Results 1201-1300 of 2452 (2411 ASCL, 41 submitted)

[ascl:1712.012]
MadDM: Computation of dark matter relic abundance

MadDM computes dark matter relic abundance and dark matter nucleus scattering rates in a generic model. The code is based on the existing MadGraph 5 architecture and as such is easily integrable into any MadGraph collider study. A simple Python interface offers a level of user-friendliness characteristic of MadGraph 5 without sacrificing functionality. MadDM is able to calculate the dark matter relic abundance in models which include a multi-component dark sector, resonance annihilation channels and co-annihilations. The direct detection module of MadDM calculates spin independent / spin dependent dark matter-nucleon cross sections and differential recoil rates as a function of recoil energy, angle and time. The code provides a simplified simulation of detector effects for a wide range of target materials and volumes.

[ascl:1306.010]
MADCOW: Microwave Anisotropy Dataset Computational softWare

MADCOW is a set of parallelized programs written in ANSI C and Fortran 77 that perform a maximum likelihood analysis of visibility data from interferometers observing the cosmic microwave background (CMB) radiation. This software has been used to produce power spectra of the CMB with the Very Small Array (VSA) telescope.

[ascl:1209.006]
macula: Rotational modulations in the photometry of spotted stars

Photometric rotational modulations due to starspots remain the most common and accessible way to study stellar activity. Modelling rotational modulations allows one to invert the observations into several basic parameters, such as the rotation period, spot coverage, stellar inclination and differential rotation rate. The most widely used analytic model for this inversion comes from Budding (1977) and Dorren (1987), who considered circular, grey starspots for a linearly limb darkened star. That model is extended to be more suitable in the analysis of high precision photometry such as that by Kepler. Macula, a Fortran 90 code, provides several improvements, such as non-linear limb darkening of the star and spot, a single-domain analytic function, partial derivatives for all input parameters, temporal partial derivatives, diluted light compensation, instrumental offset normalisations, differential rotation, starspot evolution and predictions of transit depth variations due to unocculted spots. The inclusion of non-linear limb darkening means macula has a maximum photometric error an order-of-magnitude less than that of Dorren (1987) for Sun-like stars observed in the Kepler-bandpass. The code executes three orders-of-magnitude faster than comparable numerical codes making it well-suited for inference problems.

[ascl:1407.005]
MAAT: MATLAB Astronomy and Astrophysics Toolbox

The MATLAB Astronomy and Astrophysics Toolbox (MAAT) is a collection of software tools and modular functions for astronomy and astrophysics written in the MATLAB environment. It includes over 700 MATLAB functions and a few tens of data files and astronomical catalogs. The scripts cover a wide range of subjects including: astronomical image processing, ds9 control, astronomical spectra, optics and diffraction phenomena, catalog retrieval and searches, celestial maps and projections, Solar System ephemerides, planar and spherical geometry, time and coordinates conversion and manipulation, cosmology, gravitational lensing, function fitting, general utilities, plotting utilities, statistics, and time series analysis.

[ascl:1607.018]
LZIFU: IDL emission line fitting pipeline for integral field spectroscopy data

LZIFU (LaZy-IFU) is an emission line fitting pipeline for integral field spectroscopy (IFS) data. Written in IDL, the pipeline turns IFS data to 2D emission line flux and kinematic maps for further analysis. LZIFU has been applied and tested extensively to various IFS data, including the SAMI Galaxy Survey, the Wide-Field Spectrograph (WiFeS), the CALIFA survey, the S7 survey and the MUSE instrument on the VLT.

[ascl:1803.012]
LWPC: Long Wavelength Propagation Capability

Long Wavelength Propagation Capability (LWPC), written as a collection of separate programs that perform unique actions, generates geographical maps of signal availability for coverage analysis. The program makes it easy to set up these displays by automating most of the required steps. The user specifies the transmitter location and frequency, the orientation of the transmitting and receiving antennae, and the boundaries of the operating area. The program automatically selects paths along geographic bearing angles to ensure that the operating area is fully covered. The diurnal conditions and other relevant geophysical parameters are then determined along each path. After the mode parameters along each path are determined, the signal strength along each path is computed. The signal strength along the paths is then interpolated onto a grid overlying the operating area. The final grid of signal strength values is used to display the signal-strength in a geographic display. The LWPC uses character strings to control programs and to specify options. The control strings have the same meaning and use among all the programs.

[ascl:1201.016]
LumFunc: Luminosity Function Modeling

LumFunc is a numerical code to model the Luminosity Function based on central galaxy luminosity-halo mass and total galaxy luminosity-halo mass relations. The code can handle rest b_J-band (2dFGRS), r'-band (SDSS), and K-band luminosities, and any redshift with redshift dependences specified by the user. It separates the luminosity function (LF) to conditional luminosity functions, LF as a function of halo mass, and also to galaxy types. By specifying a narrow mass range, the code will return the conditional luminosity functions. The code returns luminosity functions for galaxy types as well (broadly divided to early-type and late-type). The code also models the cluster luminosity function, either mass averaged or for individual clusters.

[ascl:1404.001]
LTS_LINEFIT & LTS_PLANEFIT: LTS fit of lines or planes

LTS_LINEFIT and LTS_PLANEFIT are IDL programs to robustly fit lines and planes to data with intrinsic scatter. The code combines the Least Trimmed Squares (LTS) robust technique, proposed by Rousseeuw (1984) and optimized in Rousseeuw & Driessen (2006), into a least-squares fitting algorithm which allows for intrinsic scatter. This method makes the fit converge to the correct solution even in the presence of a large number of catastrophic outliers, where the much simpler σ-clipping approach can converge to the wrong solution. The code is also available in Python as ltsfit.

[ascl:1312.006]
LTL: The Little Template Library

LTL provides dynamic arrays of up to 7-dimensions, subarrays and slicing, support for fixed-size vectors and matrices including basic linear algebra operations, expression templates-based evaluation, and I/O facilities for ascii and FITS format files. Utility classes for command-line processing and configuration-file processing are provided as well.

[ascl:1505.012]
LSSGALPY: Visualization of the large-scale environment around galaxies on the 3D space

LSSGALPY provides visualization tools to compare the 3D positions of a sample (or samples) of isolated systems with respect to the locations of the large-scale structures galaxies in their local and/or large scale environments. The interactive tools use different projections in the 3D space (right ascension, declination, and redshift) to study the relation of the galaxies with the LSS. The tools permit visualization of the locations of the galaxies for different values of redshifts and redshift ranges; the relationship of isolated galaxies, isolated pairs, and isolated triplets to the galaxies in the LSS can be visualized for different values of the declinations and declination ranges.

[ascl:1612.002]
LSDCat: Line Source Detection and Cataloguing Tool

LSDCat is a conceptually simple but robust and efficient detection package for emission lines in wide-field integral-field spectroscopic datacubes. The detection utilizes a 3D matched-filtering approach for compact single emission line objects. Furthermore, the software measures fluxes and extents of detected lines. LSDCat is implemented in Python, with a focus on fast processing of large data-volumes.

[ascl:1209.003]
LSD: Large Survey Database framework

The Large Survey Database (LSD) is a Python framework and DBMS for distributed storage, cross-matching and querying of large survey catalogs (>10^9 rows, >1 TB). The primary driver behind its development is the analysis of Pan-STARRS PS1 data. It is specifically optimized for fast queries and parallel sweeps of positionally and temporally indexed datasets. It transparently scales to more than >10^2 nodes, and can be made to function in "shared nothing" architectures.

[ascl:1807.033]
LSC: Supervised classification of time-series variable stars

LSC (LINEAR Supervised Classification) trains a number of classifiers, including random forest and K-nearest neighbor, to classify variable stars and compares the results to determine which classifier is most successful. Written in R, the package includes anomaly detection code for testing the application of the selected classifier to new data, thus enabling the creation of highly reliable data sets of classified variable stars.

[ascl:1602.005]
LRGS: Linear Regression by Gibbs Sampling

LRGS (Linear Regression by Gibbs Sampling) implements a Gibbs sampler to solve the problem of multivariate linear regression with uncertainties in all measured quantities and intrinsic scatter. LRGS extends an algorithm by Kelly (2007) that used Gibbs sampling for performing linear regression in fairly general cases in two ways: generalizing the procedure for multiple response variables, and modeling the prior distribution of covariates using a Dirichlet process.

[ascl:1306.012]
LRG DR7 Likelihood Software

This software computes likelihoods for the Luminous Red Galaxies (LRG) data from the Sloan Digital Sky Survey (SDSS). It includes a patch to the existing CAMB software (ascl:1102.026; the February 2009 release) to calculate the theoretical LRG halo power spectrum for various models. The code is written in Fortran 90 and has been tested with the Intel Fortran 90 and GFortran compilers.

[ascl:1902.002]
LPNN: Limited Post-Newtonian N-body code for collisionless self-gravitating systems

The Limited Post-Newtonian N-body code (LPNN) simulates post-Newtonian interactions between a massive object and many low-mass objects. The interaction between one massive object and low-mass objects is calculated by post-Newtonian approximation, and the interaction between low-mass objects is calculated by Newtonian gravity. This code is based on the sticky9 code, and can be accelerated with the use of GPU in a CUDA (version 4.2 or earlier) environment.

[ascl:1501.007]
LP-VIcode: La Plata Variational Indicators Code

LP-VIcode computes variational chaos indicators (CIs) quickly and easily. The following CIs are included:

- Lyapunov Indicators, also known as Lyapunov Characteristic Exponents, Lyapunov Characteristic Numbers or Finite Time Lyapunov Characteristic Numbers (LIs)

- Mean Exponential Growth factor of Nearby Orbits (MEGNO)

- Slope Estimation of the largest Lyapunov Characteristic Exponent (SElLCE)

- Smaller ALignment Index (SALI)

- Generalized ALignment Index (GALI)

- Fast Lyapunov Indicator (FLI)

- Orthogonal Fast Lyapunov Indicator (OFLI)

- Spectral Distance (SD)

- dynamical Spectra of Stretching Numbers (SSNs)

- Relative Lyapunov Indicator (RLI)

[ascl:1010.038]
Low Resolution Spectral Templates For AGNs and Galaxies From 0.03 -- 30 microns

Assef, R. J.; Kochanek, C. S.; Brodwin, M.; Cool, R.; Forman, W.; Gonzalez, A. H.; Hickox, R. C.; Jones, C.; Le Floc'h, E.; Moustakas, J.; Murray, S. S.; Stern, D.

We present a set of low resolution empirical SED templates for AGNs and galaxies in the wavelength range from 0.03 to 30 microns based on the multi-wavelength photometric observations of the NOAO Deep-Wide Field Survey Bootes field and the spectroscopic observations of the AGN and Galaxy Evolution Survey. Our training sample is comprised of 14448 galaxies in the redshift range 0<~z<~1 and 5347 likely AGNs in the range 0<~z<~5.58. We use our templates to determine photometric redshifts for galaxies and AGNs. While they are relatively accurate for galaxies, their accuracies for AGNs are a strong function of the luminosity ratio between the AGN and galaxy components. Somewhat surprisingly, the relative luminosities of the AGN and its host are well determined even when the photometric redshift is significantly in error. We also use our templates to study the mid-IR AGN selection criteria developed by Stern et al.(2005) and Lacy et al.(2004). We find that the Stern et al.(2005) criteria suffers from significant incompleteness when there is a strong host galaxy component and at z =~ 4.5, when the broad Halpha emission line is redshifted into the [3.6] band, but that it is little contaminated by low and intermediate redshift galaxies. The Lacy et al.(2004) criterion is not affected by incompleteness at z =~ 4.5 and is somewhat less affected by strong galaxy host components, but is heavily contaminated by low redshift star forming galaxies. Finally, we use our templates to predict the color-color distribution of sources in the upcoming WISE mission and define a color criterion to select AGNs analogous to those developed for IRAC photometry. We estimate that in between 640,000 and 1,700,000 AGNs will be identified by these criteria, but will have serious completeness problems for z >~ 3.4.

[ascl:1308.002]
LOSSCONE: Capture rates of stars by a supermassive black hole

LOSSCONE computes the rates of capture of stars by supermassive black holes. It uses a stationary and time-dependent solutions for the Fokker-Planck equation describing the evolution of the distribution function of stars due to two-body relaxation, and works for arbitrary spherical and axisymmetric galactic models that are provided by the user in the form of M(r), the cumulative mass as a function of radius.

[ascl:1309.003]
LOSP: Liège Orbital Solution Package

LOSP is a FORTRAN77 numerical package that computes the orbital parameters of spectroscopic binaries. The package deals with SB1 and SB2 systems and is able to adjust either circular or eccentric orbits through a weighted fit.

[ascl:1608.018]
LORENE: Spectral methods differential equations solver

LORENE (Langage Objet pour la RElativité NumériquE) solves various problems arising in numerical relativity, and more generally in computational astrophysics. It is a set of C++ classes and provides tools to solve partial differential equations by means of multi-domain spectral methods. LORENE classes implement basic structures such as arrays and matrices, but also abstract mathematical objects, such as tensors, and astrophysical objects, such as stars and black holes.

[ascl:2004.001]
Locus: Optimized differential photometry

Locus implements the Locus Algorithm, which maximizes the performance of differential photometry systems by optimizing the number and quality of reference stars in the Field of View with the target.

[submitted]
loci: Smooth Cubic Multivariate Local Interpolations

loci is a shared library for interpolations in up to 4 dimensions. It is written in C and can be used with C/C++, Python and others. In order to calculate the coefficients of the cubic polynom, only local values are used: The data itself and all combinations of first-order derivatives, i.e. in 2D f_x, f_y and f_xy. This is in contrast to splines, where the coefficients are not calculated using derivatives, but non-local data, which can lead to over-smoothing the result.

[ascl:1606.014]
Lmfit: Non-Linear Least-Square Minimization and Curve-Fitting for Python

Newville, Matthew; Stensitzki, Till; Allen, Daniel B; Rawlik, Michal; Ingargiola, Antonino; Nelson, Andrew

Lmfit provides a high-level interface to non-linear optimization and curve fitting problems for Python. Lmfit builds on and extends many of the optimization algorithm of scipy.optimize, especially the Levenberg-Marquardt method from optimize.leastsq. Its enhancements to optimization and data fitting problems include using Parameter objects instead of plain floats as variables, the ability to easily change fitting algorithms, and improved estimation of confidence intervals and curve-fitting with the Model class. Lmfit includes many pre-built models for common lineshapes.

[ascl:1706.005]
LMC: Logarithmantic Monte Carlo

LMC is a Markov Chain Monte Carlo engine in Python that implements adaptive Metropolis-Hastings and slice sampling, as well as the affine-invariant method of Goodman & Weare, in a flexible framework. It can be used for simple problems, but the main use case is problems where expensive likelihood evaluations are provided by less flexible third-party software, which benefit from parallelization across many nodes at the sampling level. The parallel/adaptive methods use communication through MPI, or alternatively by writing/reading files, and mostly follow the approaches pioneered by CosmoMC (ascl:1106.025).

[ascl:1906.020]
LIZARD: Particle initial conditions for cosmological simulations

LIZARD (Lagrangian Initialization of Zeldovich Amplitudes for Resimulations of Displacements) creates particle initial conditions for cosmological simulations using the Zel'dovich approximation for the matter and velocity power spectrum.

[ascl:1906.011]
Lizard: An extensible Cyclomatic Complexity Analyzer

Lizard is an extensible Cyclomatic Complexity Analyzer for imperative programming languages including C/C++/C#, Python, Java, and Javascript. It counts the nloc (lines of code without comments) and CCN (cyclomatic complexity number), and takes a token count of functions and a parameter count of functions. It also does copy-paste detection (code clone detection/code duplicate detection) and many other forms of static code analysis. Lizard is often used in software-related research and calculates how complex the code looks rather than how complex the code really is; thought it's often very hard to get all the included folders and files right when they are complicated, that accuracy is not needed to determine cyclomatic complexity, which can be useful for measuring the maintainability of a software package.

[ascl:1902.005]
LiveData: Data reduction pipeline

LiveData is a multibeam single-dish data reduction system for bandpass calibration and gridding. It is used for processing Parkes multibeam and Mopra data.

[ascl:1112.009]
LISACode: A scientific simulator of LISA

LISACode is a simulator of the LISA mission. Its ambition is to achieve a new degree of sophistication allowing to map, as closely as possible, the impact of the different subsystems on the measurements. Its also a useful tool for generating realistic data including several kind of sources (Massive Black Hole binaries, EMRIs, cosmic string cusp, stochastic background, etc) and for preparing their analysis. It’s fully integrated to the Mock LISA Data Challenge. LISACode is not a detailed simulator at the engineering level but rather a tool whose purpose is to bridge the gap between the basic principles of LISA and a future, sophisticated end-to-end simulator.

[ascl:1601.007]
LIRA: Low-counts Image Reconstruction and Analysis

LIRA (Low-counts Image Reconstruction and Analysis) deconvolves any unknown sky components, provides a fully Poisson 'goodness-of-fit' for any best-fit model, and quantifies uncertainties on the existence and shape of unknown sky. It does this without resorting to χ2 or rebinning, which can lose high-resolution information. It is written in R and requires the FITSio package.

[ascl:1602.006]
LIRA: LInear Regression in Astronomy

LIRA (LInear Regression in Astronomy) performs Bayesian linear regression that accounts for heteroscedastic errors in both the independent and the dependent variables, intrinsic scatters (in both variables), time evolution of slopes, normalization and scatters, Malmquist and Eddington bias, and break of linearity. The posterior distribution of the regression parameters is sampled with a Gibbs method exploiting the JAGS (ascl:1209.002) library.

[ascl:1504.019]
LineProf: Line Profile Indicators

LineProf implements a series of line-profile analysis indicators and evaluates its correlation with RV data. It receives as input a list of Cross-Correlation Functions and an optional list of associated RV. It evaluates the line-profile according to the indicators and compares it with the computed RV if no associated RV is provided, or with the provided RV otherwise.

[ascl:2007.012]
Line-Stacker: Spectral lines stacking

Line-Stacker stacks both 3D cubes or already extracted spectra and is an extension of Stacker (ascl:1912.019). It is an ensemble of both CASA tasks and native python tasks. Line-Stacker supports image stacking and some additional tools, allowing further analysis of the stack product, are also included in the module.

[ascl:1710.023]
LIMEPY: Lowered Isothermal Model Explorer in PYthon

LIMEPY solves distribution function (DF) based lowered isothermal models. It solves Poisson's equation used on input parameters and offers fast solutions for isotropic/anisotropic, single/multi-mass models, normalized DF values, density and velocity moments, projected properties, and generates discrete samples.

[ascl:1107.012]
LIME: Flexible, Non-LTE Line Excitation and Radiation Transfer Method for Millimeter and Far-infrared Wavelengths

LIME solves the molecular and atomic excitation and radiation transfer problem in a molecular gas and predicting emergent spectra. The code works in arbitrary three dimensional geometry using unstructured Delaunay latices for the transport of photons. Various physical models can be used as input, ranging from analytical descriptions over tabulated models to SPH simulations. To generate the Delaunay grid we sample the input model randomly, but weigh the sample probability with the molecular density and other parameters, and thereby we obtain an average grid point separation that scales with the local opacity. Slow convergence of opaque models becomes traceable; when convergence between the level populations, the radiation field, and the point separation has been obtained, the grid is ray-traced to produced images that can readily be compared to observations. LIME is particularly well suited for modeling of ALMA data because of the high dynamic range in scales that can be resolved using this type of grid, and can furthermore deal with overlapping lines of multiple molecular and atomic species.

[ascl:1906.007]
limb-darkening: Limb-darkening coefficients generator

Limb-darkening generates limb-darkening coefficients from ATLAS and PHOENIX model atmospheres using arbitrary response functions. The code uses PyFITS (ascl:1207.009) and has several other dependencies, and produces a folder of results with descriptions of the columns contained in each file.

[ascl:1711.009]
Lightning: SED Fitting Package

Lightning is a spectral energy distribution (SED) fitting procedure that quickly and reliably recovers star formation history (SFH) and extinction parameters. The SFH is modeled as discrete steps in time. The code consists of a fully vectorized inversion algorithm to determine SFH step intensities and combines this with a grid-based approach to determine three extinction parameters.

[ascl:1812.013]
Lightkurve: Kepler and TESS time series analysis in Python

Lightkurve Collaboration; Cardoso, José Vinícius de Miranda; Hedges, Christina; Gully-Santiago, Michael; Saunders, Nicholas; Cody, Ann Marie; Barclay, Thomas; Hall, Oliver; Sagear, Sheila; Turtelboom, Emma; Zhang, Johnny; Tzanidakis, Andy; Mighell, Ken; Coughlin, Jeff; Bell, Keaton; Berta-Thompson, Zach; Williams, Peter; Dotson, Jessie; Barentsen, Geert

Lightkurve analyzes astronomical flux time series data, in particular the pixels and light curves obtained by NASA’s Kepler, K2, and TESS exoplanet missions. This community-developed Python package is designed to be user friendly to lower the barrier for students, astronomers, and citizen scientists interested in analyzing data from these missions. Lightkurve provides easy tools to download, inspect, and analyze time series data and its documentation is supported by a large syllabus of tutorials.

[ascl:1408.012]
LightcurveMC: An extensible lightcurve simulation program

LightcurveMC is a versatile and easily extended simulation suite for testing the performance of time series analysis tools under controlled conditions. It is designed to be highly modular, allowing new lightcurve types or new analysis tools to be introduced without excessive development overhead. The statistical tools are completely agnostic to how the lightcurve data is generated, and the lightcurve generators are completely agnostic to how the data will be analyzed. The use of fixed random seeds throughout guarantees that the program generates consistent results from run to run.

LightcurveMC can generate periodic light curves having a variety of shapes and stochastic light curves having a variety of correlation properties. It features two error models (Gaussian measurement and signal injection using a randomized sample of base light curves), testing of C1 shape statistic, periodograms, ΔmΔt plots, autocorrelation function plots, peak-finding plots, and Gaussian process regression. The code is written in C++ and R.

[ascl:1403.004]
Lightcone: Light-cone generating script

Lightcone works with simulated galaxy data stored in a relational database to rearrange the data in a shape of a light-cone; simulated galaxy data is expected to be in a box volume. The light-cone constructing script works with output from the SAGE semi-analytic model (ascl:1601.006), but will work with any other model that has galaxy positions (and other properties) saved per snapshots of the simulation volume distributed in time. The database configuration file is set up for PostgreSQL RDBMS, but can be modified for use with any other SQL database.

[ascl:2102.006]
Lightbeam: Simulate light through weakly-guiding waveguides

Lightbeam simulates the 3D propagation of light through waveguides of arbitrary geometries. This code package is based off of the finite-differences beam propagation method, and employs a transverse adaptive mesh for extra computational efficiency. Also included are tools to simulate adaptive optics systems for use in conjunction with waveguides, useful in astronomical contexts for simulating coupling devices which transfer telescope light to the science instrument.

[ascl:2012.008]
LIFELINE: LIne proFiles in massivE coLliding wInd biNariEs

LIFELINE (LIne proFiles in massivE coLliding wInd biNariEs) simulates the X-ray lines profile in colliding wind binaries. The code is self-consistent and computes the distribution of the wind velocity, the characterization of the wind shock region, and the line profile. In addition to perform the overall computation, LIFELINE can use a pre-computed velocity distribution to compute the shock characteristics and the line profile, or use pre-computed shock characteristics and velocity distributions to compute only the line profile.

[ascl:2002.017]
libstempo: Python wrapper for Tempo2

libstempo uses the Tempo2 library (ascl:1210.015) to load a pulsar's tim/par files, providing Python access to the TOAs, the residuals, the timing-model parameters, the fit procedure, and more.

[ascl:1402.033]
libsharp: Library for spherical harmonic transforms

Libsharp is a collection of algorithms for efficient conversion between maps on the sphere and their spherical harmonic coefficients. It supports a wide range of pixelisations (including HEALPix, GLESP, and ECP). This library is a successor of libpsht (ascl:1010.020); it adds MPI support for distributed memory systems and SHTs of fields with arbitrary spin, and also supports new developments in CPU instruction sets like the Advanced Vector Extensions (AVX) or fused multiply-accumulate (FMA) instructions. libsharp is written in portable C99; it provides an interface accessible to other programming languages such as C++, Fortran, and Python.

[ascl:1010.020]
Libpsht: Algorithms for Efficient Spherical Harmonic Transforms

Libpsht (or "library for Performing Spherical Harmonic Transforms") is a collection of algorithms for efficient conversion between spatial-domain and spectral-domain representations of data defined on the sphere. The package supports transforms of scalars as well as spin-1 and spin-2 quantities, and can be used for a wide range of pixelisations (including HEALPix, GLESP and ECP). It will take advantage of hardware features like multiple processor cores and floating-point vector operations, if available. Even without this additional acceleration, the employed algorithms are among the most efficient (in terms of CPU time as well as memory consumption) currently being used in the astronomical community.

The library is written in strictly standard-conforming C90, ensuring portability to many different hard- and software platforms, and allowing straightforward integration with codes written in various programming languages like C, C++, Fortran, Python etc.

Libpsht is distributed under the terms of the GNU General Public License (GPL) version 2.

Development on this project has ended; its successor is libsharp (ascl:1402.033).

[ascl:1612.003]
libprofit: Image creation from luminosity profiles

libprofit is a C++ library for image creation based on different luminosity profiles. It offers fast and accurate two-dimensional integration for a useful number of profiles, including Sersic, Core-Sersic, broken-exponential, Ferrer, Moffat, empirical King, point-source and sky, with a simple mechanism for adding new profiles. libprofit provides a utility to read the model and profile parameters from the command-line and generate the corresponding image. It can output the resulting image as text values, a binary stream, or as a simple FITS file. It also provides a shared library exposing an API that can be used by any third-party application. R and Python interfaces are available: ProFit (ascl:1612.004) and PyProfit (ascl:1612.005).

[ascl:1604.002]
libpolycomp: Compression/decompression library

Libpolycomp compresses and decompresses one-dimensional streams of numbers by means of several algorithms. It is well-suited for time-ordered data acquired by astronomical instruments or simulations. One of the algorithms, called "polynomial compression", combines two widely-used ideas (namely, polynomial approximation and filtering of Fourier series) to achieve substantial compression ratios for datasets characterized by smoothness and lack of noise. Notable examples are the ephemerides of astronomical objects and the pointing information of astronomical telescopes. Other algorithms implemented in this C library are well known and already widely used, e.g., RLE, quantization, deflate (via libz) and Burrows-Wheeler transform (via libbzip2). Libpolycomp can compress the timelines acquired by the Planck/LFI instrument with an overall compression ratio of ~9, while other widely known programs (gzip, bzip2) reach compression ratios less than 1.5.

[ascl:1502.016]
libnova: Celestial mechanics, astrometry and astrodynamics library

libnova is a general purpose, double precision, celestial mechanics, astrometry and astrodynamics library. Among many other calculations, it can calculate aberration, apparent position, proper motion, planetary positions, orbit velocities and lengths, angular separation of bodies, and hyperbolic motion of bodies.

[ascl:1206.009]
Libimf

Libimf provides a collection of programming functions based on the general IMF-algorithm by Pflamm-Altenburg & Kroupa (2006).

[ascl:1408.002]
LIA: LWS Interactive Analysis

The Long Wavelength Spectrometer (LWS) was one of two complementary spectrometers on the Infrared Space Observatory (ISO). LIA (LWS Interactive Analysis) is used for processing data from the LWS. It provides access to the different processing steps, including visualization of intermediate products and interactive manipulation of the data at each stage.

[ascl:1712.016]
LgrbWorldModel: Long-duration Gamma-Ray Burst World Model

LgrbWorldModel is written in Fortran 90 and attempts to model the population distribution of the Long-duration class of Gamma-Ray Bursts (LGRBs) as detected by the NASA's now-defunct Burst And Transient Source Experiment (BATSE) onboard the Compton Gamma Ray Observatory (CGRO). It is assumed that the population distribution of LGRBs is well fit by a multivariate log-normal distribution. The best-fit parameters of the distribution are then found by maximizing the likelihood of the observed data by BATSE detectors via a native built-in Adaptive Metropolis-Hastings Markov-Chain Monte Carlo (AMH-MCMC) Sampler.

[ascl:1710.016]
LGMCA: Local-Generalized Morphological Component Analysis

LGMCA (Local-Generalized Morphological Component Analysis) is an extension to GMCA (ascl:1710.015). Similarly to GMCA, it is a Blind Source Separation method which enforces sparsity. The novel aspect of LGMCA, however, is that the mixing matrix changes across pixels allowing LGMCA to deal with emissions sources which vary spatially. These IDL scripts compute the CMB map from WMAP and Planck data; running LGMCA on the WMAP9 temperature products requires the main script and a selection of mandatory files, algorithm parameters and map parameters.

[ascl:1804.023]
LFsGRB: Binary neutron star merger rate via the luminosity function of short gamma-ray bursts

LFsGRB models the luminosity function (LF) of short Gamma Ray Bursts (sGRBs) by using the available catalog data of all short GRBs (sGRBs) detected till 2017 October, estimating the luminosities via pseudo-redshifts obtained from the Yonetoku correlation, and then assuming a standard delay distribution between the cosmic star formation rate and the production rate of their progenitors. The data are fit well both by exponential cutoff powerlaw and broken powerlaw models. Using the derived parameters of these models along with conservative values in the jet opening angles seen from afterglow observations, the true rate of short GRBs is derived. Assuming a short GRB is produced from each binary neutron star merger (BNSM), the rate of gravitational wave (GW) detections from these mergers are derived for the past, present and future configurations of the GW detector networks.

[ascl:1804.024]
LFlGRB: Luminosity function of long gamma-ray bursts

LFlGRB models the luminosity function (LF) of long Gamma Ray Bursts (lGRBs) by using a sample of Swift and Fermi lGRBs to re-derive the parameters of the Yonetoku correlation and self-consistently estimate pseudo-redshifts of all the bursts with unknown redshifts. The GRB formation rate is modeled as the product of the cosmic star formation rate and a GRB formation efficiency for a given stellar mass.

[ascl:1711.018]
LExTeS: Link Extraction and Testing Suite

LExTeS (Link Extraction and Testing Suite) extracts hyperlinks from PDF documents, tests the extracted links to see which are broken, and tabulates the results. Though written to support a particular set of PDF documents, the dataset and scripts can be edited for use on other documents.

[ascl:1108.009]
LePHARE: Photometric Analysis for Redshift Estimate

LePHARE is a set of Fortran commands to compute photometric redshifts and to perform SED fitting. The latest version includes new features with FIR fitting and a more complete treatment of physical parameters and uncertainties based on PÉGASE and Bruzual & Charlot population synthesis models. The program is based on a simple chi2 fitting method between the theoretical and observed photometric catalogue. A simulation program is also available in order to generate realistic multi-colour catalogues taking into account observational effects.

[ascl:1910.011]
LEO-Py: Likelihood Estimation of Observational data with Python

LEO-Py uses a novel technique to compute the likelihood function for data sets with uncertain, missing, censored, and correlated values. It uses Gaussian copulas to decouple the correlation structure of variables and their marginal distributions to compute likelihood functions, thus mitigating inconsistent parameter estimates and accounting for non-normal distributions in variables of interest or their errors.

[ascl:1307.005]
LENSVIEW: Resolved gravitational lens images modeling

Lensview models resolved gravitational lens systems based on LensMEM but using the Skilling & Bryan MEM algorithm. Though its primary purpose is to find statistically acceptable lens models for lensed images and to reconstruct the surface brightness profile of the source, LENSVIEW can also be used for more simple tasks such as projecting a given source through a lens model to generate a “true” image by conserving surface brightness. The user can specify complicated lens models based on one or more components, such as softened isothermal ellipsoids, point masses, exponential discs, and external shears; LENSVIEW generates a best-fitting source matching the observed data for each specific combination of model parameters.

[ascl:1804.012]
Lenstronomy: Multi-purpose gravitational lens modeling software package

Lenstronomy is a multi-purpose open-source gravitational lens modeling python package. Lenstronomy reconstructs the lens mass and surface brightness distributions of strong lensing systems using forward modelling and supports a wide range of analytic lens and light models in arbitrary combination. The software is also able to reconstruct complex extended sources as well as point sources. Lenstronomy is flexible and numerically accurate, with a clear user interface that could be deployed across different platforms. Lenstronomy has been used to derive constraints on dark matter properties in strong lenses, measure the expansion history of the universe with time-delay cosmography, measure cosmic shear with Einstein rings, and decompose quasar and host galaxy light.

[ascl:1602.009]
LensTools: Weak Lensing computing tools

LensTools implements a wide range of routines frequently used in Weak Gravitational Lensing, including tools for image analysis, statistical processing and numerical theory predictions. The package offers many useful features, including complete flexibility and easy customization of input/output formats; efficient measurements of power spectrum, PDF, Minkowski functionals and peak counts of convergence maps; survey masks; artificial noise generation engines; easy to compute parameter statistical inferences; ray tracing simulations; and many others. It requires standard numpy and scipy, and depending on tools used, may require Astropy (ascl:1304.002), emcee (ascl:1303.002), matplotlib, and mpi4py.

[ascl:1102.004]
LENSTOOL: A Gravitational Lensing Software for Modeling Mass Distribution of Galaxies and Clusters (strong and weak regime)

We describe a procedure for modelling strong lensing galaxy clusters with parametric methods, and to rank models quantitatively using the Bayesian evidence. We use a publicly available Markov chain Monte-Carlo (MCMC) sampler ('Bayesys'), allowing us to avoid local minima in the likelihood functions. To illustrate the power of the MCMC technique, we simulate three clusters of galaxies, each composed of a cluster-scale halo and a set of perturbing galaxy-scale subhalos. We ray-trace three light beams through each model to produce a catalogue of multiple images, and then use the MCMC sampler to recover the model parameters in the three different lensing configurations. We find that, for typical Hubble Space Telescope (HST)-quality imaging data, the total mass in the Einstein radius is recovered with ~1-5% error according to the considered lensing configuration. However, we find that the mass of the galaxies is strongly degenerated with the cluster mass when no multiple images appear in the cluster centre. The mass of the galaxies is generally recovered with a 20% error, largely due to the poorly constrained cut-off radius. Finally, we describe how to rank models quantitatively using the Bayesian evidence. We confirm the ability of strong lensing to constrain the mass profile in the central region of galaxy clusters in this way. Ultimately, such a method applied to strong lensing clusters with a very large number of multiple images may provide unique geometrical constraints on cosmology.

[ascl:1905.017]
LensQuEst: CMB Lensing QUadratic Estimator

LensQuEst forecasts the signal-to-noise of CMB lensing estimators (standard, shear-only, magnification-only), generates mock maps, lenses them, and applies various lensing estimators to them. It can manipulate flat sky maps in various ways, including FFT, filtering, power spectrum, generating Gaussian random field, and applying lensing to a map, and evaluate these estimators on flat sky maps.

[ascl:2010.010]
lenspyx: Curved-sky python lensed CMB maps simulation package

lenspyx creates curved-sky python lensed CMB maps simulations; the software allows those familiar with healpy (ascl:2008.022) to build very easily lensed CMB simulations. Parallelization is done with openmp. The numerical cost is approximately that of an high-res harmonic transform. lenspyx provides two methods to build a simulation; one method computes a deflected spin-0 healpix map from its alm and deflection field alm, and the other computes a deflected spin-weight Healpix map from its gradient and curl modes and deflection field alm. lenspyx can be used in conjunction with the Planck 2018 CMB lensing pipeline plancklens (ascl:2010.009) to reproduce the published map and band-powers.

[ascl:1705.009]
LensPop: Galaxy-galaxy strong lensing population simulation

LensPop simulates observations of the galaxy-galaxy strong lensing population in the Dark Energy Survey (DES), the Large Synoptic Survey Telescope (LSST), and Euclid surveys.

[ascl:1102.025]
LensPix: Fast MPI full sky transforms for HEALPix

Modelling of the weak lensing of the CMB will be crucial to obtain correct cosmological parameter constraints from forthcoming precision CMB anisotropy observations. The lensing affects the power spectrum as well as inducing non-Gaussianities. We discuss the simulation of full sky CMB maps in the weak lensing approximation and describe a fast numerical code. The series expansion in the deflection angle cannot be used to simulate accurate CMB maps, so a pixel remapping must be used. For parameter estimation accounting for the change in the power spectrum but assuming Gaussianity is sufficient to obtain accurate results up to Planck sensitivity using current tools. A fuller analysis may be required to obtain accurate error estimates and for more sensitive observations. We demonstrate a simple full sky simulation and subsequent parameter estimation at Planck-like sensitivity.

[ascl:1010.050]
LensPerfect: Gravitational Lens Massmap Reconstructions Yielding Exact Reproduction of All Multiple Images

LensPerfect is a new approach to the massmap reconstruction of strong gravitational lenses. Conventional methods iterate over possible lens models which reproduce the observed multiple image positions well but not exactly. LensPerfect only produces solutions which fit all of the data exactly. Magnifications and shears of the multiple images can also be perfectly constrained to match observations.

[ascl:9903.001]
LENSKY: Galactic Microlensing Probability

Given a model for the Galaxy, this program computes the microlensing rate in any direction. Program features include the ability to include the brightness of the lens and to compute the probability of lens detection at any level of lensing amplification. The program limits itself to lensing by single stars of single sources. The program is currently setup to accept input from the Galactic models of Bahcall and Soniera (1982, 1986).

There are three files needed for LENSKY, the Fortran file lensky.for and two input files: galmod.dsk (15 Megs) and galmod.sph (22 Megs). The zip file available below contains all three files. The program generates output to the file lensky.out. The program is pretty self-explanatory past that.

[ascl:2102.021]
lensingGW: Lensing of gravitational waves

lensingGW simulates lensed gravitational waves in ground-based interferometers from arbitrary compact binaries and lens models. Its algorithm resolves strongly lensed images and microimages simultaneously, such as the images resulting from hundreds of microlenses embedded in galaxies and galaxy clusters. It is based on Lenstronomy (ascl:1804.012),

[ascl:1308.004]
LensEnt2: Maximum-entropy weak lens reconstruction

LensEnt2 is a maximum entropy reconstructor of weak lensing mass maps. The method takes each galaxy shape as an independent estimator of the reduced shear field and incorporates an intrinsic smoothness, determined by Bayesian methods, into the reconstruction. The uncertainties from both the intrinsic distribution of galaxy shapes and galaxy shape estimation are carried through to the final mass reconstruction, and the mass within arbitrarily shaped apertures are calculated with corresponding uncertainties. The input is a galaxy ellipticity catalog with each measured galaxy shape treated as a noisy tracer of the reduced shear field, which is inferred on a fine pixel grid assuming positivity, and smoothness on scales of w arcsec where w is an input parameter. The ICF width w can be chosen by computing the evidence for it.

[ascl:1505.026]
Lensed: Forward parametric modelling of strong lenses

Lensed performs forward parametric modelling of strong lenses. Using a provided model, Lensed renders the expected image of the lensing event for a large number of parameter settings, thereby exploring the space of possible realizations of the observation. It compares the expectation to the observed image by calculating the likelihood that the observation was indeed produced by the assumed model, thus reconstructing the probability distribution over the parameter space of the model. Written in C, the code uses a massively parallel ray-tracing kernel to perform the necessary calculations on a graphics processing unit (GPU), making the precise rendering of the background lensed sources fast and allowing the simultaneous optimization of tens of parameters for the selected model.

[ascl:1905.016]
LensCNN: Gravitational lens detector

The LensCNN (Convolutional Neural Network) identifies images containing gravitational lensing systems after being trained and tested on simulated images, recovering most systems that are identifiable by eye.

[ascl:1809.001]
LEMON: Differential photometry pipeline

LEMON is a differential-photometry pipeline, written in Python, that determines the changes in the brightness of astronomical objects over time and compiles their measurements into light curves. This code makes it possible to completely reduce thousands of FITS images of time series in a matter of only a few hours, requiring minimal user interaction.

[ascl:2010.013]
Legolas: Large Eigensystem Generator for One-dimensional pLASmas

Legolas (Large Eigensystem Generator for One-dimensional pLASmas) is a finite element code for MHD spectroscopy of 1D Cartesian/cylindrical equilibria with flow that balance pressure gradients, enriched with various non-adiabatic effects. The code's capabilities range from full spectrum calculations to eigenfunctions of specific modes to full-on parametric studies of various equilibrium configurations in different geometries.

[ascl:1104.006]
LECTOR: Line-strengths in One-dimensional ASCII Spectra

LECTOR is a Fortran 77 code that measures line-strengths in one dimensional ascii spectra. The code returns the values of the Lick indices as well as those of Vazdekis & Arimoto 1999, Vazdekis et al. 2001, Rose 1994, Jones & Worthey 1995 and Cenarro et al. 2001. The code measures as many indices as you wish if the limits of two pseudocontinua (at each side of the feature) and the feature itself (i.e. Lick-style index definition) are provided. The Lick-style indices could be either expressed in pseudo-equivalent widths or in magnitudes. If requested the program provides index error estimates on the basis of photon statistics.

[ascl:1507.016]
Least Asymmetry: Centering Method

Lust, Nate B.; Britt, Daniel; Harrington, Joseph; Nymeyer, Sarah; Stevenson, Kevin B.; Ross, Emily L.; Bowman, William; Fraine, Jonathan

Least Asymmetry finds the center of a distribution of light in an image using the least asymmetry method; the code also contains center of light and fitting a Gaussian routines. All functions in Least Asymmetry are designed to take optional weights.

[ascl:1511.018]
LDC3: Three-parameter limb darkening coefficient sampling

LDC3 samples physically permissible limb darkening coefficients for the Sing et al. (2009) three-parameter law. It defines the physically permissible intensity profile as being everywhere-positive, monotonically decreasing from center to limb and having a curl at the limb. The approximate sampling method is analytic and thus very fast, reproducing physically permissible samples in 97.3% of random draws (high validity) and encompassing 94.4% of the physically permissible parameter volume (high completeness).

[ascl:1805.003]
lcps: Light curve pre-selection

lcps searches for transit-like features (i.e., dips) in photometric data. Its main purpose is to restrict large sets of light curves to a number of files that show interesting behavior, such as drops in flux. While lcps is adaptable to any format of time series, its I/O module is designed specifically for photometry of the Kepler spacecraft. It extracts the pre-conditioned PDCSAP data from light curves files created by the standard Kepler pipeline. It can also handle csv-formatted ascii files. lcps uses a sliding window technique to compare a section of flux time series with its surroundings. A dip is detected if the flux within the window is lower than a threshold fraction of the surrounding fluxes.

[ascl:1708.017]
LCC: Light Curves Classifier

Light Curves Classifier uses data mining and machine learning to obtain and classify desired objects. This task can be accomplished by attributes of light curves or any time series, including shapes, histograms, or variograms, or by other available information about the inspected objects, such as color indices, temperatures, and abundances. After specifying features which describe the objects to be searched, the software trains on a given training sample, and can then be used for unsupervised clustering for visualizing the natural separation of the sample. The package can be also used for automatic tuning parameters of used methods (for example, number of hidden neurons or binning ratio).

Trained classifiers can be used for filtering outputs from astronomical databases or data stored locally. The Light Curve Classifier can also be used for simple downloading of light curves and all available information of queried stars. It natively can connect to OgleII, OgleIII, ASAS, CoRoT, Kepler, Catalina and MACHO, and new connectors or descriptors can be implemented. In addition to direct usage of the package and command line UI, the program can be used through a web interface. Users can create jobs for ”training” methods on given objects, querying databases and filtering outputs by trained filters. Preimplemented descriptors, classifier and connectors can be picked by simple clicks and their parameters can be tuned by giving ranges of these values. All combinations are then calculated and the best one is used for creating the filter. Natural separation of the data can be visualized by unsupervised clustering.

[ascl:1405.001]
LBLRTM: Line-By-Line Radiative Transfer Model

LBLRTM (Line-By-Line Radiative Transfer Model) is an accurate line-by-line model that is efficient and highly flexible. LBLRTM attributes provide spectral radiance calculations with accuracies consistent with the measurements against which they are validated and with computational times that greatly facilitate the application of the line-by-line approach to current radiative transfer applications. LBLRTM has been extensively validated against atmospheric radiance spectra from the ultra-violet to the sub-millimeter.

LBLRTM's heritage is in FASCODE [Clough et al., 1981, 1992].

[ascl:1202.011]
Lattimer-Swesty Equation of State Code

The Lattimer-Swesty Equation of State code is rapid enough to use directly in hydrodynamical simulations such as stellar collapse calculations. It contains an adjustable nuclear force that accurately models both potential and mean-field interactions and allows for the input of various nuclear parameters, including the bulk incompressibility parameter, the bulk and surface symmetry energies, the symmetric matter surface tension, and the nucleon effective masses. This permits parametric studies of the equation of state in astrophysical situations. The equation of state is modeled after the Lattimer, Lamb, Pethick, and Ravenhall (LLPR) compressible liquid drop model for nuclei, and includes the effects of interactions and degeneracy of the nucleon outside nuclei.

[ascl:1911.015]
LATTICEEASY: Lattice simulator for evolving interacting scalar fields in an expanding universe

LATTICEEASY creates lattice simulations of the evolution of interacting scalar fields in an expanding universe. The program can do runs with different parameters and new models can be easily introduced for evaluation. Simulations can be done in one, two, or three dimensions by resetting a single variable. Mathematica notebooks for plotting the output and a range of models are also available for download; a parallel processing version of LATTICEEASY called CLUSTEREASY (ascl:1911.016) is also available.

[ascl:2010.006]
LaSSI: Large-Scale Structure Information

LaSSI produces forecasts for the LSST 3x2 point functions analysis, or the LSSTxCMB S4 and LSSTxSO 6x2 point functions analyses using a Fisher matrix. It computes the auto and cross correlations of galaxy number density, galaxy shear and CMB lensing convergence. The software includes the effect of Gaussian and outlier photo-z errors, shear multiplicative bias, linear galaxy bias, and extensions to ΛCDM.

[ascl:1806.021]
LASR: Linear Algorithm for Significance Reduction

LASR removes stellar variability in the light curves of δ-Scuti and similar stars. It subtracts oscillations from a time series by minimizing their statistical significance in frequency space.

[ascl:1208.015]
Lare3d: Lagrangian-Eulerian remap scheme for MHD

Lare3d is a Lagrangian-remap code for solving the non-linear MHD equations in three spatial dimensions.

[ascl:1703.001]
Larch: X-ray Analysis for Synchrotron Applications using Python

Larch is an open-source library and toolkit written in Python for processing and analyzing X-ray spectroscopic data. The primary emphasis is on X-ray spectroscopic and scattering data collected at modern synchrotron sources. Larch provides a wide selection of general-purpose processing, analysis, and visualization tools for processing X-ray data; its related target application areas include X-ray absorption fine structure (XAFS), micro-X-ray fluorescence (XRF) maps, quantitative X-ray fluorescence, X-ray absorption near edge spectroscopy (XANES), and X-ray standing waves and surface scattering. Larch provides a complete set of XAFS Analysis tools and has support for visualizing and analyzing XRF maps and spectra, and additional tools for X-ray spectral analysis, data handling, and general-purpose data modeling.

[ascl:1409.003]
LANL*: Radiation belt drift shell modeling

LANL* calculates the magnetic drift invariant L*, used for modeling radiation belt dynamics and other space weather applications, six orders of magnitude (~ one million times) faster than convectional approaches that require global numerical field lines tracing and integration. It is based on a modern machine learning technique (feed-forward artificial neural network) by supervising a large data pool obtained from the IRBEM library, which is the traditional source for numerically calculating the L* values. The pool consists of about 100,000 samples randomly distributed within the magnetosphere (r: [1.03, 11.5] Re) and within a whole solar cycle from 1/1/1994 to 1/1/2005. There are seven LANL* models, each corresponding to its underlying magnetic field configuration that is used to create the data sample pool. This model has applications to real-time radiation belt forecasting, analysis of data sets involving tens of satellite-years of observations, and other problems in space weather.

[ascl:1010.077]
LAMDA: Leiden Atomic and Molecular Database

LAMDA provides users of radiative transfer codes with the basic atomic and molecular data needed for the excitation calculation. Line data of a number of astrophysically interesting species are summarized, including energy levels, statistical weights, Einstein A-coefficients and collisional rate coefficients. Available collisional data from quantum chemical calculations and experiments are in some cases extrapolated to higher energies. Currently the database contains atomic data for 3 species and molecular data for 28 different species. In addition, several isotopomers and deuterated versions are available. This database should form an important tool in analyzing observations from current and future infrared and (sub)millimetre telescopes. Databases such as these rely heavily on the efforts by the chemical physics community to provide the relevant atomic and molecular data. Further efforts in this direction are strongly encouraged so that the current extrapolations of collisional rate coefficients can be replaced by actual calculations in future releases.

RADEX, a computer program for performing statistical equilibrium calculations is made publicly available as part of the data base.

[ascl:1604.003]
LAMBDAR: Lambda Adaptive Multi-Band Deblending Algorithm in R

LAMBDAR measures galaxy fluxes from an arbitrary FITS image, covering an arbitrary photometric wave-band, when provided all parameters needed to construct galactic apertures at the required locations for multi-band matched aperture galactic photometry. Through sophisticated matched aperture photometry, the package develops robust Spectral Energy Distributions (SEDs) and accurately establishes the physical properties of galactic objects. LAMBDAR was based on a package detailed in Bourne et al. (2012) that determined galactic fluxes in low resolution Herschel images.

[ascl:2012.021]
LALSuite: LIGO Scientific Collaboration Algorithm Library Suite

LALSuite contains numerous gravitational wave analysis libraries. Written primarily in C, the libraries include math and signal analysis packages such as for vector manipulation, FFT, statistics, time-domain filtering, and numerical and signal injection routines. The libraries also include date and time and datatype factory routines, in addition to general and support tools and a variety of Python packages. Also included are packages for gravitational waveform and noise generation, burst gravitational wave data analysis, inspiral and ringdown CBC gravitational wave data analysis, pulsar and continuous wave gravitational wave data analysis, and Bayesian inference data analysis. Various wrappers and other tools are also included.

[ascl:1601.011]
LACEwING: LocAting Constituent mEmbers In Nearby Groups

LACEwING (LocAting Constituent mEmbers In Nearby Groups) uses the kinematics (positions and motions) of stars to determine if they are members of one of 10 nearby young moving groups or 4 nearby open clusters within 100 parsecs. It is written for Python 2.7 and depends upon Numpy, Scipy, and Astropy (ascl:1304.002) modules. LACEwING can be used as a stand-alone code or as a module in other code. Additional python programs are present in the repository for the purpose of recalibrating the code and producing other analyses, including a traceback analysis.

[ascl:1207.005]
L.A.Cosmic: Laplacian Cosmic Ray Identification

Conventional algorithms for rejecting cosmic rays in single CCD exposures rely on the contrast between cosmic rays and their surroundings and may produce erroneous results if the point-spread function is smaller than the largest cosmic rays. This code uses a robust algorithm for cosmic-ray rejection, based on a variation of Laplacian edge detection. The algorithm identifies cosmic rays of arbitrary shapes and sizes by the sharpness of their edges and reliably discriminates between poorly sampled point sources and cosmic rays. Examples of its performance are given for spectroscopic and imaging data, including Hubble Space Telescope Wide Field Planetary Camera 2 images, in the code paper.

[ascl:1507.004]
L-PICOLA: Fast dark matter simulation code

L-PICOLA generates and evolves a set of initial conditions into a dark matter field and can include primordial non-Gaussianity in the simulation and simulate the past lightcone at run-time, with optional replication of the simulation volume. It is a fast, distributed-memory, planar-parallel code. L-PICOLA is extremely useful for both current and next generation large-scale structure surveys.

[ascl:1407.011]
kungifu: Calibration and reduction of fiber-fed IFU astronomical spectroscopy

kungifu is a set of IDL software routines designed for the calibration and reduction of fiber-fed integral-field unit (IFU) astronomical spectroscopy. These routines can perform optimal extraction of IFU data and allow relative and absolute wavelength calibration to within a few hundredths of a pixel (for unbinned data) across 1200-2000 fibers. kungifu does nearly Poisson-limited sky subtraction, even in the I band, and can rebin in wavelength. The Princeton IDLUTILS and IDLSPEC2D packages must be installed for kungifu to run.

[ascl:1807.028]
ktransit: Exoplanet transit modeling tool in python

The routines in ktransit create and fit a transiting planet model. The underlying model is a Fortran implementation of the Mandel & Agol (2002) limb darkened transit model. The code calculates a full orbital model and eccentricity can be allowed to vary; radial velocity data can also be calculated via the model and included in the fit.

[ascl:1804.026]
KSTAT: KD-tree Statistics Package

KSTAT calculates the 2 and 3-point correlation functions in discreet point data. These include the two-point correlation function in 2 and 3-dimensions, the anisotripic 2PCF decomposed in either sigma-pi or Kazin's dist. mu projection. The 3-point correlation function can also work in anisotropic coordinates. The code is based on kd-tree structures and is parallelized using a mixture of MPI and OpenMP.

[ascl:1505.004]
KS Integration: Kelvin-Stokes integration

KS Intergration solves for mutual photometric effects produced by planets and spots allowing for analysis of planetary occultations of spots and spots regions. It proceeds by identifying integrable and non integrable arcs on the objects profiles and analytically calculates the solution exploiting the power of Kelvin-Stokes theorem. It provides the solution up to the second degree of the limb darkening law.

[ascl:1402.011]
KROME: Chemistry package for astrophysical simulations

Grassi, Tommaso; Bovino, Stefano; Prieto, Joaquín; Seifried, Daniel; Simoncini, Eugenio; Gianturco, Francesco; Schleicher, Dominik

KROME, given a chemical network (in CSV format), automatically generates all the routines needed to solve the kinetics of the system modeled as a system of coupled Ordinary Differential Equations. It provides a large set of physical processes connected to chemistry, including photochemistry, cooling, heating, dust treatment, and reverse kinetics. KROME is flexible and can be used for a wide range of astrophysical simulations. The package contains a network for primordial chemistry, a small metal network appropriate for the modeling of low metallicities environments, a detailed network for the modeling of molecular clouds, and a network for planetary atmospheres as well as a framework for the modelling of the dust grain population.

[ascl:1609.003]
Kranc: Cactus modules from Mathematica equations

Kranc turns a tensorial description of a time dependent partial differential equation into a module for the Cactus Computational Toolkit (ascl:1102.013). This Mathematica application takes a simple continuum description of a problem and generates highly efficient and portable code, and can be used both for rapid prototyping of evolution systems and for high performance supercomputing.

[ascl:1807.027]
kplr: Tools for working with Kepler data using Python

kplr provides a lightweight Pythonic interface to the catalog of planet candidates (Kepler Objects of Interest [KOIs]) in the NASA Exoplanet Archive and the data stored in the Barbara A. Mikulski Archive for Space Telescopes (MAST). kplr automatically supports loading Kepler data using pyfits (ascl:1207.009) and supports two types of data: light curves and target pixel files.

[ascl:1504.013]
kozai: Hierarchical triple systems evolution

The kozai Python package evolves hierarchical triple systems in the secular approximation. As its name implies, the kozai package is useful for studying Kozai-Lidov oscillations. The kozai package can represent and evolve hierarchical triples using either the Delaunay orbital elements or the angular momentum and eccentricity vectors. kozai contains functions to calculate the period of Kozai-Lidov oscillations and the maximum eccentricity reached; it also contains a module to study octupole order effects by averaging over individual Kozai-Lidov oscillations.

Would you like to view a random code?