a reconstructed velocity field with a galaxy field. We provide maps of such templates constructed from SDSS Data Release 7 spectroscopic data (SDSS VAGC sample) along side with their expected two point correlation functions with CMB temperature anisotropies. Codes of generating such coefficients of the two point correlation function are also released to provide users of the gas-momentum map a way to change the parameters such as cosmological parameters, reionization history, ionization parameters, etc.

[ascl:1010.050]
LensPerfect: Gravitational Lens Massmap Reconstructions Yielding Exact Reproduction of All Multiple Images

LensPerfect is a new approach to the massmap reconstruction of strong gravitational lenses. Conventional methods iterate over possible lens models which reproduce the observed multiple image positions well but not exactly. LensPerfect only produces solutions which fit all of the data exactly. Magnifications and shears of the multiple images can also be perfectly constrained to match observations.

[ascl:1010.051]
NEMO: A Stellar Dynamics Toolbox

NEMO is an extendible Stellar Dynamics Toolbox, following an Open-Source Software model. It has various programs to create, integrate, analyze and visualize N-body and SPH like systems, following the pipe and filter architecture. In addition there are various tools to operate on images, tables and orbits, including FITS files to export/import to/from other astronomical data reduction packages. A large growing fraction of NEMO has been contributed by a growing list of authors. The source code consist of a little over 4000 files and a little under 1,000,000 lines of code and documentation, mostly C, and some C++ and Fortran. NEMO development started in 1986 in Princeton (USA) by Barnes, Hut and Teuben. See also ZENO (ascl:1102.027) for the version that Barnes maintains.

[ascl:1010.052]
EAZY: A Fast, Public Photometric Redshift Code

EAZY, Easy and Accurate Zphot from Yale, determines photometric redshifts. The program is optimized for cases where spectroscopic redshifts are not available, or only available for a biased subset of the galaxies. The code combines features from various existing codes: it can fit linear combinations of templates, it includes optional flux- and redshift-based priors, and its user interface is modeled on the popular HYPERZ (ascl:1108.010) code. The default template set, as well as the default functional forms of the priors, are not based on (usually highly biased) spectroscopic samples, but on semi-analytical models. Furthermore, template mismatch is addressed by a novel rest-frame template error function. This function gives different wavelength regions different weights, and ensures that the formal redshift uncertainties are realistic. A redshift quality parameter, Q_z, provides a robust estimate of the reliability of the photometric redshift estimate.

[ascl:1010.053]
Halofitting codes for DGP and Degravitation

We perform N-body simulations of theories with infinite-volume extra dimensions, such as the Dvali-Gabadadze-Porrati (DGP) model and its higher-dimensional generalizations, where 4D gravity is mediated by massive gravitons. The longitudinal mode of these gravitons mediates an extra scalar force, which we model as a density-dependent modification to the Poisson equation. This enhances gravitational clustering, particularly on scales that have undergone mild nonlinear processing. While the standard non-linear fitting algorithm of Smith et al. overestimates this power enhancement on non-linear scales, we present a modified fitting formula that offers a remarkably good fit to our power spectra. Due to the uncertainty in galaxy bias, our results are consistent with precision power spectrum determinations from galaxy redshift surveys, even for graviton Compton wavelengths as small as 300 Mpc. Our model is sufficiently general that we expect it to capture the phenomenology of a wide class of related higher-dimensional gravity scenarios.

[ascl:1010.054]
MagnetiCS.c: Cosmic String Loop Evolution and Magnetogenesis

Large-scale coherent magnetic fields are observed in galaxies and clusters, but their ultimate origin remains a mystery. We reconsider the prospects for primordial magnetogenesis by a cosmic string network. We show that the magnetic flux produced by long strings has been overestimated in the past, and give improved estimates. We also compute the fields created by the loop population, and find that it gives the dominant contribution to the total magnetic field strength on present-day galactic scales. We present numerical results obtained by evolving semi-analytic models of string networks (including both one-scale and velocity-dependent one-scale models) in a Lambda-CDM cosmology, including the forces and torques on loops from Hubble redshifting, dynamical friction, and gravitational wave emission. Our predictions include the magnetic field strength as a function of correlation length, as well as the volume covered by magnetic fields. We conclude that string networks could account for magnetic fields on galactic scales, but only if coupled with an efficient dynamo amplification mechanism.

[ascl:1010.055]
SYNOW: A Highly Parameterized Spectrum Synthesis Code for Direct Analysis of SN Spectra

SYNOW is a highly parameterized spectrum synthesis code used primarily for direct (empirical) analysis of SN spectra. The code is based on simple assumptions : spherical symmetry; homologous expansion; a sharp photosphere that emits a blackbody continuous spectrum; and line formation by resonance scattering, treated in the Sobolev approximation. Synow does not do continuum transport, it does not solve rate equations, and it does not calculate ionization ratios. Its main function is to take line multiple scattering into account so that it can be used in an empirical spirit to make line identifications and estimate the velocity at the photosphere (or pseudo-photosphere) and the velocity interval within which each ion is detected. these quantities provide constraints on the composition structure of the ejected matter.

[ascl:1010.056]
PHOENIX: A General-purpose State-of-the-art Stellar and Planetary Atmosphere Code

PHOENIX is a general-purpose state-of-the-art stellar and planetary atmosphere code. It can calculate atmospheres and spectra of stars all across the HR-diagram including main sequence stars, giants, white dwarfs, stars with winds, TTauri stars, novae, supernovae, brown dwarfs and extrasolar giant planets.

[ascl:1010.057]
Tiny Tim: Simulated Hubble Space Telescope PSFs

Tiny Tim generates simulated Hubble Space Telescope point spread functions (PSFs). It is written in C and distributed as source code and runs on a wide variety of UNIX and VMS systems. Tiny Tim includes mirror zonal errors, time dependent aberrations (for the pre-repair instruments), field dependent obscuration patterns (for WF/PC-1 and WFPC2), and filter passband effects. It can produce a normally sampled or subsampled PSF. Output is a FITS image file.

[ascl:1010.058]
VINE: A numerical code for simulating astrophysical systems using particles

VINE is a particle based astrophysical simulation code. It uses a tree structure to efficiently solve the gravitational N-body problem and Smoothed Particle Hydrodynamics (SPH) to simulate gas dynamical effects. The code has been successfully used for a number of studies on galaxy interactions, galactic dynamics, star formation and planet formation and given the implemented physics, other applications are possible as well.

[ascl:1010.059]
CESAM: A Free Code for Stellar Evolution Calculations

The Cesam code is a consistent set of programs and routines which perform calculations of 1D quasi-hydrostatic stellar evolution including microscopic diffusion of chemical species and diffusion of angular momentum. The solution of the quasi-static equilibrium is performed by a collocation method based on piecewise polynomials approximations projected on a B-spline basis; that allows stable and robust calculations, and the exact restitution of the solution, not only at grid points, even for the discontinuous variables. Other advantages are the monitoring by only one parameter of the accuracy and its improvement by super-convergence. An automatic mesh refinement has been designed for adjusting the localisations of grid points according to the changes of unknowns. For standard models, the evolution of the chemical composition is solved by stiffly stable schemes of orders up to four; in the convection zones mixing and evolution of chemical are simultaneous. The solution of the diffusion equation employs the Galerkin finite elements scheme; the mixing of chemicals is then performed by a strong turbulent diffusion. A precise restoration of the atmosphere is allowed for.

[ascl:1010.060]
Pencil: Finite-difference Code for Compressible Hydrodynamic Flows

The Pencil code is a high-order finite-difference code for compressible hydrodynamic flows with magnetic fields. It is highly modular and can easily be adapted to different types of problems. The code runs efficiently under MPI on massively parallel shared- or distributed-memory computers, like e.g. large Beowulf clusters. The Pencil code is primarily designed to deal with weakly compressible turbulent flows. To achieve good parallelization, explicit (as opposed to compact) finite differences are used. Typical scientific targets include driven MHD turbulence in a periodic box, convection in a slab with non-periodic upper and lower boundaries, a convective star embedded in a fully nonperiodic box, accretion disc turbulence in the shearing sheet approximation, self-gravity, non-local radiation transfer, dust particle evolution with feedback on the gas, etc. A range of artificial viscosity and diffusion schemes can be invoked to deal with supersonic flows. For direct simulations regular viscosity and diffusion is being used. The code is written in well-commented Fortran90.

[ascl:1010.061]
EyE: Enhance Your Extraction

In EyE (Enhance Your Extraction) an artificial neural network connected to pixels of a moving window (retina) is trained to associate these input stimuli to the corresponding response in one or several output image(s). The resulting filter can be loaded in SExtractor to operate complex, wildly non-linear filters on astronomical images. Typical applications of EyE include adaptive filtering, feature detection and cosmetic corrections.

[ascl:1010.062]
MissFITS: Basic Maintenance and Packaging Tasks on FITS Files

MissFITS is a program that performs basic maintenance and packaging tasks on FITS files using an optimized FITS library. MissFITS can:

- add, edit, and remove FITS header keywords;
- split and join Multi-Extension-FITS (MEF) files;
- unpile and pile FITS data-cubes; and,
- create, check, and update FITS checksums, using R. Seaman’s protocol.

[ascl:1010.063]
SCAMP: Automatic Astrometric and Photometric Calibration

Astrometric and photometric calibrations have remained the most tiresome step in the reduction of large imaging surveys. SCAMP has been written to address this problem. The program efficiently computes accurate astrometric and photometric solutions for any arbitrary sequence of FITS images in a completely automatic way. SCAMP is released under the GNU General Public License.

[ascl:1010.064]
SExtractor: Source Extractor

This new software optimally detects, de-blends, measures and classifies sources from astronomical images: SExtractor (Source Extractor). A very reliable star/galaxy separation can be achieved on most images using a neural network trained with simulated images. Salient features of SExtractor include its ability to work on very large images, with minimal human intervention, and to deal with a wide variety of object shapes and magnitudes. It is therefore particularly suited to the analysis of large extragalactic surveys.

[ascl:1010.065]
Higher Post Newtonian Gravity Calculations

Motivated by experimental probes of general relativity, we adopt methods from perturbative (quantum) field theory to compute, up to certain integrals, the effective lagrangian for its n-body problem. Perturbation theory is performed about a background Minkowski spacetime to O[(v/c)^4] beyond Newtonian gravity, where v is the typical speed of these n particles in their center of energy frame. For the specific case of the 2 body problem, the major efforts underway to measure gravitational waves produced by in-spiraling compact astrophysical binaries require their gravitational interactions to be computed beyond the currently known O[(v/c)^7]. We argue that such higher order post-Newtonian calculations must be automated for these field theoretic methods to be applied successfully to achieve this goal. In view of this, we outline an algorithm that would in principle generate the relevant Feynman diagrams to an arbitrary order in v/c and take steps to develop the necessary software. The Feynman diagrams contributing to the n-body effective action at O[(v/c)^6] beyond Newton are derived.

[ascl:1010.066]
SkyMaker: Astronomical Image Simulations Made Easy

SkyMaker is a program that simulates astronomical images. It accepts object lists in ASCII generated by the Stuff program to produce realistic astronomical fields. SkyMaker is part of the EFIGI development project.

[ascl:1010.067]
Stuff: Simulating “Perfect” Astronomical Catalogues

Stuff is a program that simulates “perfect” astronomical catalogues. It generate object lists in ASCII which can read by the SkyMaker program to produce realistic astronomical fields. Stuff is part of the EFIGI development project.

[ascl:1010.068]
SWarp: Resampling and Co-adding FITS Images Together

SWarp resamples and co-adds together FITS images using any arbitrary astrometric projection defined in the WCS standard. It operates on pre-reduced images and their weight-maps. Based on the astrometric and photometric calibrations derived at an earlier phase of the pipeline, SWarp re-maps ("warps") the pixels to a perfect projection system, and co-adds them in an optimum way, according to their relative weights. SWarp's astrometric engine is based on a customized version of Calabretta's WCSLib 2.6 and supports all of the projections defined in the 2000 version of the WCS proposal.

[ascl:1010.069]
WeightWatcher: Code to Produce Control Maps

WeightWatcher is a program that combines weight-maps, flag-maps and polygon data in order to produce control maps which can directly be used in astronomical image-processing packages like Drizzle, SWarp or SExtractor.

[ascl:1010.070]
Fisher.py: Fisher Matrix Manipulation and Confidence Contour Plotting

Fisher.py allows you to combine constraints from multiple experiments (e.g., weak lensing + supernovae) and add priors (e.g., a flat universe) simply and easily. Calculate parameter uncertainties and plot confidence ellipses. Fisher matrix expectations for several experiments are included as calculated by myself (time delays) and the Dark Energy Task Force (WL/SN/BAO/CL/CMB), or provide your own.

[ascl:1010.071]
WSHAPE: Gravitational Softening and Adaptive Mass Resolution

Pairwise forces between particles in cosmological N-body simulations are generally softened to avoid hard collisions. Physically, this softening corresponds to treating the particles as diffuse clouds rather than point masses. For particles of unequal mass (and hence unequal softening length), computing the softened force involves a nontrivial double integral over the volumes of the two particles. We show that Plummer force softening is consistent with this interpretation of softening while spline softening is not. We provide closed-form expressions and numerical implementation for pairwise gravitational force laws for pairs of particles of general softening scales $epsilon_1$ and $epsilon_2$ assuming the commonly used cloud profiles: NGP, CIC, TSC, and PQS. Similarly, we generalize Plummer force law into pairs of particles of general softenings. We relate our expressions to the gaussian, Plummer and spline force softenings known from literature. Our expressions allow possible inclusions of pointlike particles such as stars or supermassive black holes.

[ascl:1010.072]
Enzo: AMR Cosmology Application

O'Shea, Brian W.; Bryan, Greg; Bordner, James; Norman, Michael L.; Abel, Tom; Harkness, Robert; Kritsuk, Alexei

Enzo is an adaptive mesh refinement (AMR), grid-based hybrid code (hydro + N-Body) which is designed to do simulations of cosmological structure formation. It uses the algorithms of Berger & Collela to improve spatial and temporal resolution in regions of large gradients, such as gravitationally collapsing objects. The Enzo simulation software is incredibly flexible, and can be used to simulate a wide range of cosmological situations with the available physics packages.

Enzo has been parallelized using the MPI message-passing library and can run on any shared or distributed memory parallel supercomputer or PC cluster. Simulations using as many as 1024 processors have been successfully carried out on the San Diego Supercomputing Center's Blue Horizon, an IBM SP.

[ascl:1010.073]
partiview: Immersive 4D Interactive Visualization of Large-Scale Simulations

In dense clusters a bewildering variety of interactions between stars can be observed, ranging from simple encounters to collisions and other mass-transfer encounters. With faster and special-purpose computers like GRAPE, the amount of data per simulation is now exceeding 1TB. Visualization of such data has now become a complex 4D data-mining problem, combining space and time, and finding interesting events in these large datasets. We have recently starting using the virtual reality simulator, installed in the Hayden Planetarium in the American Museum for Natural History, to tackle some of these problem. partiview is a program that enables you to visualize and animate particle data. partiview runs on relatively simple desktops and laptops, but is mostly compatible with its big brother VirDir.

[ascl:1010.074]
StarCrash: 3-d Evolution of Self-gravitating Fluid Systems

StarCrash is a parallel fortran code based on Smoothed Particle Hydrodynamics (SPH) techniques to calculate the 3-d evolution of self-gravitating fluid systems. The code in particularly suited to the study of stellar interactions, such as mergers of binary star systems and stellar collisions. The StarCrash code comes with several important features, including:

- Several routines which construct the initial conditions appropriate to a wide variety of physical systems

- An efficient parallel neighbor-finding algorithm for calculating hydrodynamic quantities

- A parallel gravitational field solver based on FFT convolution techniques, which uses the FFTW software libraries

- Relaxation Techniques for single stars and synchronized binaries

- Three different artificial viscosity treatments to calculate the thermodynamic evolution of the matter

- An optional gravitational radiation back-reaction treatment, which calculates the damping force from gravity wave losses to lowest relativistic order in a spatially accurate way

[ascl:1010.075]
Radex: Fast Non-LTE Analysis of Interstellar Line Spectra

The large quantity and high quality of modern radio and infrared line observations require efficient modeling techniques to infer physical and chemical parameters such as temperature, density, and molecular abundances. Radex calculates the intensities of atomic and molecular lines produced in a uniform medium, based on statistical equilibrium calculations involving collisional and radiative processes and including radiation from background sources. Optical depth effects are treated with an escape probability method. The program makes use of molecular data files maintained in the Leiden Atomic and Molecular Database (LAMDA), which will continue to be improved and expanded. The performance of the program is compared with more approximate and with more sophisticated methods. An Appendix provides diagnostic plots to estimate physical parameters from line intensity ratios of commonly observed molecules. This program should form an important tool in analyzing observations from current and future radio and infrared telescopes.

[ascl:1010.076]
Starlab: A Software Environment for Collisional Stellar Dynamics

Traditionally, a simulation of a dense stellar system required choosing an initial model, running an integrator, and analyzing the output. Almost all of the effort went into writing a clever integrator that could handle binaries, triples and encounters between various multiple systems efficiently. Recently, the scope and complexity of these simulations has increased dramatically, for three reasons: 1) the sheer size of the data sets, measured in Terabytes, make traditional 'awking and grepping' of a single output file impractical; 2) the addition of stellar evolution data brings qualitatively new challenges to the data reduction; 3) increased realism of the simulations invites realistic forms of 'SOS': Simulations of Observations of Simulations, to be compared directly with observations. We are now witnessing a shift toward the construction of archives as well as tailored forms of visualization including the use of virtual reality simulators and planetarium domes, and a coupling of both with budding efforts in constructing virtual observatories. This review describes these new trends, presenting Starlab as the first example of a full software environment for realistic large-scale simulations of dense stellar systems.

[ascl:1010.077]
LAMDA: Leiden Atomic and Molecular Database

LAMDA provides users of radiative transfer codes with the basic atomic and molecular data needed for the excitation calculation. Line data of a number of astrophysically interesting species are summarized, including energy levels, statistical weights, Einstein A-coefficients and collisional rate coefficients. Available collisional data from quantum chemical calculations and experiments are in some cases extrapolated to higher energies. Currently the database contains atomic data for 3 species and molecular data for 28 different species. In addition, several isotopomers and deuterated versions are available. This database should form an important tool in analyzing observations from current and future infrared and (sub)millimetre telescopes. Databases such as these rely heavily on the efforts by the chemical physics community to provide the relevant atomic and molecular data. Further efforts in this direction are strongly encouraged so that the current extrapolations of collisional rate coefficients can be replaced by actual calculations in future releases.

RADEX, a computer program for performing statistical equilibrium calculations is made publicly available as part of the data base.

[ascl:1010.078]
AstroMD: A Multi Dimensional Visualization and Analysis Toolkit for Astrophysics

Over the past few years, the role of visualization for scientific purpose has grown up enormously. Astronomy makes an extended use of visualization techniques to analyze data, and scientific visualization has became a fundamental part of modern researches in Astronomy. With the evolution of high performance computers, numerical simulations have assumed a great role in the scientific investigation, allowing the user to run simulation with higher and higher resolution. Data produced in these simulations are often multi-dimensional arrays with several physical quantities. These data are very hard to manage and to analyze efficiently. Consequently the data analysis and visualization tools must follow the new requirements of the research. AstroMD is a tool for data analysis and visualization of astrophysical data and can manage different physical quantities and multi-dimensional data sets. The tool uses virtual reality techniques by which the user has the impression of travelling through a computer-based multi-dimensional model.

[ascl:1010.079]
Geant4: A Simulation Toolkit for the Passage of Particles through Matter

Geant4 is a toolkit for simulating the passage of particles through matter. It includes a complete range of functionality including tracking, geometry, physics models and hits. The physics processes offered cover a comprehensive range, including electromagnetic, hadronic and optical processes, a large set of long-lived particles, materials and elements, over a wide energy range starting, in some cases, from 250eV and extending in others to the TeV energy range. It has been designed and constructed to expose the physics models utilised, to handle complex geometries, and to enable its easy adaptation for optimal use in different sets of applications. The toolkit is the result of a worldwide collaboration of physicists and software engineers. It has been created exploiting software engineering and object-oriented technology and implemented in the C++ programming language. It has been used in applications in particle physics, nuclear physics, accelerator design, space engineering and medical physics.

[ascl:1010.080]
GRACOS: Scalable and Load Balanced P3M Cosmological N-body Code

The GRACOS (GRAvitational COSmology) code, a parallel implementation of the particle-particle/particle-mesh (P3M) algorithm for distributed memory clusters, uses a hybrid method for both computation and domain decomposition. Long-range forces are computed using a Fourier transform gravity solver on a regular mesh; the mesh is distributed across parallel processes using a static one-dimensional slab domain decomposition. Short-range forces are computed by direct summation of close pairs; particles are distributed using a dynamic domain decomposition based on a space-filling Hilbert curve. A nearly-optimal method was devised to dynamically repartition the particle distribution so as to maintain load balance even for extremely inhomogeneous mass distributions. Tests using $800^3$ simulations on a 40-processor beowulf cluster showed good load balance and scalability up to 80 processes. There are limits on scalability imposed by communication and extreme clustering which may be removed by extending the algorithm to include adaptive mesh refinement.

[ascl:1010.081]
MGGPOD: A Monte Carlo Suite for Gamma-Ray Astronomy

We have developed MGGPOD, a user-friendly suite of Monte Carlo codes built around the widely used GEANT (Version 3.21) package. The MGGPOD Monte Carlo suite and documentation are publicly available for download. MGGPOD is an ideal tool for supporting the various stages of gamma-ray astronomy missions, ranging from the design, development, and performance prediction through calibration and response generation to data reduction. In particular, MGGPOD is capable of simulating ab initio the physical processes relevant for the production of instrumental backgrounds. These include the build-up and delayed decay of radioactive isotopes as well as the prompt de-excitation of excited nuclei, both of which give rise to a plethora of instrumental gamma-ray background lines in addition to continuum backgrounds.

[ascl:1010.082]
FLASH: Adaptive Mesh Hydrodynamics Code for Modeling Astrophysical Thermonuclear Flashes

Fryxell, B.; Olson, K.; Ricker, P.; Timmes, F. X.; Zingale, M.; Lamb, D. Q.; MacNeice, P.; Rosner, R.; Truran, J. W.; Tufo, H.

The FLASH code, currently in its 4th version, is a publicly available high performance application code which has evolved into a modular, extensible software system from a collection of unconnected legacy codes. FLASH consists of inter-operable modules that can be combined to generate different applications. The FLASH architecture allows arbitrarily many alternative implementations of its components to co-exist and interchange with each other. A simple and elegant mechanism exists for customization of code functionality without the need to modify the core implementation of the source. A built-in unit test framework combined with regression tests that run nightly on multiple platforms verify the code.

[ascl:1010.083]
MESA: Modules for Experiments in Stellar Astrophysics

Stellar physics and evolution calculations enable a broad range of research in astrophysics. Modules for Experiments in Stellar Astrophysics (MESA) is a suite of open source libraries for a wide range of applications in computational stellar astrophysics. A newly designed 1-D stellar evolution module, MESA star, combines many of the numerical and physics modules for simulations of a wide range of stellar evolution scenarios ranging from very-low mass to massive stars, including advanced evolutionary phases. MESA star solves the fully coupled structure and composition equations simultaneously. It uses adaptive mesh refinement and sophisticated timestep controls, and supports shared memory parallelism based on OpenMP. Independently usable modules provide equation of state, opacity, nuclear reaction rates, and atmosphere boundary conditions. Each module is constructed as a separate Fortran 95 library with its own public interface. Examples include comparisons to other codes and show evolutionary tracks of very low mass stars, brown dwarfs, and gas giant planets; the complete evolution of a 1 Msun star from the pre-main sequence to a cooling white dwarf; the Solar sound speed profile; the evolution of intermediate mass stars through the thermal pulses on the He-shell burning AGB phase; the interior structure of slowly pulsating B Stars and Beta Cepheids; evolutionary tracks of massive stars from the pre-main sequence to the onset of core collapse; stars undergoing Roche lobe overflow; and accretion onto a neutron star.

[ascl:1010.084]
WhiskyMHD: Numerical Code for General Relativistic Magnetohydrodynamics

Whisky is a code to evolve the equations of general relativistic hydrodynamics (GRHD) and magnetohydrodynamics (GRMHD) in 3D Cartesian coordinates on a curved dynamical background. It was originally developed by and for members of the EU Network on Sources of Gravitational Radiation and is based on the Cactus Computational Toolkit. Whisky can also implement adaptive mesh refinement (AMR) if compiled together with Carpet.

Whisky has grown from earlier codes such as GR3D and GRAstro_Hydro, but has been rewritten to take advantage of some of the latest research performed here in the EU. The motivation behind Whisky is to compute gravitational radiation waveforms for systems that involve matter. Examples would include the merger of a binary system containing a neutron star, which are expected to be reasonably common in the universe and expected to produce substantial amounts of radiation. Other possible sources are given in the projects list.

[ascl:1010.085]
Network Tools for Astronomical Data Retrieval

The first step in a science project is the acquisition and understanding of the relevant data. The tools range from simple data transfer methods to more complex browser-emulating scripts. When integrated with a defined sample or catalog, these scripts provide seamless techniques to retrieve and store data of varying types. These tools can be used to leapfrog from website to website to acquire multi-wavelength datasets. This project demonstrates the capability to use multiple data websites, in conjunction, to perform the type of calculations once reserved for on-site datasets.

[ascl:1011.001]
Identikit 1: A Modeling Tool for Interacting Disk Galaxies

By combining test-particle and self-consistent techniques, we have developed a method to rapidly explore the parameter space of galactic encounters. Our method, implemented in an interactive graphics program, can be used to find the parameters required to reproduce the observed morphology and kinematics of interacting disk galaxies. We test this system on an artificial data-set of 36 equal-mass merging encounters, and show that it is usually possible to reproduce the morphology and kinematics of these encounters and that a good match strongly constrains the encounter parameters.

[ascl:1011.002]
DAOSPEC: An Automatic Code for Measuring Equivalent Widths in High-resolution Stellar Spectra

DAOSPEC is a Fortran code for measuring equivalent widths of absorption lines in stellar spectra with minimal human involvement. It works with standard FITS format files and it is designed for use with high resolution (R>15000) and high signal-to-noise-ratio (S/N>30) spectra that have been binned on a linear wavelength scale. First, we review the analysis procedures that are usually employed in the literature. Next, we discuss the principles underlying DAOSPEC and point out similarities and differences with respect to conventional measurement techniques. Then experiments with artificial and real spectra are discussed to illustrate the capabilities and limitations of DAOSPEC, with special attention given to the issues of continuum placement; radial velocities; and the effects of strong lines and line crowding. Finally, quantitative comparisons with other codes and with results from the literature are also presented.

[ascl:1011.003]
ZPEG: An Extension of the Galaxy Evolution Model PEGASE.2

Photometric redshifts are estimated on the basis of template scenarios with the help of the code ZPEG, an extension of the galaxy evolution model PEGASE.2 and available on the PEGASE web site. The spectral energy distribution (SED) templates are computed for nine spectral types including starburst, irregular, spiral and elliptical. Dust, extinction and metal effects are coherently taken into account, depending on evolution scenarios. The sensitivity of results to adding near-infrared colors and IGM absorption is analyzed. A comparison with results of other models without evolution measures the evolution factor which systematically increases the estimated photometric redshift values by $Delta z$ > 0.2 for z > 1.5. Moreover we systematically check that the evolution scenarios match observational standard templates of nearby galaxies, implying an age constraint of the stellar population at z=0 for each type. The respect of this constraint makes it possible to significantly improve the accuracy of photometric redshifts by decreasing the well-known degeneracy problem. The method is applied to the HDF-N sample. From fits on SED templates by a $chi^2$-minimization procedure, not only is the photometric redshift derived but also the corresponding spectral type and the formation redshift $z_for$ when stars first formed. Early epochs of galaxy formation z > 5 are found from this new method and results are compared to faint galaxy count interpretations.

[ascl:1011.004]
MARS: The MAGIC Analysis and Reconstruction Software

Moralejo, R. A.; Gaug, M.; Carmona, E.; Colin, P.; Delgado, C.; Lombardi, S.; Mazin, D.; Scalzotto, V.; Sitarek, J.; Tescaro, D.

With the commissioning of the second MAGIC gamma-ray Cherenkov telescope situated close to MAGIC-I, the standard analysis package of the MAGIC collaboration, MARS, has been upgraded in order to perform the stereoscopic reconstruction of the detected atmospheric showers. MARS is a ROOT-based code written in C++, which includes all the necessary algorithms to transform the raw data recorded by the telescopes into information about the physics parameters of the observed targets. An overview of the methods for extracting the basic shower parameters is presented, together with a description of the tools used in the background discrimination and in the estimation of the gamma-ray source spectra.

[ascl:1011.005]
Shape of Cosmic String Loops

Complicated cosmic string loops will fragment until they reach simple, non-intersecting ("stable") configurations. Through extensive numerical study we characterize these attractor loop shapes including their length, velocity, kink, and cusp distributions. We find that an initial loop containing $M$ harmonic modes will, on average, split into 3M stable loops. These stable loops are approximately described by the degenerate kinky loop, which is planar and rectangular, independently of the number of modes on the initial loop. This is confirmed by an analytic construction of a stable family of perturbed degenerate kinky loops. The average stable loop is also found to have a 40% chance of containing a cusp. We examine the properties of stable loops of different lengths and find only slight variation. Finally we develop a new analytic scheme to explicitly solve the string constraint equations.

[ascl:1011.006]
DAME: A Web Oriented Infrastructure for Scientific Data Mining & Exploration

Brescia, Massimo; Longo, Giuseppe; Djorgovski, George S.; Cavuoti, Stefano; D'Abrusco, Raffaele; Donalek, Ciro; di Guido, Alessandro; Fiore, Michelangelo; Garofalo, Mauro; Laurino, Omar; Mahabal, Ashish; Manna, Francesco; Nocella, Alfonso; D'Angelo, Giovanni; Paolillo, Maurizio

DAME (DAta Mining & Exploration) is an innovative, general purpose, Web-based, VObs compliant, distributed data mining infrastructure specialized in Massive Data Sets exploration with machine learning methods. Initially fine tuned to deal with astronomical data only, DAME has evolved in a general purpose platform which has found applications also in other domains of human endeavor.

[ascl:1011.007]
RAMSES: A new N-body and hydrodynamical code

A new N-body and hydrodynamical code, called RAMSES, is presented. It has been designed to study structure formation in the universe with high spatial resolution. The code is based on Adaptive Mesh Refinement (AMR) technique, with a tree based data structure allowing recursive grid refinements on a cell-by-cell basis. The N-body solver is very similar to the one developed for the ART code (Kravtsov et al. 97), with minor differences in the exact implementation. The hydrodynamical solver is based on a second-order Godunov method, a modern shock-capturing scheme known to compute accurately the thermal history of the fluid component. The accuracy of the code is carefully estimated using various test cases, from pure gas dynamical tests to cosmological ones. The specific refinement strategy used in cosmological simulations is described, and potential spurious effects associated to shock waves propagation in the resulting AMR grid are discussed and found to be negligible. Results obtained in a large N-body and hydrodynamical simulation of structure formation in a low density LCDM universe are finally reported, with 256^3 particles and 4.1 10^7 cells in the AMR grid, reaching a formal resolution of 8192^3. A convergence analysis of different quantities, such as dark matter density power spectrum, gas pressure power spectrum and individual haloes temperature profiles, shows that numerical results are converging down to the actual resolution limit of the code, and are well reproduced by recent analytical predictions in the framework of the halo model.

[ascl:1011.008]
Binsim: Visualising Interacting Binaries in 3D

Binsim produces images of interacting binaries for any system parameters. Though not suitable for modeling light curves or spectra, the resulting images are helpful in visualizing the geometry of a given system and are also helpful in talks and educational work. The code uses the OpenGL API to do the 3D rendering. The software can produce images of cataclysmic variables and X-ray binaries, and can render the mass donor star, an axisymmetric disc (without superhumps, warps or spirals), the accretion stream and hotspot, and a "corona."

[ascl:1011.009]
DRAGON: Monte Carlo Generator of Particle Production from a Fragmented Fireball in Ultrarelativistic Nuclear Collisions

A Monte Carlo generator of the final state of hadrons emitted from an ultrarelativistic nuclear collision is introduced. An important feature of the generator is a possible fragmentation of the fireball and emission of the hadrons from fragments. Phase space distribution of the fragments is based on the blast wave model extended to azimuthally non-symmetric fireballs. Parameters of the model can be tuned and this allows to generate final states from various kinds of fireballs. A facultative output in the OSCAR1999A format allows for a comprehensive analysis of phase-space distributions and/or use as an input for an afterburner. DRAGON's purpose is to produce artificial data sets which resemble those coming from real nuclear collisions provided fragmentation occurs at hadronisation and hadrons are emitted from fragments without any further scattering. Its name, DRAGON, stands for DRoplet and hAdron GeneratOr for Nuclear collisions. In a way, the model is similar to THERMINATOR, with the crucial difference that emission from fragments is included.

[ascl:1011.010]
Global Sky Model (GSM): A Model of Diffuse Galactic Radio Emission from 10 MHz to 100 GHz

de Oliveira-Costa, Angelica; Tegmark, Max; Gaensler, B. M.; Jonas, Justin; Landecker, T. L.; Reich, Patricia

Understanding diffuse Galactic radio emission is interesting both in its own right and for minimizing foreground contamination of cosmological measurements. Cosmic Microwave Background experiments have focused on frequencies > 10 GHz, whereas 21 cm tomography of the high redshift universe will mainly focus on < 0.2 GHz, for which less is currently known about Galactic emission. Motivated by this, we present a global sky model derived from all publicly available total power large-area radio surveys, digitized with optical character recognition when necessary and compiled into a uniform format, as well as the new Villa Elisa data extending the 1.4 GHz map to the entire sky. We quantify statistical and systematic uncertainties in these surveys by comparing them with various global multi-frequency model fits. We find that a principal component based model with only three components can fit the 11 most accurate data sets (at 10, 22, 45 & 408 MHz and 1.4, 2.3, 23, 33, 41, 61, 94 GHz) to an accuracy around 1%-10% depending on frequency and sky region. The data compilation and software returning a predicted all-sky map at any frequency from 10 MHz to 100 GHz are publicly available in the archive file at the link below.

[ascl:1011.011]
turboGL: Accurate Modeling of Weak Lensing

turboGL is a fast Mathematica code based on a stochastic approach to cumulative weak lensing. It can easily compute the lensing PDF relative to arbitrary halo mass distributions, selection biases, number of observations, halo profiles and evolutions, making it a useful tool to study how lensing depends on cosmological parameters and impact on observations.

[ascl:1011.012]
DEFROST: A New Code for Simulating Preheating after Inflation

At the end of inflation, dynamical instability can rapidly deposit the energy of homogeneous cold inflaton into excitations of other fields. This process, known as preheating, is rather violent, inhomogeneous and non-linear, and has to be studied numerically. This paper presents a new code for simulating scalar field dynamics in expanding universe written for that purpose. Compared to available alternatives, it significantly improves both the speed and the accuracy of calculations, and is fully instrumented for 3D visualization. We reproduce previously published results on preheating in simple chaotic inflation models, and further investigate non-linear dynamics of the inflaton decay. Surprisingly, we find that the fields do not want to thermalize quite the way one would think. Instead of directly reaching equilibrium, the evolution appears to be stuck in a rather simple but quite inhomogeneous state. In particular, one-point distribution function of total energy density appears to be universal among various two-field preheating models, and is exceedingly well described by a lognormal distribution. It is tempting to attribute this state to scalar field turbulence.

[ascl:1011.013]
EasyLTB: Code for Testing LTB Models against CosmologyConfronting Lemaitre-Tolman-Bondi Models with Observational Cosmology

The possibility that we live in a special place in the universe, close to the centre of a large void, seems an appealing alternative to the prevailing interpretation of the acceleration of the universe in terms of a LCDM model with a dominant dark energy component. In this paper we confront the asymptotically flat Lemaitre-Tolman-Bondi (LTB) models with a series of observations, from Type Ia Supernovae to Cosmic Microwave Background and Baryon Acoustic Oscillations data. We propose two concrete LTB models describing a local void in which the only arbitrary functions are the radial dependence of the matter density Omega_M and the Hubble expansion rate H. We find that all observations can be accommodated within 1 sigma, for our models with 4 or 5 independent parameters. The best fit models have a chi^2 very close to that of the LCDM model. We perform a simple Bayesian analysis and show that one cannot exclude the hypothesis that we live within a large local void of an otherwise Einstein-de Sitter model.

[ascl:1011.014]
CO5BOLD: COnservative COde for the COmputation of COmpressible COnvection in a BOx of L Dimensions with l=2,3

The code was supplemented with an (optional) MHD version [Schaffenberger et al. (2005)] that can treat magnetic fields. There are also modules for the formation and advection of dust available. The current version now contains the treatment of chemical reaction networks, mostly used for the formation of molecules [Wedemeyer-Böhm et al. (2005)], and hydrogen ionization [Leenaarts & Wedemeyer-Böhm (2005)], too.

Freytag, Bernd; Steffen, Matthias; Wedemeyer-Böhm, Sven; Ludwig, Hans-Günter; Leenaarts, Jorrit; Schaffenberger, Werner; Allard, France; Chiavassa, Andrea; Höfner, Susanne; Kamp, Inga; Steiner, Oskar

CO5BOLD - nickname COBOLD - is the short form of "COnservative COde for the COmputation of COmpressible COnvection in a BOx of L Dimensions with l=2,3''.

It is used to model solar and stellar surface convection. For solar-type stars only a small fraction of the stellar surface layers are included in the computational domain. In the case of red supergiants the computational box contains the entire star. Recently, the model range has been extended to sub-stellar objects (brown dwarfs).

CO5BOLD solves the coupled non-linear equations of compressible hydrodynamics in an external gravity field together with non-local frequency-dependent radiation transport. Operator splitting is applied to solve the equations of hydrodynamics (including gravity), the radiative energy transfer (with a long-characteristics or a short-characteristics ray scheme), and possibly additional 3D (turbulent) diffusion in individual sub steps. The 3D hydrodynamics step is further simplified with directional splitting (usually). The 1D sub steps are performed with a Roe solver, accounting for an external gravity field and an arbitrary equation of state from a table.

The radiation transport is computed with either one of three modules:

- MSrad module: It uses long characteristics. The lateral boundaries have to be periodic. Top and bottom can be closed or open ("solar module'').

- LHDrad module: It uses long characteristics and is restricted to an equidistant grid and open boundaries at all surfaces (old "supergiant module'').

- SHORTrad module: It uses short characteristics and is restricted to an equidistant grid and open boundaries at all surfaces (new "supergiant module'').

The code was supplemented with an (optional) MHD version [Schaffenberger et al. (2005)] that can treat magnetic fields. There are also modules for the formation and advection of dust available. The current version now contains the treatment of chemical reaction networks, mostly used for the formation of molecules [Wedemeyer-Böhm et al. (2005)], and hydrogen ionization [Leenaarts & Wedemeyer-Böhm (2005)], too.

CO5BOLD is written in Fortran90. The parallelization is done with OpenMP directives.

[ascl:1011.015]
Geokerr: Computing Photon Orbits in a Kerr Spacetime

Relativistic radiative transfer problems require the calculation of photon trajectories in curved spacetime. Programmed in Fortran, Geokerr uses a novel technique for rapid and accurate calculation of null geodesics in the Kerr metric. The equations of motion from the Hamilton-Jacobi equation are reduced directly to Carlson's elliptic integrals, simplifying algebraic manipulations and allowing all coordinates to be computed semi-analytically for the first time.

[ascl:1011.016]
Non-LTE Models and Theoretical Spectra of Accretion Disks in Active Galactic Nuclei. III. Integrated Spectra for Hydrogen-Helium Disks

We have constructed a grid of non-LTE disk models for a wide range of black hole mass and mass accretion rate, for several values of viscosity parameter alpha, and for two extreme values of the black hole spin: the maximum-rotation Kerr black hole, and the Schwarzschild (non-rotating) black hole. Our procedure calculates self-consistently the vertical structure of all disk annuli together with the radiation field, without any approximations imposed on the optical thickness of the disk, and without any ad hoc approximations to the behavior of the radiation intensity. The total spectrum of a disk is computed by summing the spectra of the individual annuli, taking into account the general relativistic transfer function. The grid covers nine values of the black hole mass between M = 1/8 and 32 billion solar masses with a two-fold increase of mass for each subsequent value; and eleven values of the mass accretion rate, each a power of 2 times 1 solar mass/year. The highest value of the accretion rate corresponds to 0.3 Eddington. We show the vertical structure of individual annuli within the set of accretion disk models, along with their local emergent flux, and discuss the internal physical self-consistency of the models. We then present the full disk-integrated spectra, and discuss a number of observationally interesting properties of the models, such as optical/ultraviolet colors, the behavior of the hydrogen Lyman limit region, polarization, and number of ionizing photons. Our calculations are far from definitive in terms of the input physics, but generally we find that our models exhibit rather red optical/UV colors. Flux discontinuities in the region of the hydrogen Lyman limit are only present in cool, low luminosity models, while hotter models exhibit blueshifted changes in spectral slope.

[ascl:1011.017]
Occultation and Microlensing

Occultation and microlensing are different limits of the same phenomena of one body passing in front of another body. We derive a general exact analytic expression which describes both microlensing and occultation in the case of spherical bodies with a source of uniform brightness and a non-relativistic foreground body. We also compute numerically the case of a source with quadratic limb-darkening. In the limit that the gravitational deflection angle is comparable to the angular size of the foreground body, both microlensing and occultation occur as the objects align. Such events may be used to constrain the size ratio of the lens and source stars, the limb-darkening coefficients of the source star, and the surface gravity of the lens star (if the lens and source distances are known). Application of these results to microlensing during transits in binaries and giant-star microlensing are discussed. These results unify the microlensing and occultation limits and should be useful for rapid model fitting of microlensing, eclipse, and "microccultation" events.

[ascl:1011.018]
Transit of a Spherical Planet of a Stellar Chromosphere which is Geometrically Thin

Transit light curves for stellar continua have only one minimum and a "U" shape. By contrast, transit curves for optically thin chromospheric emission lines can have a "W" shape because of stellar limb-brightening. We calculate light curves for an optically thin shell of emission and fit these models to time-resolved observations of Si IV absorption by the planet HD209458b. We find that the best fit Si IV absorption model has R_p,SIV/R_*= 0.34+0.07-0.12, similar to the Roche lobe of the planet. While the large radius is only at the limit of statistical significance, we develop formulae applicable to transits of all optically thin chromospheric emission lines.

[ascl:1011.019]
FLY: MPI-2 High Resolution code for LSS Cosmological Simulations

Cosmological simulations of structures and galaxies formations have played a fundamental role in the study of the origin, formation and evolution of the Universe. These studies improved enormously with the use of supercomputers and parallel systems and, recently, grid based systems and Linux clusters. Now we present the new version of the tree N-body parallel code FLY that runs on a PC Linux Cluster using the one side communication paradigm MPI-2 and we show the performances obtained. FLY is included in the Computer Physics Communication Program Library. This new version was developed using the Linux Cluster of CINECA, an IBM Cluster with 1024 Intel Xeon Pentium IV 3.0 Ghz. The results show that it is possible to run a 64 Million particle simulation in less than 15 minutes for each timestep, and the code scalability with the number of processors is achieved. This lead us to propose FLY as a code to run very large N-Body simulations with more than $10^{9}$ particles with the higher resolution of a pure tree code.

[ascl:1011.020]
VisIVO: Integrated Tools and Services for Large-Scale Astrophysical Visualization

Becciani, U.; Costa, A.; Antonuccio-Delogu, V.; Caniglia, G.; Comparato, M.; Gheller, C.; Jin, Z.; Krokos, M.; Massimino, P.

VisIVO is an integrated suite of tools and services specifically designed for the Virtual Observatory. This suite constitutes a software framework for effective visual discovery in currently available (and next-generation) very large-scale astrophysical datasets. VisIVO consists of VisiVO Desktop - a stand alone application for interactive visualization on standard PCs, VisIVO Server - a grid-enabled platform for high performance visualization and VisIVO Web - a custom designed web portal supporting services based on the VisIVO Server functionality. The main characteristic of VisIVO is support for high-performance, multidimensional visualization of very large-scale astrophysical datasets. Users can obtain meaningful visualizations rapidly while preserving full and intuitive control of the relevant visualization parameters. This paper focuses on newly developed integrated tools in VisIVO Server allowing intuitive visual discovery with 3D views being created from data tables. VisIVO Server can be installed easily on any web server with a database repository. We discuss briefly aspects of our implementation of VisiVO Server on a computational grid and also outline the functionality of the services offered by VisIVO Web. Finally we conclude with a summary of our work and pointers to future developments.

[ascl:1011.021]
GRALE: A genetic algorithm for the non-parametric inversion of strong lensing systems

We present a non-parametric technique to infer the projected-mass distribution of a gravitational lens system with multiple strong-lensed images. The technique involves a dynamic grid in the lens plane on which the mass distribution of the lens is approximated by a sum of basis functions, one per grid cell. We used the projected mass densities of Plummer spheres as basis functions. A genetic algorithm then determines the mass distribution of the lens by forcing images of a single source, projected back onto the source plane, to coincide as well as possible. Averaging several tens of solutions removes the random fluctuations that are introduced by the reproduction process of genomes in the genetic algorithm and highlights those features common to all solutions. Given the positions of the images and the redshifts of the sources and the lens, we show that the mass of a gravitational lens can be retrieved with an accuracy of a few percent and that, if the sources sufficiently cover the caustics, the mass distribution of the gravitational lens can also be reliably retrieved. A major advantage of the algorithm is that it makes full use of the information contained in the radial images, unlike methods that minimise the residuals of the lens equation, and is thus able to accurately reconstruct also the inner parts of the lens.

[ascl:1011.022]
yt: A Multi-Code Analysis Toolkit for Astrophysical Simulation Data

yt is an open source, community-developed volumetric analysis and visualization toolkit. Originally designed for handling Enzo's (ascl:1010.072) structure adaptive mesh refinement (AMR) data, yt has been extended to work with numerous simulation methods and simulation codes including Orion, RAMSES (ascl:1011.007), and FLASH (ascl:1010.082). Analysis and visualization with yt are oriented around physically relevant quantities rather than quantities native to data representation on-disk or in-memory. yt can be used for projections, multivariate volume rendering, multi-dimensional histograms, halo finding, light cone generation and topologically-connected isocontour identification.

yt benefits from the contributions of a broad range of community members, and a full list of credits for the code can be found on the yt website or in the source repository.

[ascl:1011.023]
HyRec: A Fast and Highly Accurate Primordial Hydrogen and Helium Recombination Code

We present a state-of-the-art primordial recombination code, HyRec, including all the physical effects that have been shown to significantly affect recombination. The computation of helium recombination includes simple analytic treatments of hydrogen continuum opacity in the He I 2 1P - 1 1S line, the He I] 2 3P - 1 1S line, and treats feedback between these lines within the on-the-spot approximation. Hydrogen recombination is computed using the effective multilevel atom method, virtually accounting for an infinite number of excited states. We account for two-photon transitions from 2s and higher levels as well as frequency diffusion in Lyman-alpha with a full radiative transfer calculation. We present a new method to evolve the radiation field simultaneously with the level populations and the free electron fraction. These computations are sped up by taking advantage of the particular sparseness pattern of the equations describing the radiative transfer. The computation time for a full recombination history is ~2 seconds. This makes our code well suited for inclusion in Monte Carlo Markov chains for cosmological parameter estimation from upcoming high-precision cosmic microwave background anisotropy measurements.

[ascl:1101.001]
Second-order Tight-coupling Code

Prior to recombination photons, electrons, and atomic nuclei rapidly scattered and behaved, almost, like a single tightly-coupled photon-baryon plasma. In order to solve the cosmological perturbation equations during that time, Cosmic Microwave Background (CMB) codes use the so-called tight-coupling approximation in which the problematic terms (i.e. the source of the stiffness) are expanded in inverse powers of the Thomson Opacity. Most codes only keep the terms linear in the inverse Thomson Opacity. We have developed a second-order tight-coupling code to test the validity of the usual first-order tight-coupling code. It is based on the publicly available code CAMB.

[ascl:1101.002]
NDSPMHD Smoothed Particle Magnetohydrodynamics Code

This paper presents an overview and introduction to Smoothed Particle Hydrodynamics and Magnetohydrodynamics in theory and in practice. Firstly, we give a basic grounding in the fundamentals of SPH, showing how the equations of motion and energy can be self-consistently derived from the density estimate. We then show how to interpret these equations using the basic SPH interpolation formulae and highlight the subtle difference in approach between SPH and other particle methods. In doing so, we also critique several `urban myths' regarding SPH, in particular the idea that one can simply increase the `neighbour number' more slowly than the total number of particles in order to obtain convergence. We also discuss the origin of numerical instabilities such as the pairing and tensile instabilities. Finally, we give practical advice on how to resolve three of the main issues with SPMHD: removing the tensile instability, formulating dissipative terms for MHD shocks and enforcing the divergence constraint on the particles, and we give the current status of developments in this area. Accompanying the paper is the first public release of the NDSPMHD SPH code, a 1, 2 and 3 dimensional code designed as a testbed for SPH/SPMHD algorithms that can be used to test many of the ideas and used to run all of the numerical examples contained in the paper.

[ascl:1101.003]
IGMtransfer: Intergalactic Radiative Transfer Code

This document describes the publically available numerical code "IGMtransfer", capable of performing intergalactic radiative transfer (RT) of light in the vicinity of the Lyman alpha (Lya) line. Calculating the RT in a (possibly adaptively refined) grid of cells resulting from a cosmological simulation, the code returns 1) a "transmission function", showing how the intergalactic medium (IGM) affects the Lya line at a given redshift, and 2) the "average transmission" of the IGM, making it useful for studying the results of reionization simulations.

[ascl:1101.004]
InterpMC: Caching and Interpolated Likelihoods -- Accelerating Cosmological Monte Carlo Markov Chains

We describe a novel approach to accelerating Monte Carlo Markov Chains. Our focus is cosmological parameter estimation, but the algorithm is applicable to any problem for which the likelihood surface is a smooth function of the free parameters and computationally expensive to evaluate. We generate a high-order interpolating polynomial for the log-likelihood using the first points gathered by the Markov chains as a training set. This polynomial then accurately computes the majority of the likelihoods needed in the latter parts of the chains. We implement a simple version of this algorithm as a patch (InterpMC) to CosmoMC and show that it accelerates parameter estimatation by a factor of between two and four for well-converged chains. The current code is primarily intended as a "proof of concept", and we argue that there is considerable room for further performance gains. Unlike other approaches to accelerating parameter fits, we make no use of precomputed training sets or special choices of variables, and InterpMC is almost entirely transparent to the user.

[ascl:1101.005]
CMHOG: Code for Ideal Compressible Hydrodynamics

CMHOG (Connection Machine Higher Order Godunov) is a code for ideal compressible hydrodynamics based on the Lagrange-plus-remap version of the piecewise parabolic method (PPM) of Colella & Woodward (1984, J. Comp. Phys., 74, 1). It works in one-, two- or three-dimensional Cartesian coordinates with either an adiabatic or isothermal equation of state. A limited amount of extra physics has been added using operator splitting, including optically-thin radiative cooling, and chemistry for combustion simulations.

[ascl:1101.006]
NIRVANA: A Numerical Tool for Astrophysical Gas Dynamics

The NIRVANA code is capable of the simulation of multi-scale self-gravitational magnetohydrodynamics problems in three space dimensions employing the technique of adaptive mesh refinement. The building blocks of NIRVANA are (i) a fully conservative, divergence-free Godunov-type central scheme for the solution of the equations of magnetohydrodynamics; (ii) a block-structured mesh refinement algorithm which automatically adds and removes elementary grid blocks whenever necessary to achieve adequate resolution and; (iii) an adaptive mesh Poisson solver based on multigrid philosophy which incorporates the so-called elliptic matching condition to keep the gradient of the gravitational potential continous at fine/coarse mesh interfaces.

[ascl:1101.007]
Galaxia: A Code to Generate a Synthetic Survey of the Milky Way

We present here a fast code for creating a synthetic survey of the Milky Way. Given one or more color-magnitude bounds, a survey size and geometry, the code returns a catalog of stars in accordance with a given model of the Milky Way. The model can be specified by a set of density distributions or as an N-body realization. We provide fast and efficient algorithms for sampling both types of models. As compared to earlier sampling schemes which generate stars at specified locations along a line of sight, our scheme can generate a continuous and smooth distribution of stars over any given volume. The code is quite general and flexible and can accept input in the form of a star formation rate, age metallicity relation, age velocity dispersion relation and analytic density distribution functions. Theoretical isochrones are then used to generate a catalog of stars and support is available for a wide range of photometric bands. As a concrete example we implement the Besancon Milky Way model for the disc. For the stellar halo we employ the simulated stellar halo N-body models of Bullock & Johnston (2005). In order to sample N-body models, we present a scheme that disperses the stars spawned by an N-body particle, in such a way that the phase space density of the spawned stars is consistent with that of the N-body particles. The code is ideally suited to generating synthetic data sets that mimic near future wide area surveys such as GAIA, LSST and HERMES. As an application we study the prospect of identifying structures in the stellar halo with a simulated GAIA survey.

[ascl:1101.008]
CRASH: A Block-Adaptive-Mesh Code for Radiative Shock Hydrodynamics

van der Holst, B.; Toth, G.; Sokolov, I. V.; Powell, K. G.; Holloway, J. P.; Myra, E. S.; Stout, Q.; Adams, M. L.; Morel, J. E.; Drake, R. P.

We describe the CRASH (Center for Radiative Shock Hydrodynamics) code, a block adaptive mesh code for multi-material radiation hydrodynamics. The implementation solves the radiation diffusion model with the gray or multigroup method and uses a flux limited diffusion approximation to recover the free-streaming limit. The electrons and ions are allowed to have different temperatures and we include a flux limited electron heat conduction. The radiation hydrodynamic equations are solved in the Eulerian frame by means of a conservative finite volume discretization in either one, two, or three-dimensional slab geometry or in two-dimensional cylindrical symmetry. An operator split method is used to solve these equations in three substeps: (1) solve the hydrodynamic equations with shock-capturing schemes, (2) a linear advection of the radiation in frequency-logarithm space, and (3) an implicit solve of the stiff radiation diffusion, heat conduction, and energy exchange. We present a suite of verification test problems to demonstrate the accuracy and performance of the algorithms. The CRASH code is an extension of the Block-Adaptive Tree Solarwind Roe Upwind Scheme (BATS-R-US) code with this new radiation transfer and heat conduction library and equation-of-state and multigroup opacity solvers. Both CRASH and BATS-R-US are part of the publicly available Space Weather Modeling Framework (SWMF).

[ascl:1101.009]
MasQU: Finite Differences on Masked Irregular Stokes Q,U Grids

The detection of B-mode polarization in the CMB is one of the most important outstanding tests of inflationary cosmology. One of the necessary steps for extracting polarization information in the CMB is reducing contamination from so-called "ambiguous modes" on a masked sky, which contain leakage from the larger E-mode signal. This can be achieved by utilising derivative operators on the real-space Stokes Q and U parameters. This paper presents an algorithm and a software package to perform this procedure on the nearly full sky, i.e., with projects such as the Planck Surveyor and future satellites in mind; in particular, the package can perform finite differences on masked, irregular grids and is applied to a semi-regular spherical pixellization, the HEALPix grid. The formalism reduces to the known finite-difference solutions in the case of a regular grid. We quantify full-sky improvements on the possible bounds on the CMB B-mode signal. We find that in the specific case of E and B-mode separation, there exists a "pole problem" in our formalism which produces signal contamination at very low multipoles l. Several solutions to the "pole problem" are presented; one proposed solution facilitates a calculation of a general Gaussian quadrature scheme, which finds application in calculating accurate harmonic coefficients on the HEALPix sphere. Nevertheless, on a masked sphere the software represents a considerable reduction in B-mode noise from limited sky coverage.

[ascl:1101.010]
TOPCAT: Tool for OPerations on Catalogues And Tables

TOPCAT is an interactive graphical viewer and editor for tabular data. Its aim is to provide most of the facilities that astronomers need for analysis and manipulation of source catalogues and other tables, though it can be used for non-astronomical data as well. It understands a number of different astronomically important formats (including FITS and VOTable) and more formats can be added.

It offers a variety of ways to view and analyse tables, including a browser for the cell data themselves, viewers for information about table and column metadata, and facilities for 1-, 2-, 3- and higher-dimensional visualisation, calculating statistics and joining tables using flexible matching algorithms. Using a powerful and extensible Java-based expression language new columns can be defined and row subsets selected for separate analysis. Table data and metadata can be edited and the resulting modified table can be written out in a wide range of output formats.

It is a stand-alone application which works quite happily with no network connection. However, because it uses Virtual Observatory (VO) standards, it can cooperate smoothly with other tools in the VO world and beyond, such as VODesktop, Aladin and ds9. Between 2006 and 2009 TOPCAT was developed within the AstroGrid project, and is offered as part of a standard suite of applications on the AstroGrid web site, where you can find information on several other VO tools.

The program is written in pure Java and available under the GNU General Public Licence. It has been developed in the UK within the Starlink and AstroGrid projects, and under PPARC and STFC grants. Its underlying table processing facilities are provided by STIL.

[ascl:1102.001]
N-MODY: A Code for Collisionless N-body Simulations in Modified Newtonian Dynamics

N-MODY is a parallel particle-mesh code for collisionless N-body simulations in modified Newtonian dynamics (MOND). N-MODY is based on a numerical potential solver in spherical coordinates that solves the non-linear MOND field equation, and is ideally suited to simulate isolated stellar systems. N-MODY can be used also to compute the MOND potential of arbitrary static density distributions. A few applications of N-MODY indicate that some astrophysically relevant dynamical processes are profoundly different in MOND and in Newtonian gravity with dark matter.

[ascl:1102.002]
PBL: Particle-Based Lensing for Gravitational Lensing Mass Reconstructions of Galaxy Clusters

We present Particle-Based Lensing (PBL), a new technique for gravitational lensing mass reconstructions of galaxy clusters. Traditionally, most methods have employed either a finite inversion or gridding to turn observational lensed galaxy ellipticities into an estimate of the surface mass density of a galaxy cluster. We approach the problem from a different perspective, motivated by the success of multi-scale analysis in smoothed particle hydrodynamics. In PBL, we treat each of the lensed galaxies as a particle and then reconstruct the potential by smoothing over a local kernel with variable smoothing scale. In this way, we can tune a reconstruction to produce constant signal-noise throughout, and maximally exploit regions of high information density.

PBL is designed to include all lensing observables, including multiple image positions and fluxes from strong lensing, as well as weak lensing signals including shear and flexion. In this paper, however, we describe a shear-only reconstruction, and apply the method to several test cases, including simulated lensing clusters, as well as the well-studied ``Bullet Cluster'' (1E0657-56). In the former cases, we show that PBL is better able to identify cusps and substructures than are grid-based reconstructions, and in the latter case, we show that PBL is able to identify substructure in the Bullet Cluster without even exploiting strong lensing measurements.

[ascl:1102.003]
GRAVLENS: Computational Methods for Gravitational Lensing

Modern applications of strong gravitational lensing require the ability to use precise and varied observational data to constrain complex lens models. Two sets of computational methods for lensing calculations are discussed. The first is a new algorithm for solving the lens equation for general mass distributions. This algorithm makes it possible to apply arbitrarily complicated models to observed lenses. The second is an evaluation of techniques for using observational data including positions, fluxes, and time delays of point-like images, as well as maps of extended images, to constrain models of strong lenses. The techniques presented here are implemented in a flexible and user-friendly software package called gravlens, which is made available to the community.

[ascl:1102.004]
LENSTOOL: A Gravitational Lensing Software for Modeling Mass Distribution of Galaxies and Clusters (strong and weak regime)

We describe a procedure for modelling strong lensing galaxy clusters with parametric methods, and to rank models quantitatively using the Bayesian evidence. We use a publicly available Markov chain Monte-Carlo (MCMC) sampler ('Bayesys'), allowing us to avoid local minima in the likelihood functions. To illustrate the power of the MCMC technique, we simulate three clusters of galaxies, each composed of a cluster-scale halo and a set of perturbing galaxy-scale subhalos. We ray-trace three light beams through each model to produce a catalogue of multiple images, and then use the MCMC sampler to recover the model parameters in the three different lensing configurations. We find that, for typical Hubble Space Telescope (HST)-quality imaging data, the total mass in the Einstein radius is recovered with ~1-5% error according to the considered lensing configuration. However, we find that the mass of the galaxies is strongly degenerated with the cluster mass when no multiple images appear in the cluster centre. The mass of the galaxies is generally recovered with a 20% error, largely due to the poorly constrained cut-off radius. Finally, we describe how to rank models quantitatively using the Bayesian evidence. We confirm the ability of strong lensing to constrain the mass profile in the central region of galaxy clusters in this way. Ultimately, such a method applied to strong lensing clusters with a very large number of multiple images may provide unique geometrical constraints on cosmology.

[ascl:1102.005]
MRLENS: Multi-Resolution methods for gravitational LENSing

The MRLENS package offers a new method for the reconstruction of weak lensing mass maps. It uses the multiscale entropy concept, which is based on wavelets, and the False Discovery Rate which allows us to derive robust detection levels in wavelet space. We show that this new restoration approach outperforms several standard techniques currently used for weak shear mass reconstruction. This method can also be used to separate E and B modes in the shear field, and thus test for the presence of residual systematic effects. We concentrate on large blind cosmic shear surveys, and illustrate our results using simulated shear maps derived from N-Body Lambda-CDM simulations with added noise corresponding to both ground-based and space-based observations.

[ascl:1102.006]
NBODY Codes: Numerical Simulations of Many-body (N-body) Gravitational Interactions

I review the development of direct N-body codes at Cambridge over nearly 40 years, highlighting the main stepping stones. The first code (NBODY1) was based on the simple concepts of a force polynomial combined with individual time steps, where numerical problems due to close encounters were avoided by a softened potential. Fortuitously, the elegant Kustaanheimo-Stiefel two-body regularization soon permitted small star clusters to be studied (NBODY3). Subsequent extensions to unperturbed three-body and four-body regularization proved beneficial in dealing with multiple interactions. Investigations of larger systems became possible with the Ahmad-Cohen neighbor scheme which was used more than 20 years ago for expanding universe models of 4000 galaxies (NBODY2). Combining the neighbor scheme with the regularization procedures enabled more realistic star clusters to be considered (NBODY5). After a period of simulations with no apparent technical progress, chain regularization replaced the treatment of compact subsystems (NBODY3, NBODY5). More recently, the Hermite integration method provided a major advance and has been implemented on the special-purpose HARP computers (NBODY4) together with an alternative version for workstations and supercomputers (NBODY6). These codes also include a variety of algorithms for stellar evolution based on fast lookup functions. The treatment of primordial binaries contains efficient procedures for chaotic two-body motion as well as tidal circularization, and special attention is paid to hierarchical systems and their stability. This family of N-body codes constitutes a powerful tool for dynamical simulations which is freely available to the astronomical community, and the massive effort owes much to collaborators.

[ascl:1102.007]
PixeLens: A Portable Modeler of Lensed Quasars

We introduce and implement two novel ideas for modeling lensed quasars. The first is to require different lenses to agree about H_{0}. This means that some models for one lens can be ruled out by data on a different lens. We explain using two worked examples. One example models 1115+080 and 1608+656 (time-delay quadruple systems) and 1933+503 (a prospective time-delay system) all together, yielding time-delay predictions for the third lens and a 90% confidence estimate of H_{0}^{-1}=14.6+9.4-1.7 Gyr (H_{0}=67+9-26 km s^{-1} Mpc^{-1}) assuming ΩM=0.3 and Ω_{Λ}=0.7. The other example models the time-delay doubles 1520+530, 1600+434, 1830-211, and 2149-275, which gives H_{0}^{-1}=14.5+3.3-1.5 Gyr (H_{0}=67+8-13 km s^{-1} Mpc^{-1}). Our second idea is to write the modeling software as a highly interactive Java applet, which can be used both for coarse-grained results inside a browser and for fine-grained results on a workstation. Several obstacles come up in trying to implement a numerically intensive method thus, but we overcome them.

[ascl:1102.008]
PMFAST: Towards Optimal Parallel PM N-body Codes

The parallel PM N-body code PMFAST is cost-effective and memory-efficient. PMFAST is based on a two-level mesh gravity solver where the gravitational forces are separated into long and short range components. The decomposition scheme minimizes communication costs and allows tolerance for slow networks. The code approaches optimality in several dimensions. The force computations are local and exploit highly optimized vendor FFT libraries. It features minimal memory overhead, with the particle positions and velocities being the main cost. The code features support for distributed and shared memory parallelization through the use of MPI and OpenMP, respectively.

The current release version uses two grid levels on a slab decomposition, with periodic boundary conditions for cosmological applications. Open boundary conditions could be added with little computational overhead. Timing information and results from a recent cosmological production run of the code using a 3712^3 mesh with 6.4 x 10^9 particles are available.

[ascl:1102.009]
AHF: Amiga's Halo Finder

Cosmological simulations are the key tool for investigating the different processes involved in the formation of the universe from small initial density perturbations to galaxies and clusters of galaxies observed today. The identification and analysis of bound objects, halos, is one of the most important steps in drawing useful physical information from simulations. In the advent of larger and larger simulations, a reliable and parallel halo finder, able to cope with the ever-increasing data files, is a must. In this work we present the freely available MPI parallel halo finder AHF. We provide a description of the algorithm and the strategy followed to handle large simulation data. We also describe the parameters a user may choose in order to influence the process of halo finding, as well as pointing out which parameters are crucial to ensure untainted results from the parallel approach. Furthermore, we demonstrate the ability of AHF to scale to high-resolution simulations.

[ascl:1102.010]
SEREN: A SPH code for star and planet formation simulations

Hubber, David; Batty, Chris; McLeod, Andrew; Whitworth, Anthony; Bisbas, Thomas; Stamatellos, Dimitrios; Walch, Stefanie; Rawiraswattana, Krisada; Goodwin, Simon

SEREN is an astrophysical Smoothed Particle Hydrodynamics code designed to investigate star and planet formation problems using self-gravitating hydrodynamics simulations of molecular clouds, star-forming cores, and protostellar disks.

SEREN is written in Fortran 95/2003 with a modular philosophy for adding features into the code. Each feature can be easily activated or deactivated by way of setting options in the Makefile before compiling the code. This has the added benefit of allowing unwanted features to be removed at the compilation stage resulting in a smaller and faster executable program. SEREN is written with OpenMP directives to allow parallelization on shared-memory architecture.

[ascl:1102.011]
Identikit 2: An Algorithm for Reconstructing Galactic Collisions

Using a combination of self-consistent and test-particle techniques, Identikit 1 provided a way to vary the initial geometry of a galactic collision and instantly visualize the outcome. Identikit 2 uses the same techniques to define a mapping from the current morphology and kinematics of a tidal encounter back to the initial conditions. By requiring that various regions along a tidal feature all originate from a single disc with a unique orientation, this mapping can be used to derive the initial collision geometry. In addition, Identikit 2 offers a robust way to measure how well a particular model reproduces the morphology and kinematics of a pair of interacting galaxies. A set of eight self-consistent simulations is used to demonstrate the algorithm's ability to search a ten-dimensional parameter space and find near-optimal matches; all eight systems are successfully reconstructed.

[ascl:1102.012]
CPROPS: Bias-free Measurement of Giant Molecular Cloud Properties

CPROPS, written in IDL, processes FITS data cubes containing molecular line emission and returns the properties of molecular clouds contained within it. Without corrections for the effects of beam convolution and sensitivity to GMC properties, the resulting properties may be severely biased. This is particularly true for extragalactic observations, where resolution and sensitivity effects often bias measured values by 40% or more. We correct for finite spatial and spectral resolutions with a simple deconvolution and we correct for sensitivity biases by extrapolating properties of a GMC to those we would expect to measure with perfect sensitivity. The resulting method recovers the properties of a GMC to within 10% over a large range of resolutions and sensitivities, provided the clouds are marginally resolved with a peak signal-to-noise ratio greater than 10. We note that interferometers systematically underestimate cloud properties, particularly the flux from a cloud. The degree of bias depends on the sensitivity of the observations and the (u,v) coverage of the observations. In the Appendix to the paper we present a conservative, new decomposition algorithm for identifying GMCs in molecular-line observations. This algorithm treats the data in physical rather than observational units, does not produce spurious clouds in the presence of noise, and is sensitive to a range of morphologies. As a result, the output of this decomposition should be directly comparable among disparate data sets.

The CPROPS package contains within it a distribution of the CLUMPFIND code written by Jonathan Williams and described in Williams, de Geus, and Blitz(1994). The package is available as a stand alone package. If you make use of the CLUMPFIND functionality in the CPROPS package for a publication, please cite Jonathan's original article.

[ascl:1102.013]
Cactus: HPC infrastructure and programming tools

Cactus provides computational scientists and engineers with a collaborative, modular and portable programming environment for parallel high performance computing. Cactus can make use of many other technologies for HPC, such as Samrai, HDF5, PETSc and PAPI, and several application domains such as numerical relativity, computational fluid dynamics and quantum gravity are developing open community toolkits for Cactus.

[ascl:1102.014]
Einstein Toolkit for Relativistic Astrophysics

The Einstein Toolkit is a collection of software components and tools for simulating and analyzing general relativistic astrophysical systems. Such systems include gravitational wave space-times, collisions of compact objects such as black holes or neutron stars, accretion onto compact objects, core collapse supernovae and Gamma-Ray Bursts.

The Einstein Toolkit builds on numerous software efforts in the numerical relativity community including CactusEinstein, Whisky, and Carpet. The Einstein Toolkit currently uses the Cactus Framework as the underlying computational infrastructure that provides large-scale parallelization, general computational components, and a model for collaborative, portable code development.

[ascl:1102.015]
PMFASTIC: Initial condition generator for PMFAST

PMFASTIC is a parallel initial condition generator, a slab decomposition Fortran 90 parallel cosmological initial condition generator for use with PMFAST. Files required for generating initial dark matter particle distributions and instructions are included, however one would require CMBFAST to create alternative transfer functions.

[ascl:1102.016]
HERACLES: 3D Hydrodynamical Code to Simulate Astrophysical Fluid Flows

Audit, Edouard; González, Matthias; Vaytet, Neil; Fromang, Sebastien; Hennebelle, Patrick; Teyssier, Romain; Tremblin, Pascal; Thooris, Bruno

HERACLES is a 3D hydrodynamical code used to simulate astrophysical fluid flows. It uses a finite volume method on fixed grids to solve the equations of hydrodynamics, MHD, radiative transfer and gravity. This software is developed at the Service d'Astrophysique, CEA/Saclay as part of the COAST project and is registered under the CeCILL license. HERACLES simulates astrophysical fluid flows using a grid based Eulerian finite volume Godunov method. It is capable of simulating pure hydrodynamical flows, magneto-hydrodynamic flows, radiation hydrodynamic flows (using either flux limited diffusion or the M1 moment method), self-gravitating flows using a Poisson solver or all of the above. HERACLES uses cartesian, spherical and cylindrical grids.

[ascl:1102.017]
FARGO: Fast Advection in Rotating Gaseous Objects

FARGO is an efficient and simple modification of the standard transport algorithm used in explicit eulerian fixed polar grid codes, aimed at getting rid of the average azimuthal velocity when applying the Courant condition. This results in a much larger timestep than the usual procedure, and it is particularly well-suited to the description of a Keplerian disk where one is traditionally limited by the very demanding Courant condition on the fast orbital motion at the inner boundary. In this modified algorithm, the timestep is limited by the perturbed velocity and by the shear arising from the differential rotation. The speed-up resulting from the use of the FARGO algorithm is problem dependent. In the example presented in the code paper below, which shows the evolution of a Jupiter sized protoplanet embedded in a minimum mass protoplanetary nebula, the FARGO algorithm is about an order of magnitude faster than a traditional transport scheme, with a much smaller numerical diffusivity.

[ascl:1102.018]
Karma: Visualisation Test-Bed Toolkit

Karma is a toolkit for interprocess communications, authentication, encryption, graphics display, user interface and manipulating the Karma network data structure. It contains KarmaLib (the structured libraries and API) and a large number of modules (applications) to perform many standard tasks. A suite of visualisation tools are distributed with the library.

[ascl:1102.019]
HOP: A Group-finding Algorithm for N-body Simulations

We describe a new method (HOP) for identifying groups of particles in N-body simulations. Having assigned to every particle an estimate of its local density, we associate each particle with the densest of the Nh particles nearest to it. Repeating this process allows us to trace a path, within the particle set itself, from each particle in the direction of increasing density. The path ends when it reaches a particle that is its own densest neighbor; all particles reaching the same such particle are identified as a group. Combined with an adaptive smoothing kernel for finding the densities, this method is spatially adaptive, coordinate-free, and numerically straight-forward. One can proceed to process the output by truncating groups at a particular density contour and combining groups that share a (possibly different) density contour. While the resulting algorithm has several user-chosen parameters, we show that the results are insensitive to most of these, the exception being the outer density cutoff of the groups.

[ascl:1102.020]
SKID: Finding Gravitationally Bound Groups in N-body Simulations

SKID finds gravitationally bound groups in N-body simulations. The SKID program will group different types of particles depending on the type of input binary file. This could be either dark matter particles, gas particles, star particles or gas and star particles depending on what is in the input tipsy binary file. Once groups with at least a certain minimum number of members have been determined, SKID will remove particles which are not bound to the group. SKID must use the original positions of all the particles to determine whether or not particles are bound. This procedure which we call unbinding, is again dependent on the type of grouping we are dealing with. There are two cases, one for dark matter only or star particles only (case 1 unbinding), the other for inputs including gas (also stars in a dark matter environment this is case 2 unbinding).

Skid version 1.3 is a much improved version of the old denmax-1.1 version. The new name was given to avoid confusion with the DENMAX program of Gelb & Bertschinger, and although it is based on the same idea it represents a substantial evolution in the method.

[ascl:1102.021]
DIRT: Dust InfraRed Toolbox

DIRT is a Java applet for modelling astrophysical processes in circumstellar dust shells around young and evolved stars. With DIRT, you can select and display over 500,000 pre-run model spectral energy distributions (SEDs), find the best-fit model to your data set, and account for beam size in model fitting. DIRT also allows you to manipulate data and models with an interactive viewer, display gas and dust density and temperature profiles, and display model intensity profiles at various wavelengths.

[ascl:1102.022]
PDRT: Photo Dissociation Region Toolbox

Ultraviolet photons from O and B stars strongly influence the structure and emission spectra of the interstellar medium. The UV photons energetic enough to ionize hydrogen (hν > 13.6 eV) will create the H II region around the star, but lower energy UV photons escape. These far-UV photons (6 eV < hν < 13.6 eV) are still energetic enough to photodissociate molecules and to ionize low ionization-potential atoms such as carbon, silicon, and sulfur. They thus create a photodissociation region (PDR) just outside the H II region. In aggregate, these PDRs dominates the heating and cooling of the neutral interstellar medium.

As part of the Web Infrared Tool Shed (WITS) we have developed a web tool, called the PDR Toolbox, that allows users to determine the physical parameters of a PDR from a set of spectral line observations. Typical observations of both Galactic and extragalactic PDRs come from ground-based millimeter and submillimeter telescopes such as CARMA or the CSO, or space-based telescopes such as Spitzer, ISO, SOFIA, and Herschel. Given a set of observations of spectral line intensities, PDR Toolbox will compute best-fit FUV incident intensity and cloud density based on our published models of PDR emission.

[ascl:1102.023]
21cmFAST: A Fast, Semi-Numerical Simulation of the High-Redshift 21-cm Signal

21cmFAST is a powerful semi-numeric modeling tool designed to efficiently simulate the cosmological 21-cm signal. The code generates 3D realizations of evolved density, ionization, peculiar velocity, and spin temperature fields, which it then combines to compute the 21-cm brightness temperature. Although the physical processes are treated with approximate methods, the results were compared to a state-of-the-art large-scale hydrodynamic simulation, and the findings indicate good agreement on scales pertinent to the upcoming observations (>~ 1 Mpc). The power spectra from 21cmFAST agree with those generated from the numerical simulation to within 10s of percent, down to the Nyquist frequency. Results were shown from a 1 Gpc simulation which tracks the cosmic 21-cm signal down from z=250, highlighting the various interesting epochs. Depending on the desired resolution, 21cmFAST can compute a redshift realization on a single processor in just a few minutes. The code is fast, efficient, customizable and publicly available, making it a useful tool for 21-cm parameter studies.

[ascl:1102.024]
DiFX2: A more flexible, efficient, robust and powerful software correlator

Deller, A. T.; Brisken, W. F.; Phillips, C. J.; Morgan, J.; Alef, W.; Cappallo, R.; Middelberg, E.; Romney, J.; Rottmann, H.; Tingay, S. J.; Wayth, R.

Software correlation, where a correlation algorithm written in a high-level language such as C++ is run on commodity computer hardware, has become increasingly attractive for small to medium sized and/or bandwidth constrained radio interferometers. In particular, many long baseline arrays (which typically have fewer than 20 elements and are restricted in observing bandwidth by costly recording hardware and media) have utilized software correlators for rapid, cost-effective correlator upgrades to allow compatibility with new, wider bandwidth recording systems and improve correlator flexibility. The DiFX correlator, made publicly available in 2007, has been a popular choice in such upgrades and is now used for production correlation by a number of observatories and research groups worldwide. Here we describe the evolution in the capabilities of the DiFX correlator over the past three years, including a number of new capabilities, substantial performance improvements, and a large amount of supporting infrastructure to ease use of the code. New capabilities include the ability to correlate a large number of phase centers in a single correlation pass, the extraction of phase calibration tones, correlation of disparate but overlapping sub-bands, the production of rapidly sampled filterbank and kurtosis data at minimal cost, and many more. The latest version of the code is at least 15% faster than the original, and in certain situations many times this value. Finally, we also present detailed test results validating the correctness of the new code.

[ascl:1102.025]
LensPix: Fast MPI full sky transforms for HEALPix

Modelling of the weak lensing of the CMB will be crucial to obtain correct cosmological parameter constraints from forthcoming precision CMB anisotropy observations. The lensing affects the power spectrum as well as inducing non-Gaussianities. We discuss the simulation of full sky CMB maps in the weak lensing approximation and describe a fast numerical code. The series expansion in the deflection angle cannot be used to simulate accurate CMB maps, so a pixel remapping must be used. For parameter estimation accounting for the change in the power spectrum but assuming Gaussianity is sufficient to obtain accurate results up to Planck sensitivity using current tools. A fuller analysis may be required to obtain accurate error estimates and for more sensitive observations. We demonstrate a simple full sky simulation and subsequent parameter estimation at Planck-like sensitivity.

[ascl:1102.026]
CAMB: Code for Anisotropies in the Microwave Background

We present a fully covariant and gauge-invariant calculation of the evolution of anisotropies in the cosmic microwave background (CMB) radiation. We use the physically appealing covariant approach to cosmological perturbations, which ensures that all variables are gauge-invariant and have a clear physical interpretation. We derive the complete set of frame-independent, linearised equations describing the (Boltzmann) evolution of anisotropy and inhomogeneity in an almost Friedmann-Robertson-Walker (FRW) cold dark matter (CDM) universe. These equations include the contributions of scalar, vector and tensor modes in a unified manner. Frame-independent equations for scalar and tensor perturbations, which are valid for any value of the background curvature, are obtained straightforwardly from the complete set of equations. We discuss the scalar equations in detail, including the integral solution and relation with the line of sight approach, analytic solutions in the early radiation dominated era, and the numerical solution in the standard CDM model. Our results confirm those obtained by other groups, who have worked carefully with non-covariant methods in specific gauges, but are derived here in a completely transparent fashion.

[ascl:1102.027]
ZENO: N-body and SPH Simulation Codes

The ZENO software package integrates N-body and SPH simulation codes with a large array of programs to generate initial conditions and analyze numerical simulations. Written in C, the ZENO system is portable between Mac, Linux, and Unix platforms. It is in active use at the Institute for Astronomy (IfA), at NRAO, and possibly elsewhere.

Zeno programs can perform a wide range of simulation and analysis tasks. While many of these programs were first created for specific projects, they embody algorithms of general applicability and embrace a modular design strategy, so existing code is easily applied to new tasks. Major elements of the system include structured data file utilities facilitate basic operations on binary data, including import/export of ZENO data to other systems; snapshot generation routines to create particle distributions with various properties; systems with user-specified density profiles can be realized in collisionless or gaseous form; multiple spherical and disk components may be set up in mutual equilibrium; and snapshot manipulation routines permit the user to sift, sort, and combine particle arrays, translate and rotate particle configurations, and assign new values to data fields associated with each particle.

Simulation codes include both pure N-body and combined N-body/SPH programs. Pure N-body codes are available in both uniprocessor and parallel versions. SPH codes offer a wide range of options for gas physics, including isothermal, adiabatic, and radiating models. Snapshot analysis programs calculate temporal averages, evaluate particle statistics, measure shapes and density profiles, compute kinematic properties, and identify and track objects in particle distributions. Visualization programs generate interactive displays and produce still images and videos of particle distributions; the user may specify arbitrary color schemes and viewing transformations.

[ascl:1102.028]
ZEUS-MP/2: Computational Fluid Dynamics Code

Hayes, John C.; Norman, Michael L.; Fiedler, Robert A.; Bordner, James O.; Li, Pak Shing; Clark, Stephen E.; Ud-Doula, Asif; Mac Low, Mordecai-Mark

ZEUS-MP is a multiphysics, massively parallel, message-passing implementation of the ZEUS code. ZEUS-MP offers an MHD algorithm that is better suited for multidimensional flows than the ZEUS-2D module by virtue of modifications to the method of characteristics scheme first suggested by Hawley & Stone. This MHD module is shown to compare quite favorably to the TVD scheme described by Ryu et al. ZEUS-MP is the first publicly available ZEUS code to allow the advection of multiple chemical (or nuclear) species. Radiation hydrodynamic simulations are enabled via an implicit flux-limited radiation diffusion (FLD) module. The hydrodynamic, MHD, and FLD modules can be used, singly or in concert, in one, two, or three space dimensions. In addition, so-called 1.5D and 2.5D grids, in which the "half-D'' denotes a symmetry axis along which a constant but nonzero value of velocity or magnetic field is evolved, are supported. Self-gravity can be included either through the assumption of a GM/r potential or through a solution of Poisson's equation using one of three linear solver packages (conjugate gradient, multigrid, and FFT) provided for that purpose. Point-mass potentials are also supported.

Because ZEUS-MP is designed for large simulations on parallel computing platforms, considerable attention is paid to the parallel performance characteristics of each module in the code. Strong-scaling tests involving pure hydrodynamics (with and without self-gravity), MHD, and RHD are performed in which large problems (2563 zones) are distributed among as many as 1024 processors of an IBM SP3. Parallel efficiency is a strong function of the amount of communication required between processors in a given algorithm, but all modules are shown to scale well on up to 1024 processors for the chosen fixed problem size.

[ascl:1103.001]
Difmap: Synthesis Imaging of Visibility Data

Difmap is a program developed for synthesis imaging of visibility data from interferometer arrays of radio telescopes world-wide. Its prime advantages over traditional packages are its emphasis on interactive processing, speed, and the use of Difference mapping techniques.

[ascl:1103.002]
PGPLOT: Device-independent Graphics Package for Simple Scientific Graphs

The PGPLOT Graphics Subroutine Library is a Fortran- or C-callable, device-independent graphics package for making simple scientific graphs. It is intended for making graphical images of publication quality with minimum effort on the part of the user. For most applications, the program can be device-independent, and the output can be directed to the appropriate device at run time.

The PGPLOT library consists of two major parts: a device-independent part and a set of device-dependent "device handler" subroutines for output on various terminals, image displays, dot-matrix printers, laser printers, and pen plotters. Common file formats supported include PostScript and GIF.

PGPLOT itself is written mostly in standard Fortran-77, with a few non-standard, system-dependent subroutines. PGPLOT subroutines can be called directly from a Fortran-77 or Fortran-90 program. A C binding library (cpgplot) and header file (cpgplot.h) are provided that allow PGPLOT to be called from a C or C++ program; the binding library handles conversion between C and Fortran argument-passing conventions.

[ascl:1103.003]
S2PLOT: Three-dimensional (3D) Plotting Library

We present a new, three-dimensional (3D) plotting library with advanced features, and support for standard and enhanced display devices. The library - S2PLOT - is written in C and can be used by C, C++ and FORTRAN programs on GNU/Linux and Apple/OSX systems. S2PLOT draws objects in a 3D (x,y,z) Cartesian space and the user interactively controls how this space is rendered at run time. With a PGPLOT inspired interface, S2PLOT provides astronomers with elegant techniques for displaying and exploring 3D data sets directly from their program code, and the potential to use stereoscopic and dome display devices. The S2PLOT architecture supports dynamic geometry and can be used to plot time-evolving data sets, such as might be produced by simulation codes. In this paper, we introduce S2PLOT to the astronomical community, describe its potential applications, and present some example uses of the library.

[ascl:1103.004]
SPLASH: Interactive Visualization Tool for Smoothed Particle Hydrodynamics Simulations

SPLASH (formerly SUPERSPHPLOT) visualizes output from (astrophysical) simulations using the Smoothed Particle Hydrodynamics (SPH) method in one, two and three dimensions. Written in Fortran 90, it uses the PGPLOT graphics subroutine library for plotting. It is based around a command-line menu structure but utilizes the interactive capabilities of PGPLOT to manipulate data interactively in the plotting window. SPLASH is fully interactive; visualizations can be changed rapidly at the touch of a button (e.g. zooming, rotating, shifting cross section positions etc). Data is read directly from the code dump format giving rapid access to results and the visualization is advanced forwards and backwards through timesteps by single keystrokes. SPLASH uses the SPH kernel to render plots of not only density but other physical quantities, giving a smooth representation of the data.

[ascl:1103.005]
Splotch: Ray Tracer to Visualize SPH Simulations

Splotch is a light and fast, publicly available, ray-tracer software tool which supports the effective visualization of cosmological simulations data. The algorithm it relies on is designed to deal with point-like data, optimizing the ray-tracing calculation by ordering the particles as a function of their 'depth', defined as a function of one of the coordinates or other associated parameters. Realistic three-dimensional impressions are reached through a composition of the final colour in each pixel properly calculating emission and absorption of individual volume elements.

[ascl:1103.006]
GLESP 2.0: Gauss-Legendre Sky Pixelization for CMB Analysis

Doroshkevich, A. G.; Naselsky, P. D.; Verkhodanov, O. V.; Novikov, D. I.; Turchaninov, V. I.; Novikov, I. D.; Christensen, P. R.; Chiang, L.-Y.

GLESP is a pixelization scheme for the cosmic microwave background (CMB) radiation maps. This scheme is based on the Gauss-Legendre polynomials zeros and allows one to create strict orthogonal expansion of the map.

[ascl:1103.007]
VisIt: Interactive Parallel Visualization and Graphical Analysis Tool

VisIt is a free interactive parallel visualization and graphical analysis tool for viewing scientific data on Unix and PC platforms. Users can quickly generate visualizations from their data, animate them through time, manipulate them, and save the resulting images for presentations. VisIt contains a rich set of visualization features so that you can view your data in a variety of ways. It can be used to visualize scalar and vector fields defined on two- and three-dimensional (2D and 3D) structured and unstructured meshes. VisIt was designed to handle very large data set sizes in the terascale range and yet can also handle small data sets in the kilobyte range. See the table below for more details about the tool’s features.

VisIt was developed by the Department of Energy (DOE) Advanced Simulation and Computing Initiative (ASCI) to visualize and analyze the results of terascale simulations. It was developed as a framework for adding custom capabilities and rapidly deploying new visualization technologies. Although the primary driving force behind the development of VisIt was for visualizing terascale data, it is also well suited for visualizing data from typical simulations on desktop systems.

[ascl:1103.008]
Parallel HOP: A Scalable Halo Finder for Massive Cosmological Data Sets

Modern N-body cosmological simulations contain billions ($10^9$) of dark matter particles. These simulations require hundreds to thousands of gigabytes of memory, and employ hundreds to tens of thousands of processing cores on many compute nodes. In order to study the distribution of dark matter in a cosmological simulation, the dark matter halos must be identified using a halo finder, which establishes the halo membership of every particle in the simulation. The resources required for halo finding are similar to the requirements for the simulation itself. In particular, simulations have become too extensive to use commonly-employed halo finders, such that the computational requirements to identify halos must now be spread across multiple nodes and cores. Here we present a scalable-parallel halo finding method called Parallel HOP for large-scale cosmological simulation data. Based on the halo finder HOP, it utilizes MPI and domain decomposition to distribute the halo finding workload across multiple compute nodes, enabling analysis of much larger datasets than is possible with the strictly serial or previous parallel implementations of HOP. We provide a reference implementation of this method as a part of the toolkit yt, an analysis toolkit for Adaptive Mesh Refinement (AMR) data that includes complementary analysis modules. Additionally, we discuss a suite of benchmarks that demonstrate that this method scales well up to several hundred tasks and datasets in excess of $2000^3$ particles. The Parallel HOP method and our implementation can be readily applied to any kind of N-body simulation data and is therefore widely applicable. Parallel HOP is part of yt.

[ascl:1103.009]
SPHRAY: A Smoothed Particle Hydrodynamics Ray Tracer for Radiative Transfer

SPHRAY, a Smoothed Particle Hydrodynamics (SPH) ray tracer, is designed to solve the 3D, time dependent, radiative transfer (RT) equations for arbitrary density fields. The SPH nature of SPHRAY makes the incorporation of separate hydrodynamics and gravity solvers very natural. SPHRAY relies on a Monte Carlo (MC) ray tracing scheme that does not interpolate the SPH particles onto a grid but instead integrates directly through the SPH kernels. Given initial conditions and a description of the sources of ionizing radiation, the code will calculate the non-equilibrium ionization state (HI, HII, HeI, HeII, HeIII, e) and temperature (internal energy/entropy) of each SPH particle. The sources of radiation can include point like objects, diffuse recombination radiation, and a background field from outside the computational volume. The MC ray tracing implementation allows for the quick introduction of new physics and is parallelization friendly. A quick Axis Aligned Bounding Box (AABB) test taken from computer graphics applications allows for the acceleration of the raytracing component. We present the algorithms used in SPHRAY and verify the code by performing all the test problems detailed in the recent Radiative Transfer Comparison Project of Iliev et. al. The Fortran 90 source code for SPHRAY and example SPH density fields are made available online.

[ascl:1103.010]
Hydra: A Parallel Adaptive Grid Code

We describe the first parallel implementation of an adaptive particle-particle, particle-mesh code with smoothed particle hydrodynamics. Parallelisation of the serial code, "Hydra," is achieved by using CRAFT, a Cray proprietary language which allows rapid implementation of a serial code on a parallel machine by allowing global addressing of distributed memory.

The collisionless variant of the code has already completed several 16.8 million particle cosmological simulations on a 128 processor Cray T3D whilst the full hydrodynamic code has completed several 4.2 million particle combined gas and dark matter runs. The efficiency of the code now allows parameter-space explorations to be performed routinely using $64^3$ particles of each species. A complete run including gas cooling, from high redshift to the present epoch requires approximately 10 hours on 64 processors.

[ascl:1103.011]
AP3M: Adaptive Particle-particle, Particle-mesh Code

AP^{3}M is an adaptive particle-particle, particle-mesh code. It is older than Hydra (ascl:1103.010) but faster and more memory-efficient for dark-matter only calculations. The Adaptive P^{3}M technique (AP^{3}M) is built around the standard P^{3}M algorithm. AP^{3}M produces fully equivalent forces to P^{3}M but represents a more efficient implementation of the force splitting idea of P^{3}M. The AP^{3}M program may be used in any of the three modes with an appropriate choice of input parameter.

[ascl:1103.012]
Pyflation: Second Order Perturbations During Inflation Beyond Slow-roll

Pyflation calculates cosmological perturbations during an inflationary expansion of the universe. The modules in the pyflation Python package can be used to run simulations of different scalar field models of the early universe. The main classes are contained in the cosmomodels module and include simulations of background fields and first order and second order perturbations. The sourceterm package contains modules required for the computation of the term required for the evolution of second order perturbations.

Alongside the Python package, the bin directory contains Python scripts which can run first and second order simulations. A helper script called pyflation-qsubstart.py sets up a full second order run (including background, first order and source calculations) to be used on queueing system which contains the qsub executable (e.g. a Rocks cluster).

[ascl:1103.014]
ParaView: Data Analysis and Visualization Application

ParaView is an open-source, multi-platform data analysis and visualization application. ParaView users can quickly build visualizations to analyze their data using qualitative and quantitative techniques. The data exploration can be done interactively in 3D or programmatically using ParaView's batch processing capabilities.

ParaView was developed to analyze extremely large datasets using distributed memory computing resources. It can be run on supercomputers to analyze datasets of terascale as well as on laptops for smaller data.

[ascl:1103.015]
Cloudy_3D: Quick Pseudo-3D Photoionization Code

We developed a new quick pseudo-3D photoionization code based on Cloudy (G. Ferland) and IDL (RSI) tools. The code is running the 1D photoionization code Cloudy various times, changing at each run the input parameters (e.g. inner radius, density law) according to an angular law describing the morphology of the object. Then a cube is generated by interpolating the outputs of Cloudy. In each cell of the cube, the physical conditions (electron temperature and density, ionic fractions) and the emissivities of lines are determined. Associated tools (VISNEB and VELNEB_3D) are used to rotate the nebula and to compute surface brightness maps and emission line profiles, given a velocity law and taking into account the effect of the thermal broadening and eventually the turbulence. Integrated emission line profiles are computed, given aperture shapes and positions (seeing and instrumental width effects are included). The main advantage of this tool is the short time needed to compute a model (a few tens minutes).

[ascl:1104.001]
TomograPy: A Fast, Instrument-Independent, Solar Tomography Software

TomograPy is an open-source software freely available on the Python Package Index that can perform fast tomographic inversions that scale linearly with the number of measurements, linearly with the length of the reconstruction cube (and not the number of voxels) and linearly with the number of cores and can use data from different sources and with a variety of physical models. For performance, TomograPy uses a parallelized-projection algorithm. It relies on the World Coordinate System standard to manage various data sources. A variety of inversion algorithms are provided to perform the tomographic-map estimation. A test suite is provided along with the code to ensure software quality. Since it makes use of the Siddon algorithm it is restricted to rectangular parallelepiped voxels but the spherical geometry of the corona can be handled through proper use of priors.

[ascl:1104.002]
AstroBEAR: Adaptive Mesh Refinement Code for Ideal Hydrodynamics & Magnetohydrodynamics

AstroBEAR is a modular hydrodynamic & magnetohydrodynamic code environment designed for a variety of astrophysical applications. It uses the BEARCLAW package, a multidimensional, Eulerian computational code used to solve hyperbolic systems of equations. AstroBEAR allows adaptive-mesh-refinment (AMR) simulations in 2, 2.5 (i.e., cylindrical), and 3 dimensions, in either cartesian or curvilinear coordinates. Parallel applications are supported through the MPI architecture. AstroBEAR is written in Fortran 90/95 using standard libraries.

AstroBEAR supports hydrodynamic (HD) and magnetohydrodynamic (MHD) applications using a variety of spatial and temporal methods. MHD simulations are kept divergence-free via the constrained transport (CT) methods of Balsara & Spicer. Three different equation of state environments are available: ideal gas, gas with differing isentropic γ, and the analytic Thomas-Fermi formulation of A.R. Bell.

[ascl:1104.003]
Starburst99: Synthesis Models for Galaxies with Active Star Formation

Leitherer, Claus; Schaerer, Daniel; Goldader, Jeff; Gonzalez-Delgado, Rosa; Robert, Carmelle; Foo Kune, Denis; de Mello, Duilia; Devost, Daniel; Heckman, Timothy M.; Aloisi, Alessandra; Martins, Lucimara; Vazquez, Gerardo

Starburst99 is a comprehensive set of model predictions for spectrophotometric and related properties of galaxies with active star formation. The models are presented in a homogeneous way for five metallicities between Z = 0.040 and 0.001 and three choices of the initial mass function. The age coverage is 10^6 to 10^9 yr. Spectral energy distributions are used to compute colors and other quantities.

[ascl:1104.004]
MASSCLEAN: MASSive CLuster Evolution and ANalysis Package

MASSCLEAN is a sophisticated and robust stellar cluster image and photometry simulation package. This package is able to create color-magnitude diagrams and standard FITS images in any of the traditional optical and near-infrared bands based on cluster characteristics input by the user, including but not limited to distance, age, mass, radius and extinction. At the limit of very distant, unresolved clusters, we have checked the integrated colors created in MASSCLEAN against those from other simple stellar population (SSP) models with consistent results. Because the algorithm populates the cluster with a discrete number of tenable stars, it can be used as part of a Monte Carlo Method to derive the probabilistic range of characteristics (integrated colors, for example) consistent with a given cluster mass and age.

[ascl:1104.005]
GALAXEV: Evolutionary Stellar Population Synthesis Models

GALAXEV is a library of evolutionary stellar population synthesis models computed using the new isochrone synthesis code of Bruzual & Charlot (2003). This code allows one to computes the spectral evolution of stellar populations in wide ranges of ages and metallicities at a resolution of 3 Å across the whole wavelength range from 3200 Å to 9500 Å, and at lower resolution outside this range.

[ascl:1104.006]
LECTOR: Line-strengths in One-dimensional ASCII Spectra

LECTOR is a Fortran 77 code that measures line-strengths in one dimensional ascii spectra. The code returns the values of the Lick indices as well as those of Vazdekis & Arimoto 1999, Vazdekis et al. 2001, Rose 1994, Jones & Worthey 1995 and Cenarro et al. 2001. The code measures as many indices as you wish if the limits of two pseudocontinua (at each side of the feature) and the feature itself (i.e. Lick-style index definition) are provided. The Lick-style indices could be either expressed in pseudo-equivalent widths or in magnitudes. If requested the program provides index error estimates on the basis of photon statistics.

[ascl:1104.007]
ULySS: A Full Spectrum Fitting Package

ULySS (University of Lyon Spectroscopic Analysis Software) is an open-source software package written in the GDL/IDL language to analyze astronomical data. ULySS fits a spectrum with a linear combination of non-linear components convolved with a line-of-sight velocity distribution (LOSVD) and multiplied by a polynomial continuum. ULySS is used to study stellar populations of galaxies and star clusters and atmospheric parameters of stars.

[ascl:1104.008]
Rmodel: Determining Stellar Population Parameters

This program determines stellar population parameters (e.g. age, metallicity, IMF slope,...), using as input a pair of line-strength indices, through the interpolation in SSP model predictions. Both linear and bivariate fits are computed to perform the interpolation.

[ascl:1104.009]
r-Java: An r-process Code and Graphical User Interface for Heavy-Element Nucleosynthesis

r-Java performs r-process nucleosynthesis calculations. It has a simple graphical user interface and is carries out nuclear statistical equilibrium (NSE) as well as static and dynamic r-process calculations for a wide range of input parameters. r-Java generates an abundance pattern based on a general entropy expression that can be applied to degenerate as well as non-degenerate matter, which allows tracking of the rapid density and temperature evolution of the ejecta during the initial stages of ejecta expansion.

[ascl:1104.010]
GALFIT: Detailed Structural Decomposition of Galaxy Images

GALFIT is a two-dimensional (2-D) fitting algorithm designed to extract structural components from galaxy images, with emphasis on closely modeling light profiles of spatially well-resolved, nearby galaxies observed with the Hubble Space Telescope. The algorithm improves on previous techniques in two areas: 1.) by being able to simultaneously fit a galaxy with an arbitrary number of components, and 2.) with optimization in computation speed, suited for working on large galaxy images. 2-D models such as the "Nuker'' law, the Sersic (de Vaucouleurs) profile, an exponential disk, and Gaussian or Moffat functions are used. The azimuthal shapes are generalized ellipses that can fit disky and boxy components. Many galaxies with complex isophotes, ellipticity changes, and position-angle twists can be modeled accurately in 2-D. When examined in detail, even simple-looking galaxies generally require at least three components to be modeled accurately rather than the one or two components more often employed. This is illustrated by way of seven case studies, which include regular and barred spiral galaxies, highly disky lenticular galaxies, and elliptical galaxies displaying various levels of complexities. A useful extension of this algorithm is to accurately extract nuclear point sources in galaxies.

[ascl:1104.011]
DAOPHOT: Crowded-field Stellar Photometry Package

The DAOPHOT program exploits the capability of photometrically linear image detectors to perform stellar photometry in crowded fields. Raw CCD images are prepared prior to analysis, and following the obtaining of an initial star list with the FIND program, synthetic aperture photometry is performed on the detected objects with the PHOT routine. A local sky brightness and a magnitude are computed for each star in each of the specified stellar apertures, and for crowded fields, the empirical point-spread function must then be obtained for each data frame. The GROUP routine divides the star list for a given frame into optimum subgroups, and then the NSTAR routine is used to obtain photometry for all the stars in the frame by means of least-squares profile fits.

[ascl:1104.012]
CHIWEI: A Code of Goodness of Fit Tests for Weighted and Unweighed Histograms

A self-contained Fortran-77 program for goodness of fit tests for histograms with weighted entries as well as with unweighted entries is presented. The code calculates test statistic for case of histogram with normalized weights of events and for case of unnormalized weights of events.

[ascl:1104.013]
BEARCLAW: Boundary Embedded Adaptive Refinement Conservation LAW package

The BEARCLAW package is a multidimensional, Eulerian AMR-capable computational code written in Fortran to solve hyperbolic systems for astrophysical applications. It is part of AstroBEAR, a hydrodynamic & magnetohydrodynamic code environment designed for a variety of astrophysical applications which allows simulations in 2, 2.5 (i.e., cylindrical), and 3 dimensions, in either cartesian or curvilinear coordinates.

[ascl:1104.014]
A Correction to the Standard Galactic Reddening Map: Passive Galaxies as Standard Crayons

We present corrections to the Schlegel, Finkbeiner, Davis (SFD98) reddening maps over the Sloan Digital Sky Survey northern Galactic cap area. To find these corrections, we employ what we dub the "standard crayon" method, in which we use passively evolving galaxies as color standards by which to measure deviations from the reddening map. We select these passively evolving galaxies spectroscopically, using limits on the H alpha and O II equivalent widths to remove all star-forming galaxies from the SDSS main galaxy catalog. We find that by correcting for known reddening, redshift, color-magnitude relation, and variation of color with environmental density, we can reduce the scatter in color to below 3% in the bulk of the 151,637 galaxies we select. Using these galaxies we construct maps of the deviation from the SFD98 reddening map at 4.5 degree resolution, with 1-sigma error of ~ 1.5 millimagnitudes E(B-V). We find that the SFD98 maps are largely accurate with most of the map having deviations below 3 millimagnitudes E(B-V), though some regions do deviate from SFD98 by as much as 50%. The maximum deviation found is 45 millimagnitudes in E(B-V), and spatial structure of the deviation is strongly correlated with the observed dust temperature, such that SFD98 underpredicts reddening in regions of low dust temperature. The maps of these deviations, as well as their errors, are made available to the scientific community as supplemental correction to SFD98 at the URL below.

[ascl:1105.001]
STILTS: Starlink Tables Infrastructure Library Tool Set

The STIL Tool Set is a set of command-line tools based on STIL, the Starlink Tables Infrastructure Library. It deals with the processing of tabular data; the package has been designed for, but is not restricted to, astronomical tables such as object catalogues. Some of the tools are generic and can work with multiple formats (including FITS, VOTable, CSV, SQL and ASCII), and others are specific to the VOTable format. In some ways, STILTS forms the command-line counterpart of the GUI table analysis tool TOPCAT. The package is robust, fully documented, and designed for efficiency, especially with very large datasets.

Facilities offered include:

- format conversion
- crossmatching
- plotting
- column calculation and rearrangement
- row selections
- data and metadata manipulation and display
- sorting
- statistical calculations
- histogram calculation
- data validation
- VO service access

[ascl:1105.002]
PACCE: Perl Algorithm to Compute Continuum and Equivalent Widths

PACCE (Perl Algorithm to Compute continuum and Equivalent Widths) computes continuum and equivalent widths. PACCE is able to determine mean continuum and continuum at line center values, which are helpful in stellar population studies, and is also able to compute the uncertainties in the equivalent widths using photon statistics.

[ascl:1105.003]
The DTFE public software: The Delaunay Tessellation Field Estimator code

We present the DTFE public software, a code for reconstructing fields from a discrete set of samples/measurements using the maximum of information contained in the point distribution. The code is written in C++ using the CGAL library and is parallelized using OpenMP. The software was designed for the analysis of cosmological data but can be used in other fields where one must interpolate quantities given at a discrete point set. The software comes with a wide suite of options to facilitate the analysis of 2- and 3-dimensional data and of both numerical simulations and galaxy redshift surveys. For comparison purposes, the code also implements the TSC and SPH grid interpolation methods. The code comes with an extensive user guide detailing the program options, examples and the inner workings of the code.

[ascl:1105.004]
SLiM: A Code for the Simulation of Wave Propagation through an Inhomogeneous, Magnetised Solar Atmosphere

The semi-spectral linear MHD (SLiM) code follows the interaction of linear waves through an inhomogeneous three-dimensional solar atmosphere. The background model allows almost arbitrary perturbations of density, temperature, sound speed as well as magnetic and velocity fields. The code is useful in understanding the helioseismic signatures of various solar features, including sunspots.

[ascl:1105.005]
ChaNGa: Charm N-body GrAvity solver

ChaNGa (Charm N-body GrAvity solver) performs collisionless N-body simulations. It can perform cosmological simulations with periodic boundary conditions in comoving coordinates or simulations of isolated stellar systems. It also can include hydrodynamics using the Smooth Particle Hydrodynamics (SPH) technique. It uses a Barnes-Hut tree to calculate gravity, with hexadecapole expansion of nodes and Ewald summation for periodic forces. Timestepping is done with a leapfrog integrator with individual timesteps for each particle.

[ascl:1105.006]
SPARC: Seismic Propagation through Active Regions and Convection

The Seismic Propagation through Active Regions and Convection (SPARC) code was developed by S. Hanasoge. The acoustic wavefield in SPARC is simulated by numerically solving the linearised 3-D Euler equations in Cartesian geometry (e.g., see Hanasoge, Duvall and Couvidat (2007)). Spatial derivatives are calculated using sixth-order compact finite differences (Lele,1992) and time evolution is achieved through the repeated application of an optimized second-order five-stage Runge-Kutta scheme (Hu, 1996). Periodic horizontal boundaries are used.

[ascl:1105.007]
Sunspot Models

This IDL code creates a thick magneto-static structure with parameters of a typical sunspot in a solar like photosphere - chromosphere. The variable parameters are field strength on the axis, radius, and Wilson depression (displacement of the atmosphere on the axis with respect to the field-free atmosphere). Output are magnetic field vector, pressure and density distributions with radius and height. The structure has azimuthal symmetry. The codes are relatively self explanatory and the download packages contain README files.

[ascl:1105.008]
Flux Tube Model

This Fortran code computes magnetohydrostatic flux tubes and sheets according to the method of Steiner, Pneuman, & Stenflo (1986) A&A 170, 126-137. The code has many parameters contained in one input file that are easily modified. Extensive documentation is provided in README files.

[ascl:1105.009]
Ray Tracing Codes: run_tau, run_raypath, and ray_kernel

Time-distance helioseismology aims to measure and interpret the travel times of waves propagating between two points located on the solar surface. The travel times are then inverted to infer sub-surface properties that are encoded in the measurements. The trajectory of the waves generally follows that of the infinite-frequency ray path, although they are sensitive to perturbations off of this path. Finite-frequency sensitivity kernels are thus needed to give more accurate inversion results.

Ray tracing codes calculate travel time kernels for a ray. There are three main codes which calculate the group time as a function of distance, the ray paths as well as the phase and group times along the path, and the ray kernels for the sound speed squared.

[ascl:1105.010]
CASTRO: Multi-dimensional Eulerian AMR Radiation-hydrodynamics Code

Almgren, A. S.; Beckner, V. E.; Bell, J. B.; Day, M. S.; Howell, L. H.; Katz, M; Lijewski, M. J.; Malone, C.; Nonaka, A.; Singer, M.; Zhang, W; Zingale, M.

CASTRO is a multi-dimensional Eulerian AMR radiation-hydrodynamics code that includes stellar equations of state, nuclear reaction networks, and self-gravity. Initial target applications for CASTRO include Type Ia and Type II supernovae. CASTRO supports calculations in 1-d, 2-d and 3-d Cartesian coordinates, as well as 1-d spherical and 2-d cylindrical (r-z) coordinate systems. Time integration of the hydrodynamics equations is based on an unsplit version of the the piecewise parabolic method (PPM) with new limiters that avoid reducing the accuracy of the scheme at smooth extrema. CASTRO can follow an arbitrary number of isotopes or elements. The atomic weights and amounts of these elements are used to calculate the mean molecular weight of the gas required by the equation of state. CASTRO supports several different approaches to solving for self-gravity. The most general is a full Poisson solve for the gravitational potential. CASTRO also supports a monopole approximation for gravity, and a constant gravity option is also available. The CASTRO software is written in C++ and Fortran, and is based on the BoxLib software framework developed by CCSE.

[ascl:1105.011]
Ganalyzer: A tool for automatic galaxy image analysis

Ganalyzer is a model-based tool that automatically analyzes and classifies galaxy images. Ganalyzer works by separating the galaxy pixels from the background pixels, finding the center and radius of the galaxy, generating the radial intensity plot, and then computing the slopes of the peaks detected in the radial intensity plot to measure the spirality of the galaxy and determine its morphological class. Unlike algorithms that are based on machine learning, Ganalyzer is based on measuring the spirality of the galaxy, a task that is difficult to perform manually, and in many cases can provide a more accurate analysis compared to manual observation. Ganalyzer is simple to use, and can be easily embedded into other image analysis applications. Another advantage is its speed, which allows it to analyze ~10,000,000 galaxy images in five days using a standard modern desktop computer. These capabilities can make Ganalyzer a useful tool in analyzing large datasets of galaxy images collected by autonomous sky surveys such as SDSS, LSST or DES.

[ascl:1105.012]
Stagger: MHD Method for Modeling Star Formation

Stagger is an astrophysical MHD code actively used to model star formation. It is equipped with a multi-frequency radiative transfer module and a comprehensive equation of state module that includes a large number of atomic and molecular species, to be able to compute realistic 3-D models of the near-surface layers of stars. The current version of the code allows a discretization that explicitly conserves mass, momentum, energy, and magnetic flux. The tensor formulation of the viscosity ensures that the viscous force is insensitive to the coordinate system orientation, thereby avoiding artificial grid-alignment.

[ascl:1105.013]
CAMB Sources: Number Counts, Lensing & Dark-age 21cm Power Spectra

We relate the observable number of sources per solid angle and redshift to the underlying proper source density and velocity, background evolution and line-of-sight potentials. We give an exact result in the case of linearized perturbations assuming general relativity. This consistently includes contributions of the source density perturbations and redshift distortions, magnification, radial displacement, and various additional linear terms that are small on sub-horizon scales. In addition we calculate the effect on observed luminosities, and hence the result for sources observed as a function of flux, including magnification bias and radial-displacement effects. We give the corresponding linear result for a magnitude-limited survey at low redshift, and discuss the angular power spectrum of the total count distribution. We also calculate the cross-correlation with the CMB polarization and temperature including Doppler source terms, magnification, redshift distortions and other velocity effects for the sources, and discuss why the contribution of redshift distortions is generally small. Finally we relate the result for source number counts to that for the brightness of line radiation, for example 21-cm radiation, from the sources.

[ascl:1105.014]
PSRCHIVE: Development Library for the Analysis of Pulsar Astronomical Data

PSRCHIVE is an Open Source C++ development library for the analysis of pulsar astronomical data. It implements an extensive range of algorithms for use in pulsar timing, polarimetric calibration, single-pulse analyses, RFI mitigation, scintillation studies, etc. These tools are utilized by a powerful suite of user-end programs that come with the library.

[ascl:1106.001]
AlterBBN: A program for calculating the BBN abundances of the elements in alternative cosmologies

AlterBBN evaluates the abundances of the elements generated by Big-Bang nucleosynthesis (BBN). This program computes the abundances of the elements in the standard model of cosmology and allows the user to alter the assumptions of the cosmological model to study their consequences on the abundances of the elements. In particular the baryon-to-photon ratio and the effective number of neutrinos, as well as the expansion rate and the entropy content of the Universe during BBN can be modified in AlterBBN. Such features allow the user to test the cosmological models by confronting them to BBN constraints.

[ascl:1106.002]
PHOEBE: PHysics Of Eclipsing BinariEs

PHOEBE (PHysics Of Eclipsing BinariEs) is a modeling package for eclipsing binary stars, built on top of the widely used WD program (Wilson & Devinney 1971). This introductory paper overviews most important scientific extensions (incorporating observational spectra of eclipsing binaries into the solution-seeking process, extracting individual temperatures from observed color indices, main-sequence constraining and proper treatment of the reddening), numerical innovations (suggested improvements to WD's Differential Corrections method, the new Nelder & Mead's downhill Simplex method) and technical aspects (back-end scripter structure, graphical user interface). While PHOEBE retains 100% WD compatibility, its add-ons are a powerful way to enhance WD by encompassing even more physics and solution reliability.

[ascl:1106.003]
PLplot: Cross-platform Software Package for Scientific Plots

PLplot is a cross-platform software package for creating scientific plots. To help accomplish that task it is organized as a core C library, language bindings for that library, and device drivers which control how the plots are presented in non-interactive and interactive plotting contexts. The PLplot core library can be used to create standard x-y plots, semi-log plots, log-log plots, contour plots, 3D surface plots, mesh plots, bar charts and pie charts. Multiple graphs (of the same or different sizes) may be placed on a single page, and multiple pages are allowed for those device formats that support them. PLplot has core support for Unicode. This means for our many Unicode-aware devices that plots can be labelled using the enormous selection of Unicode mathematical symbols. A large subset of our Unicode-aware devices also support complex text layout (CTL) languages such as Arabic, Hebrew, and Indic and Indic-derived CTL scripts such as Devanagari, Thai, Lao, and Tibetan. PLplot device drivers support a number of different file formats for non-interactive plotting and a number of different platforms that are suitable for interactive plotting. It is easy to add new device drivers to PLplot by writing a small number of device dependent routines.

[ascl:1106.004]
E3D: The Euro3D Visualization Tool

E3D is a package of tools for the analysis and visualization of IFS data. It is capable of reading, writing, and visualizing reduced data from 3D spectrographs of any kind.

[ascl:1106.005]
R3D: Reduction Package for Integral Field Spectroscopy

R3D was developed to reduce fiber-based integral field spectroscopy (IFS) data. The package comprises a set of command-line routines adapted for each of these steps, suitable for creating pipelines. The routines have been tested against simulations, and against real data from various integral field spectrographs (PMAS, PPAK, GMOS, VIMOS and INTEGRAL). Particular attention is paid to the treatment of cross-talk.

R3D unifies the reduction techniques for the different IFS instruments to a single one, in order to allow the general public to reduce different instruments data in an homogeneus, consistent and simple way. Although still in its prototyping phase, it has been proved to be useful to reduce PMAS (both in the Larr and the PPAK modes), VIMOS and INTEGRAL data. The current version has been coded in Perl, using PDL, in order to speed-up the algorithm testing phase. Most of the time critical algorithms have been translated to C, and it is our intention to translate all of them. However, even in this phase R3D is fast enough to produce valuable science frames in reasonable time.

[ascl:1106.006]
MECI: A Method for Eclipsing Component Identification

We describe an automated method for assigning the most probable physical parameters to the components of an eclipsing binary, using only its photometric light curve and combined colors. With traditional methods, one attempts to optimize a multi-parameter model over many iterations, so as to minimize the chi-squared value. We suggest an alternative method, where one selects pairs of coeval stars from a set of theoretical stellar models, and compares their simulated light curves and combined colors with the observations. This approach greatly reduces the parameter space over which one needs to search, and allows one to estimate the components' masses, radii and absolute magnitudes, without spectroscopic data. We have implemented this method in an automated program using published theoretical isochrones and limb-darkening coefficients. Since it is easy to automate, this method lends itself to systematic analyses of datasets consisting of photometric time series of large numbers of stars, such as those produced by OGLE, MACHO, TrES, HAT, and many others surveys.

[ascl:1106.007]
MIRIAD: Multi-channel Image Reconstruction, Image Analysis, and Display

MIRIAD is a radio interferometry data-reduction package, designed for taking raw visibility data through calibration to the image analysis stage. It has been designed to handle any interferometric array, with working examples for BIMA, CARMA, SMA, WSRT, and ATCA. A separate version for ATCA is available, which differs in a few minor ways from the CARMA version.

[ascl:1106.008]
GRAFIC-2: Multiscale Gaussian Random Fields for Cosmological Simulations

This paper describes the generation of initial conditions for numerical simulations in cosmology with multiple levels of resolution, or multiscale simulations. We present the theory of adaptive mesh refinement of Gaussian random fields followed by the implementation and testing of a computer code package performing this refinement called GRAFIC-2.

[ascl:1106.009]
PARAMESH V4.1: Parallel Adaptive Mesh Refinement

PARAMESH is a package of Fortran 90 subroutines designed to provide an application developer with an easy route to extend an existing serial code which uses a logically cartesian structured mesh into a parallel code with adaptive mesh refinement (AMR). Alternatively, in its simplest use, and with minimal effort, it can operate as a domain decomposition tool for users who want to parallelize their serial codes, but who do not wish to use adaptivity.

The package builds a hierarchy of sub-grids to cover the computational domain, with spatial resolution varying to satisfy the demands of the application. These sub-grid blocks form the nodes of a tree data-structure (quad-tree in 2D or oct-tree in 3D). Each grid block has a logically cartesian mesh. The package supports 1, 2 and 3D models. PARAMESH is released under the NASA-wide Open-Source software license.

[ascl:1106.010]
MAGPHYS: Multi-wavelength Analysis of Galaxy Physical Properties

MAGPHYS is a self-contained, user-friendly model package to interpret observed spectral energy distributions of galaxies in terms of galaxy-wide physical parameters pertaining to the stars and the interstellar medium. MAGPHYS is optimized to derive statistical constraints of fundamental parameters related to star formation activity and dust content (e.g. star formation rate, stellar mass, dust attenuation, dust temperatures) of large samples of galaxies using a wide range of multi-wavelength observations. A Bayesian approach is used to interpret the SEDs all the way from the ultraviolet/optical to the far-infrared.

[ascl:1106.011]
DRAGON: Galactic Cosmic Ray Diffusion Code

DRAGON adopts a second-order Cranck-Nicholson scheme with Operator Splitting and time overrelaxation to solve the diffusion equation. This provides a fast solution that is accurate enough for the average user. Occasionally, users may want to have very accurate solutions to their problem. To enable this feature, users may get close to the accurate solution by using the fast method, and then switch to a more accurate solution scheme featuring the Alternating-Direction-Implicit (ADI) Cranck-Nicholson scheme.

[ascl:1106.012]
SLUG: Stochastically Lighting Up Galaxies

The effects of stochasticity on the luminosities of stellar populations are an often neglected but crucial element for understanding populations in the low mass or low star formation rate regime. To address this issue, we present SLUG, a new code to "Stochastically Light Up Galaxies". SLUG synthesizes stellar populations using a Monte Carlo technique that treats stochastic sampling properly including the effects of clustering, the stellar initial mass function, star formation history, stellar evolution, and cluster disruption. This code produces many useful outputs, including i) catalogs of star clusters and their properties, such as their stellar initial mass distributions and their photometric properties in a variety of filters, ii) two dimensional histograms of color-magnitude diagrams of every star in the simulation, iii) and the photometric properties of field stars and the integrated photometry of the entire simulated galaxy. After presenting the SLUG algorithm in detail, we validate the code through comparisons with starburst99 in the well-sampled regime, and with observed photometry of Milky Way clusters. Finally, we demonstrate the SLUG's capabilities by presenting outputs in the stochastic regime.

[ascl:1106.013]
MGCAMB: Modification of Growth with CAMB

CAMB is a public Fortran 90 code written by Antony Lewis and Anthony Challinor for evaluating cosmological observables. MGCAMB is a modified version of CAMB in which the linearized Einstein equations of General Relativity (GR) are modified. MGCAMB can also be used in CosmoMC to fit different modified-gravity (MG) models to data.

[ascl:1106.014]
Transit Analysis Package (TAP and autoKep): IDL Graphical User Interfaces for Extrasolar Planet Transit Photometry

We present an IDL graphical user interface-driven software package designed for the analysis of extrasolar planet transit light curves. The Transit Analysis Package (TAP) software uses Markov Chain Monte Carlo (MCMC) techniques to fit light curves using the analytic model of Mandel and Agol (2002). The package incorporates a wavelet based likelihood function developed by Carter and Winn (2009) which allows the MCMC to assess parameter uncertainties more robustly than classic chi-squared methods by parameterizing uncorrelated "white" and correlated "red" noise. The software is able to simultaneously analyze multiple transits observed in different conditions (instrument, filter, weather, etc). The graphical interface allows for the simple execution and interpretation of Bayesian MCMC analysis tailored to a user's specific data set and has been thoroughly tested on ground-based and Kepler photometry. AutoKep provides a similar GUI for the preparation of Kepler MAST archive data for analysis by TAP or any other analysis software. This paper describes the software release and provides instructions for its use.

[ascl:1106.015]
OrbFit: Software to Determine Orbits of Asteroids

OrbFit is a software system allowing one to compute the orbits of asteroids starting from the observations, to propagate these orbits, and to compute predictions on the future (and past) position on the celestial sphere. It is a tool to be used to find a well known asteroid, to recover a lost one, to attribute a small group of observations, to identify two orbits with each other, to study the future (and/or past) close approaches to Earth, thus to assess the risk of an impact, and more.

[ascl:1106.016]
Nightfall: Animated Views of Eclipsing Binary Stars

Nightfall is an astronomy application for fun, education, and science. It can produce animated views of eclipsing binary stars, calculate synthetic lightcurves and radial velocity curves, and eventually determine the best-fit model for a given set of observational data of an eclipsing binary star system.

Nightfall comes with a user guide and a set of observational data for several eclipsing binary star systems.

[ascl:1106.017]
CAOS: Code for Adaptive Optics Systems

The CAOS "system" (where CAOS stands for Code for Adaptive Optics Systems) is properly said a Problem Solving Environment (PSE). It is essentially composed of a graphical programming interface (the CAOS Application Builder) which can load different packages (set of modules). Current publicly distributed packages are the Software Package CAOS (the original adaptive optics package), the Software Package AIRY (an image-reconstruction-oriented package - AIRY stands for Astronomical Image Restoration with interferometrY), the Software Package PAOLAC (a simple CAOS interface for the analytic IDL code PAOLA developed by Laurent Jolissaint - PAOLAC stands for PAOLA within Caos), and a couple of private packages (not publicly distributed but restricted to the corresponding consortia): SPHERE (especially developed for the VLT planet finder SPHERE), and AIRY-LN (a specialized version of AIRY for the LBT instrument LINC-NIRVANA). Another package is also being developed: MAOS (that stands for Multiconjugate Adaptive Optics Simulations), developed for multi-reference multiconjugate AO studies purpose but still in a beta-version form.

[ascl:1106.018]
CMB B-modes from Faraday Rotation

This code is a quick and exact calculator of B-mode angular spectrum due to Faraday rotation by stochastic magnetic fields. Faraday rotation induced B-modes can provide a distinctive signature of primordial magnetic fields because of their characteristic frequency dependence and because they are only weakly damped on small scales, allowing them to dominate B-modes from other sources. By numerically solving the full CMB radiative transport equations, we study the B-mode power spectrum induced by stochastic magnetic fields that have significant power on scales smaller than the thickness of the last scattering surface. Constraints on the magnetic field energy density and inertial scale are derived from WMAP 7-year data, and are stronger than the big bang nucleosynthesis (BBN) bound for a range of parameters. Observations of the CMB polarization at smaller angular scales are crucial to provide tighter constraints or a detection.

[ascl:1106.019]
Application of Compressive Sampling to Radio Astronomy I: Deconvolution

Compressive sampling is a new paradigm for sampling, based on sparseness of signals or signal representations. It is much less restrictive than Nyquist-Shannon sampling theory and thus explains and systematises the widespread experience that methods such as the Högbom CLEAN can violate the Nyquist-Shannon sampling requirements. In this paper, a CS-based deconvolution method for extended sources is introduced. This method can reconstruct both point sources and extended sources (using the isotropic undecimated wavelet transform as a basis function for the reconstruction step). We compare this CS-based deconvolution method with two CLEAN-based deconvolution methods: the Högbom CLEAN and the multiscale CLEAN. This new method shows the best performance in deconvolving extended sources for both uniform and natural weighting of the sampled visibilities. Both visual and numerical results of the comparison are provided.

Would you like to view a random code?