Results 2401-2500 of 3572 (3481 ASCL, 91 submitted)
Prospector conducts principled inference of stellar population properties from photometric and/or spectroscopic data. The code combine photometric and spectroscopic data rigorously using a flexible spectroscopic calibration model and infer high-dimensional stellar population properties using parameteric SFHs (with ensemble MCMC sampling). Prospector also constrains the linear combination of stellar population components that are present in a galaxy (e.g. non-parametric SFHs) using spectra and/or photometry, and fits individual stellar spectra using large interpolated grids.
Protostellar Evolution simulates the evolution of stellar stellar radius and luminosity from the bound core stage through to the core hydrogen ignition as a zero-age main-sequence (ZAMS) star and beyond. Written in Fortran 90, the code is implemented as a module of the FLASH astrophysical fluid dynamics code (ascl:1010.082).
provabgs infers full posterior distributions of galaxy properties for galaxies in the DESI Bright Galaxy Survey using state-of-the-art Bayesian spectral energy distribution (SED) modeling of DESI spectroscopy and photometry. provabgs includes a state-of-the-art stellar population synthesis (SPS) model based on non-parametric prescription for star formation history, a metallicity history that varies over the age of the galaxy, and a flexible dust prescription. It has a neural network emulator for the SPS model that enables accelerated inference. Full posteriors of the 12 SPS parameters can be derived in ~10 minutes. The emulator is currently designed for galaxies from 0 < z < 0.6. provabgs also includes a Bayesian inference pipeline that is based on zeus (ascl:2008.010).
PRyMordial offers fast and precise evaluation of both the Big Bang Nucleosynthesis (BBN) light-element abundances and the effective number of relativistic degrees of freedom. It can be used within and beyond the Standard Model. The package calculates Neff and helium-4, deuterium, helium-3 and lithium-7 abundances. PRyMordial corrects for QED plasma effects, neutron lifetime, and incomplete neutrino decoupling, and includes an optional module that re-elaborates all the ODE systems of the code in Julia.
Pryngles produces visualizations of the geometric configuration of a ringed exoplanet (an exoplanet with a ring or exoring for short) and calculates the light-curve signatures produced by these kind of planets. The model behind the package has been developed in an effort to predict the signatures that exorings may produce not only in the light-curve of transiting exoplanets (a problem that has been extensively studied) but also in the light of stars having non-transiting exoplanets.
PSFEx (“PSF Extractor”) extracts models of the Point Spread Function (PSF) from FITS images processed with SExtractor and measures the quality of images. The generated PSF models can be used for model-fitting photometry or morphological analyses.
PSFMachine creates models of instrument effective Point Spread Functions (ePSFs), also called Pixel Response Functions (PRFs). These models are then used to fit a scene in a stack of astronomical images. PSFMachine is able to quickly derive photometry from stacks of Kepler and TESS images and separate crowded sources.
PSFr empirically reconstructs an oversampled version of the point spread function (PSF) from astronomical imaging observations. The code provides a light-weighted API of a refined version of an algorithm originally implemented in lenstronomy (ascl:1804.012). It provides user support with different artifacts in the data and supports the masking of pixels, or the treatment of saturation levels. PSFr has been used to reconstruct the PSF from multiply imaged lensed quasar images observed by the Hubble Space Telescope in a crowded lensing environment and more recently with James Webb Space Telescope (JWST) imaging data for a wide dynamical flux range.
PSLS simulates solar-like oscillators representative of PLATO targets. It includes planetary transits, stochastically-excited oscillations, granulation and activity background components, as well as instrumental systematic errors and random noises representative for PLATO.
The Planck Sky Model (PSM) is a global representation of the multi-component sky at frequencies ranging from a few GHz to a few THz. It summarizes in a synthetic way as much of our present knowledge as possible of the GHz sky. PSM is a complete and versatile set of programs and data that can be used for the simulation or the prediction of sky emission in the frequency range of typical CMB experiments, and in particular of the Planck sky mission. It was originally developed as part of the activities of Planck component separation Working Group (or "Working Group 2" - WG2), and of the ADAMIS team at APC.
PSM gives users the opportunity to investigate the model in some depth: look at its parameters, visualize its predictions for all individual components in various formats, simulate sky emission compatible with a given parameter set, and observe the modeled sky with a synthetic instrument. In particular, it makes possible the simulation of sky emission maps as could be plausibly observed by Planck or other CMB experiments that can be used as inputs for the development and testing of data processing and analysis techniques.
PSOAP (Precision Spectroscopic Orbits A-Parametrically) uses Gaussian processes to infer component spectra of single-lined and double-lined spectroscopic binaries, while simultaneously exploring the posteriors of the orbital parameters and the spectra themselves. PSOAP accounts for the natural λ-covariances in each spectrum, thus providing a natural "de-noising" of the spectra typically offered by Fourier techniques.
PSpectRe, written in C++, uses Fourier-space pseudo-spectral methods to evolve interacting scalar fields in an expanding universe. The code is optimized for the analysis of parametric resonance in the post-inflationary universe and provides an alternative to finite differencing codes. PSpectRe has both second- (Velocity-Verlet) and fourth-order (Runge-Kutta) time integrators. In some circumstances PSpectRe obtains reliable results while using substantially fewer points than a finite differencing code by computing the post-resonance equation of state. PSpectRe is designed to be easily extended to other problems in early-universe cosmology, including the generation of gravitational waves during phase transitions and pre-inflationary bubble collisions.
PSPLINE is a collection of Spline and Hermite interpolation tools for 1D, 2D, and 3D datasets on rectilinear grids. Spline routines give full control over boundary conditions, including periodic, 1st or 2nd derivative match, or divided difference-based boundary conditions on either end of each grid dimension. Hermite routines take the function value and derivatives at each grid point as input, giving back a representation of the function between grid points. Routines are provided for creating Hermite datasets, with appropriate boundary conditions applied. The 1D spline and Hermite routines are based on standard methods; the 2D and 3D spline or Hermite interpolation functions are constructed from 1D spline or Hermite interpolation functions in a straightforward manner. Spline and Hermite interpolation functions are often much faster to evaluate than other representations using e.g. Fourier series or otherwise involving transcendental functions.
PSRCHIVE is an Open Source C++ development library for the analysis of pulsar astronomical data. It implements an extensive range of algorithms for use in pulsar timing, polarimetric calibration, single-pulse analyses, RFI mitigation, scintillation studies, etc. These tools are utilized by a powerful suite of user-end programs that come with the library.
PSRDADA supports the development of distributed data acquisition and analysis systems; it provides a flexible and well-managed ring buffer in shared memory with a variety of applications for piping data from device to ring buffer and from ring buffer to device. PSRDADA allows more than one data set to be queued in the ring buffer at one time, and data may be recorded in selected bursts using data validity flags. A variety of clients have been implemented that can write data to the ring buffer and read data from it. The primary write clients can be controlled via a simple, text-based socket interface, and read client software exists for writing data to an array of disks, sending data to an array of nodes, or processing the data directly from RAM. At the highest level of control and configuration, scripts launch the PSRDADA configuration across all nodes in the cluster, monitor all relevant processes, configure and control through a web-based interface, interface with observatory scheduling tools, and manage the ownership and archival of project data. It has been used in the implementation of baseband recording and processing instrumentation for radio pulsar astronomy.
PSRPOP is a package developed to model the Galactic population and evolution of radio pulsars. It is a collection of modules written in Fortran77 for an analysis of a large sample of pulsars detected by the Parkes Multibeam Pulsar Survey. The main programs are: 1.) populate, which creates a model Galaxy of pulsars distributed according according to various assumptions; 2.) survey, which searches the model galaxies generated using populate using realistic models of pulsar surveys; and 3.) visualize, a Tk/PGPLOT script to plot various aspects of model detected pulsars from survey. A sample screenshot from visualize can be found here.
PsrPopPy is a Python implementation of the Galactic population and evolution of radio pulsars modelling code PSRPOP (ascl:1107.019).
psrqpy directly queries the Australia Telescope National Facility (ATNF) Pulsar Catalogue by downloading and parsing the full catalog database, which is cached and can be reused. The module assists astronomers who want access to the latest pulsar information via a script rather than through the standard web interface.
PSRVoid performs RFI excision, flux calibration and timing of folded pulsar data. RFI excision is administered via both traditional and multi-layered deep learning neural network algorithms. The software offers full neural network control (over training set creation and manipulation and network parameters). PSRVoid also contains useful data miners for the ATNF, a multitude of plotting tools, as well as many useful pulsar processing macros such as space velocity simulators and Tempo2 (ascl:1210.015) wrappers.
Pulsar Survey Scraper aggregates pulsar discoveries before they are included in the ATNF pulsar catalog and enables searching and filtering based on position and dispersion measure. This facilitates identifying new pulsar discoveries. Pulsar Survey Scraper can be downloaded or run online using the Pulsar Survey Scraper webform.
PSwarm is a global optimization solver for bound and linear constrained problems (for which the derivatives of the objective function are unavailable, inaccurate or expensive). The algorithm combines pattern search and particle swarm. Basically, it applies a directional direct search in the poll step (coordinate search in the pure simple bounds case) and particle swarm in the search step. PSwarm makes no use of derivative information of the objective function. It has been shown to be efficient and robust for smooth and nonsmooth problems, both in serial and in parallel.
PT-REX (Point-to-point TRend EXtractor) performs ptp analysis on every kind of extended radio source. The code exploits a set of different fitting methods to allow study of the spatial correlation, and is structured in a series of tasks to handle the individual steps of a ptp analysis independently, from defining a grid to sample the radio emission to accurately analyzing the data using several statistical methods. A major feature of PT-REX is the use of an automatic, randomly-generated sampling routine to combine several SMptp analysis into a Monte Carlo ptp (MCptp) analysis. By repeating several cycles of SMptp analysis with randomly-generated grids, PT-REX produces a distribution of values of k that describe its parameter space, thus allowing a reliably estimate of the trend (and its uncertainties).
PTAfast calculates the overlap reduction function in Pulsar Timing Array produced by the stochastic gravitational wave background for arbitrary polarizations, propagation velocities, and pulsar distances.
ptemcee, pronounced "tem-cee", is fork of Daniel Foreman-Mackey's emcee (ascl:1303.002) to implement parallel tempering more robustly. As far as possible, it is designed as a drop-in replacement for emcee. It is helpful for characterizing awkward, multi-modal probability distributions.
PTMCMCSampler performs MCMC sampling using advanced techniques. The code implements a variety of proposal schemes, including adaptive Metropolis, differential evolution, and parallel tempering, which can be used together in the same run.
pulsar_spectra provides a pulsar flux density catalog and automated spectral fitting software for finding spectral models. The package can also produce publication-quality plots and allows users to add new spectral measurements to the catalog. The spectral fitting software uses robust statistical methods to determine the best-fitting model for individual pulsar spectra.
Pulsarhunter searches for and confirms pulsars; it provides a set of time domain optimization tools for processing timeseries data produced by SIGPROC (ascl:1107.016). The software can natively write candidate lists for JReaper (included in the package), removing the need to manually import candidates into JReaper; JReaper also reads the PulsarHunter candidate file format.
The folding pipeline PulsarX searches for pulsars. The code includes radio frequency interference mitigation, de-dispersion, folding, and parameter optimization, and supports both psrfits and filterbank data formats. The toolset has two implementations of the folding pipelines; one uses a brute-force de-dispersion algorithm, and the other an algorithm that becomes more efficient than the brute-force de-dispersion algorithm as the number of candidates increases. PulsarX is appropriate for large-scale pulsar surveys.
Pulse Portraiture is a wideband pulsar timing code written in python. It uses an extension of the FFTFIT algorithm (Taylor 1992) to simultaneously measure a phase (TOA) and dispersion measure (DM). The code includes a Gaussian-component-based portrait modeling routine. The code uses the python interface to the pulsar data analysis package PSRCHIVE (ascl:1105.014) and also requires the non-linear least-squares minimization package lmfit (ascl:1606.014).
PUMA (Positional Update and Matching Algorithm) cross-matches low-frequency radio catalogs using a Bayesian positional probability with spectral matching criteria. The code reliably finds the correct spectral indices of sources and recovers ionospheric offsets. PUMA can be used to facilitate all-sky cross-matches with further constraints applied for other science goals.
The pS2HAT routines allow efficient, parallel calculation of the so-called 'pure' polarized multipoles. The computed multipole coefficients are equal to the standard pseudo-multipoles calculated for the apodized sky maps of the Stokes parameters Q and U subsequently corrected by so-called counterterms. If the applied apodizations fullfill certain boundary conditions, these multipoles correspond to the pure multipoles. Pure multipoles of one type, i.e., either E or B, are ensured not to contain contributions from the other one, at least to within numerical artifacts. They can be therefore further used in the estimation of the sky power spectra via the pseudo power spectrum technique, which has to however correctly account for the applied apodization on the one hand, and the presence of the counterterms, on the other.
In addition, the package contains the routines permitting calculation of the spin-weighted apodizations, given an input scalar, i.e., spin-0 window. The former are needed to compute the counterterms. It also provides routines for maps and window manipulations. The routines are written in C and based on the S2HAT library, which is used to perform all required spherical harmonic transforms as well as all inter-processor communication. They are therefore parallelized using MPI and follow the distributed-memory computational model. The data distribution patterns, pixelization choices, conventions etc are all as those assumed/allowed by the S2HAT library.
Puri-Psi addresses radio interferometric imaging problems using state-of-the-art optimization algorithms and deep learning. It performs scalable monochromatic, wide-band, and polarized imaging. It also provide joint calibration and imaging, and scalable uncertainty quantification. A scalable framework for wide-field monochromatic intensity imaging is also available, which encompasses a pure optimization algorithm, as well as an AI-based method in the form of a plug-and-play algorithm propelled by Deep Neural Network denoisers.
PURIFY is a collection of routines written in C that implements different tools for radio-interferometric imaging including file handling (for both visibilities and fits files), implementation of the measurement operator and set-up of the different optimization problems used for image deconvolution. The code calls the generic Sparse OPTimization (SOPT) (ascl:1307.020) package to solve the imaging optimization problems.
Given a path defined in sky coordinates and a spectral cube, pvextractor extracts a slice of the cube along that path and along the spectral axis to produce a position-velocity or position-frequency slice. The path can be defined programmatically in pixel or world coordinates, and can also be drawn interactively using a simple GUI. Pvextractor is the main function, but also includes a few utilities related to header trimming and parsing.
Conservative numerical schemes for general relativistic magnetohydrodynamics (GRMHD) require a method for transforming between "conserved'' variables such as momentum and energy density and "primitive" variables such as rest-mass density, internal energy, and components of the four-velocity. The forward transformation (primitive to conserved) has a closed-form solution, but the inverse transformation (conserved to primitive) requires the solution of a set of five nonlinear equations. This code performs the inversion.
pwkit is a collection of miscellaneous astronomical utilities in Python, with an emphasis on radio astronomy, reading and writing various data formats, and convenient command-line utilities. Utilities include basic astronomical calculations, data visualization tools such as mapping arbitrary data to color scales and tracing contours, and data input and output utilities such as streaming output from other programs.
pwv_kpno provides models for the atmospheric transmission due to precipitable water vapor (PWV) at user specified sites. Atmospheric transmission in the optical and near-infrared is highly dependent on the PWV column density along the line of sight. The pwv_kpno package uses published SuomiNet data in conjunction with MODTRAN models to determine the modeled, time-dependent atmospheric transmission between 3,000 and 12,000 Å. By default, models are provided for Kitt Peak National Observatory (KPNO). Additional locations can be added by the user for any of the hundreds of SuomiNet locations worldwide.
pxf_kin_err estimates the radial velocity and velocity dispersion uncertainties based solely on the shape of a template spectrum used in the fitting procedure and signal-to-noise information. This method can be used for exposure time calculators, in the design of observational programs and estimates on expected uncertainties for spectral surveys of galaxies and star clusters, and as an accurate substitute for Monte-Carlo simulations when running them for large samples of thousands of spectra is unfeasible.
Phase Dispersion Minimization (PDM) is a periodical signal detection method, and it is originally implemented by Stellingwerf with C (https://www.stellingwerf.com/rfs-bin/index.cgi?action=PageView&id=34). With the help of Cython, Py-PDM is much faster than other Python implementations.
py-sdm (Support Distribution Machines) is a Python implementation of nonparametric nearest-neighbor-based estimators for divergences between distributions for machine learning on sets of data rather than individual data points. It treats points of sets of data as samples from some unknown probability distribution and then statistically estimates the distance between those distributions, such as the KL divergence, the closely related Rényi divergence, L2 distance, or other similar distances.
Py-SPHViewer visualizes and explores N-body + Hydrodynamics simulations. The code interpolates the underlying density field (or any other property) traced by a set of particles, using the Smoothed Particle Hydrodynamics (SPH) interpolation scheme, thus producing not only beautiful but also useful scientific images. Py-SPHViewer enables the user to explore simulated volumes using different projections. Py-SPHViewer also provides a natural way to visualize (in a self-consistent fashion) gas dynamical simulations, which use the same technique to compute the interactions between particles.
Py4CAtS (PYthon scripts for Computational ATmospheric Spectroscopy) implements the individual steps of an infrared or microwave radiative transfer computation in separate scripts (and corresponding functions) to extract lines of relevant molecules in the spectral range of interest, compute line-by-line cross sections for given pressure(s) and temperature(s), combine cross sections to absorption coefficients and optical depths, and integrate along the line-of-sight to transmission and radiance/intensity. The code is a Python re-implementation of the Fortran code GARLIC (Generic Atmospheric Radiation Line-by-line Code) and uses the Numeric/Scientific Python modules for computationally-intensive highly optimized array-processing. Py4CAtS can be used in the console/terminal, inside the (I)Python interpreter, and in Jupyter notebooks.
The PyA (PyAstronomy) suite of astronomy-related packages includes a convenient fitting package that provides support for minimization and MCMC sampling, a set of astrophysical models (e.g., transit light-curve modeling), and algorithms for timing analysis such as the Lomb-Scargle and the Generalized Lomb-Scargle periodograms.
pyADfit models accretion discs around astrophysical objects. The code provides functions to calculate physical quantities related to accretion disks and perform parameter estimation using observational data. The accretion disc model is the alpha-disc model while the parameter estimation can be performed with Nessai (ascl:2405.002), Raynest (ascl:2405.003), or CPnest (ascl:2205.021).
PyAMOR models spectra of low level ammonia transitions (between (J,K)=(1,1) and (5,5)) and derives parameters such as intrinsic linewidth, optical depth, and rotation temperature. For low S/N or low spectral resolution data, the code uses cross-correlation between a model and a regridded spectrum (e.g. 10 times smaller channel width) to find the velocity, then fixes it and runs the minimization process. For high S/N data, PyAMOR runs with the velocity as a free parameter.
Pyaneti is a multi-planet radial velocity and transit fit software. The code uses Markov chain Monte Carlo (MCMC) methods with a Bayesian approach and a parallelized ensemble sampler algorithm in Fortran which makes the code fast. It creates posteriors, correlations, and ready-to-publish plots automatically, and handles circular and eccentric orbits. It is capable of multi-planet fitting and handles stellar limb darkening, systemic velocities for multiple instruments, and short and long cadence data, and offers additional capabilities.
PyAutoFit supports advanced statistical methods such as massively parallel non-linear search grid-searches, chaining together model-fits and sensitivity mapping. It is a Python-based probabilistic programming language which composes and fits models using a range of Bayesian inference libraries, such as emcee (ascl:1303.002) and dynesty (ascl:1809.013). It performs model composition and customization, outputting results, model-specific visualization and posterior analysis. Built for big-data analysis, results are output as a database which can be loaded after model-fitting is complete.
PyAutoLens models and analyzes galaxy-scale strong gravitational lenses. This automated module suite simultaneously models the lens galaxy's light and mass while reconstructing the extended source galaxy on an adaptive pixel-grid. Source-plane discretization is amorphous, adapting its clustering and regularization to the intrinsic properties of the lensed source. The lens's light is fitted using a superposition of Sersic functions, allowing PyAutoLens to cleanly deblend its light from the source. Bayesian model comparison is used to automatically chose the complexity of the light and mass models. PyAutoLens provides accurate light, mass, and source profiles inferred for data sets representative of both existing Hubble imaging and future Euclid wide-field observations.
PyBDSF (Python Blob Detector and Source Finder, formerly PyBDSM) decomposes radio interferometry images into sources and makes their properties available for further use. PyBDSF can decompose an image into a set of Gaussians, shapelets, or wavelets as well as calculate spectral indices and polarization properties of sources and measure the psf variation across an image. PyBDSF uses an interactive environment based on CASA (ascl:1107.013); PyBDSF may also be used in Python scripts.
PyBird evaluates the multipoles of the power spectrum of biased tracers in redshift space. In general, PyBird can evaluate the power spectrum of matter or biased tracers in real or redshift space. The code uses FFTLog (ascl:1512.017) to evaluate the one-loop power spectrum and the IR resummation. PyBird is designed for a fast evaluation of the power spectra, and can be easily inserted in a data analysis pipeline. It is a standalone tool whose input is the linear matter power spectrum which can be obtained from any Boltzmann code, such as CAMB (ascl:1102.026) or CLASS (ascl:1106.020). The Pybird output can be used in a likelihood code which can be part of the routine of a standard MCMC sampler. The design is modular and concise, such that parts of the code can be easily adapted to other case uses (e.g., power spectrum at two loops or bispectrum). PyBird can evaluate the power spectrum either given one set of EFT parameters, or independently of the EFT parameters. If the former option is faster, the latter is useful for subsampling or partial marginalization over the EFT parameters, or to Taylor expand around a fiducial cosmology for efficient parameter exploration.
pyBLoCXS is a sophisticated Markov chain Monte Carlo (MCMC) based algorithm designed to carry out Bayesian Low-Count X-ray Spectral (BLoCXS) analysis in the Sherpa environment. The code is a Python extension to Sherpa that explores parameter space at a suspected minimum using a predefined Sherpa model to high-energy X-ray spectral data. pyBLoCXS includes a flexible definition of priors and allows for variations in the calibration information. It can be used to compute posterior predictive p-values for the likelihood ratio test. The pyBLoCXS code has been tested with a number of simple single-component spectral models; it should be used with great care in more complex settings.
pybranch calculates experimental branching fractions and transition probabilities from measurements of atomic spectra. Though the program is usually used with spectral line lists from intensity-calibrated spectra from Fourier transform spectrometers, it can in principle be used with any calibrated spectra that meet the input requirements. pybranch takes a set of linelists, computes a weighted average branching fraction (Fki) for each line, combines these branching fractions with the level lifetime to obtain the transition probability, and then prints the calibrated intensities and S/N ratios for all the lines observed from a particular upper level in each spectrum. One line can be chosen to use as a reference to put all of the intensities on the same scale. pybranch can use calculated transition probabilities to calculate a residual from lines that have not been observed.
pyC2Ray updates C2-Ray (ascl:2312.022), an astrophysical radiative transfer code used to simulate the Epoch of Reionization (EoR). pyC2Ray includes a new raytracing method, ASORA, developed for GPUs, and provides a Python interface for customizable use of the code. The core features of C2-Ray, written in Fortran90, are wrapped using f2py as a Python extension module, while the raytracing library ASORA is implemented in C++ using CUDA. Both are native Python C-extensions and can be directly accessed from any Python script.
PyCactus contains tools for postprocessing data from numerical simulations performed with the Einstein Toolkit, based on the Cactus computational toolkit. The main package is PostCactus, which provides a high-level Python interface to the various data formats in a simulation folder. Further, the package SimRep allows the automatic creation of html reports for a simulation, and the SimVideo package allows the creation of movies visualizing simulation data.
PyCASSO runs the STARLIGHT code (ascl:1108.006) in integral field spectra (IFS). Cubes from various instruments are supported, including PMAS/PPAK (CALIFA), MaNGA, GMOS and MUSE. Emission lines can be measured using DOBBY, which is included in the package. The package also includes tools for IFS cubes analysis and plotting.
PyCBC analyzes data from gravitational-wave laser interferometer detectors, finds signals, and studies their parameters. It contains algorithms that can detect coalescing compact binaries and measure the astrophysical parameters of detected sources. PyCBC was used in the first direct detection of gravitational waves by LIGO and is used in the ongoing analysis of LIGO and Virgo data.
PyCCF emulates a Fortran program written by B. Peterson for use with reverberation mapping. The code cross correlates two light curves that are unevenly sampled using linear interpolation and measures the peak and centroid of the cross-correlation function. In addition, it is possible to run Monto Carlo iterations using flux randomization and random subset selection (RSS) to produce cross-correlation centroid distributions to estimate the uncertainties in the cross correlation results.
pyCELP (aka "pi-KELP") calculates Coronal Emission Line Polarization. It forward synthesizes the polarized emission of ionized atoms formed in the solar corona and calculates the atomic density matrix elements for a single ion under coronal equilibrium conditions and excited by a prescribed radiation field and thermal collisions. pyCELP solves a set of statistical equilibrium equations in the spherical statistical tensor representation for a multi-level atom for the no-coherence case. This approximation is useful in the case of forbidden line emission by visible and infrared lines, such as Fe XIII 1074.7 nm and Si X 3934 nm.
The project is a simple Python client for Cosmicflows-3 Distance-Velocity Calculator at distances less than 400 Mpc (http://edd.ifa.hawaii.edu/CF3calculator/)
Compute expectation distances or velocities based on smoothed velocity field from the Wiener filter model of https://ui.adsabs.harvard.edu/abs/2019MNRAS.488.5438G/abstract.
pycheops analyzes CHEOPS light curve data. The models in the package can also be applied to other types of data. pycheops includes a "cook book" and examples; in addition, it provides a command-line tool that aids in the preparation of observing requests for CHEOPS observers.
A super lightweight interface in Python to load spectra from the Pickles 1998 (stellar) and Brown 2014 (galactic) spectral catalogues
PyCloudy is a Python library that handles input and output files of the Cloudy photoionization code (Gary Ferland). It can also generate 3D nebula from various runs of the 1D Cloudy code. pyCloudy allows you to:
- define and write input file(s) for Cloudy code. As you can have it in a code, you may generate automatically sets of input files, changing parameters from one to the other.<
- read the Cloudy output files and play with the data: you will be able to plot line emissivity ratio vs. the radius of the nebula, the electron temperature, or any Cloudy output.
- build pseudo-3D models, a la Cloudy_3D, by running a set of models, changing parameters (e.g. inner radius, density) following angular laws, reading the outputs of the set of models and interpolating the results (Te, ne, line emissivities) in a 3D cube.
pycola is a multithreaded Python/Cython N-body code, implementing the Comoving Lagrangian Acceleration (COLA) method in the temporal and spatial domains, which trades accuracy at small-scales to gain computational speed without sacrificing accuracy at large scales. This is especially useful for cheaply generating large ensembles of accurate mock halo catalogs required to study galaxy clustering and weak lensing. The COLA method achieves its speed by calculating the large-scale dynamics exactly using LPT while letting the N-body code solve for the small scales, without requiring it to capture exactly the internal dynamics of halos.
PyCom provides function calls for deriving the optimal communication scheme to maximize the data rate between a remote probe and home-base. It includes models for the loss of photons from diffraction, technological limitations, interstellar extinction and atmospheric transmission, and manages major atmospheric, zodiacal, stellar and instrumental noise sources. It also includes scripts for creating figures appearing in the referenced paper.
PyCOOL is a Python + CUDA program that solves the evolution of interacting scalar fields in an expanding universe. PyCOOL uses modern GPUs to solve this evolution and to make the computation much faster. The code includes numerous post-processing functions that provide useful information about the cosmological model, including various spectra and statistics of the fields.
pycorr wraps two-point counter engines such as Corrfunc (ascl:1703.003) to estimate the correlation function. It supports theta (angular), s, s-mu, rp-pi binning schemes, analytical two-point counts with periodic boundary conditions, and inverse bitwise weights (in any integer format) and (angular) upweighting. It also provides MPI parallelization and jackknife estimate of the correlation function covariance matrix.
pycosie is analysis code used for Technicolor Dawn (TD), a Gadget-3 derived cosmological radiative SPH simulation suite. The target analyses are to complement what is done with TD and other analysis software in its suite. pycosie creates power spectrum from generated Lyman-alpha forests spectra, links absorbers to potential host galaxies, grids gas information for each galaxy, and reads specific output files from software such as Rockstar (ascl:1210.008) and SKID (ascl:1102.020).
The detection of cosmic ray hits (cosmics) in fiber-fed integral-field spectroscopy (IFS) data of single exposures is a challenging task because of the complex signal recorded by IFS instruments. Existing detection algorithms are commonly found to be unreliable in the case of IFS data, and the optimal parameter settings are usually unknown a priori for a given dataset. The Calar Alto legacy integral field area (CALIFA) survey generates hundreds of IFS datasets for which a reliable and robust detection algorithm for cosmics is required as an important part of the fully automatic CALIFA data reduction pipeline. PyCosmic combines the edge-detection algorithm of L.A.Cosmic with a point-spread function convolution scheme. PyCosmic is the only algorithm that achieves an acceptable detection performance for CALIFA data. Only for strongly undersampled IFS data does L.A.Cosmic exceed the performance of PyCosmic by a few percent. Thus, PyCosmic appears to be the most versatile cosmics detection algorithm for IFS data.
PyCosmo provides accurate predictions for cosmological observables including background quantities, power spectra and Limber and beyond-Limber angular power spectra. The software is designed to be interactive and user-friendly. It is available for download and is also offered on an interactive platform (PyCosmo Hub), which allows users to perform their own computations using Jupyter Notebooks without installing any software.
The pycraf Python package provides functions and procedures for spectrum-management compatibility studies, such as calculating the interference levels at a radio telescope produced from a radio broadcasting tower. It includes an implementation of ITU-R Recommendation P.452-16 for calculating path attenuation for the distance between an interferer and the victim service. It supports NASA's Shuttle Radar Topography Mission (SRTM) data for height-profile generation, includes a full implementation of ITU-R Rec. P.676-10, which provides two atmospheric models to calculate the attenuation for paths through Earth's atmosphere, and provides various antenna patterns necessary for compatibility studies (e.g., RAS, IMT, fixed-service links). The package can also convert power flux densities, field strengths, transmitted and received powers at certain distances and frequencies into each other.
pycrires runs the CRIRES+ recipes of EsoRex. The pipeline organizes the raw data, creates SOF and configuration files, runs the calibration and science recipes, and creates plots of the images and extracted spectra. Additionally, it corrects remaining inaccuracies in the wavelength solution and the spectrum curvature. pycrires also provides dedicated routines for the extraction, calibration, and detection of spatially-resolved objects such as directly imaged planets.
PyCS is a software toolbox to estimate time delays between multiple images of strongly lensed quasars, from resolved light curves such as obtained by the COSMOGRAIL monitoring program. The pycs package defines a collection of classes and high level functions, that you can script in a flexible way. PyCS makes it easy to compare different point estimators (including your own) without much code integration. The package heavily depends on numpy, scipy, and matplotlib.
pydftools is a pure-python port of the dftools R package (ascl:1805.002), which finds the most likely P parameters of a D-dimensional distribution function (DF) generating N objects, where each object is specified by D observables with measurement uncertainties. For instance, if the objects are galaxies, it can fit a MF (P=1), a mass-size distribution (P=2) or the mass-spin-morphology distribution (P=3). Unlike most common fitting approaches, this method accurately accounts for measurement in uncertainties and complex selection functions. Though this package imitates the dftools package quite closely while being as Pythonic as possible, it has not implemented 2D+ nor non-parametric.
PyDoppler is a python-based wrapper for the Spruit Doppler tomography software dopmap (ascl:2106.002). PyDoppler is designed to study time-resolved spectroscopic datasets of accreting compact binaries. This code can produce a trail spectra of a dataset and create Doppler tomography maps. It is intended to be a light-weight code for single emission line datasets.
PyDrizzle provides a semi-automated interface for computing the parameters necessary for running Drizzle (ascl:1212.011). PyDrizzle performs the task of determining the parameters necessary for aligning images based on the WCS information in the input image headers, as well as any supplemental alignment information provided in shift files, and combines the images onto the same WCS. Though it does not identify cosmic rays, it has the ability to ignore pixels flagged as bad, such as pixels identified by other programs as affected by cosmic rays.
Pyedra performs asteroid phase curve fitting. From a simple table containing the asteroid MPC number, phase angle and reduced magnitude, Pyedra estimates the parameters of the phase function using the least squares method. The user can choose from three different models for the phase curve fit: H-G model, H-G1-G2 model and the Shevchenko model. The output in all cases is a table containing the adjusted parameters and their corresponding errors. This package allows carrying out phase function analysis for a few asteroids as well as to process large volumes of data such as those released by current large surveys.
PyEphem provides scientific-grade astronomical computations for the Python programming language. Given a date and location on the Earth’s surface, it can compute the positions of the Sun and Moon, of the planets and their moons, and of any asteroids, comets, or earth satellites whose orbital elements the user can provide. Additional functions are provided to compute the angular separation between two objects in the sky, to determine the constellation in which an object lies, and to find the times at which an object rises, transits, and sets on a particular day.
The numerical routines that lie behind PyEphem are those from the XEphem astronomy application (ascl:1112.013), whose author, Elwood Downey, generously gave permission for us to use them as the basis for PyEphem.
PYESSENCE evolves linearly perturbed coupled quintessence models with multiple (cold dark matter) CDM fluid species and multiple DE (dark energy) scalar fields, and can be used to generate quantities such as the growth factor of large scale structure for any coupled quintessence model with an arbitrary number of fields and fluids and arbitrary couplings.
pyExoRaMa visualizes and manipulates data related to exoplanets and their host stars in a multi-dimensional parameter space. It enables statistical studies based on the large and constantly increasing number of detected exoplanets, identifies possible interdependence among several physical parameters, and compares observables with theoretical models describing the exoplanet composition and structure.
The Python script/package pyExtinction computes and plots total atmospheric extinction from decomposition into physical components (Rayleigh attenuation, ozone absorption, aerosol extinction). Its default extinction parameters are adapted to mean Mauna Kea summit conditions.
Python Fully Automated TiRiFiC (pyFAT) wraps around the tilted ring fitting code (TiRiFiC, ascl:1208.008) to fully automate the process of fitting simple tilted ring models to line emission cubes. pyFAT is the successor to the IDL/GDL FAT (ascl:1507.011) code and offers improved handling and fitting as well as several new features. PyFAT fits simple rotationally symmetric discs with asymmetric warps and surface brightness distributions, providing a base model that can can be used in TiRiFiC to explore large scale motions. pyFAT delivers much more control over the fitting procedure, which is made possible by the new modular setup and the use of omegaconf for the input and default settings.
pyFFTW is a pythonic wrapper around FFTW (ascl:1201.015), the speedy FFT library. Both the complex DFT and the real DFT are supported, as well as on arbitrary axes of arbitrary shaped and strided arrays, which makes it almost feature equivalent to standard and real FFT functions of numpy.fft. Additionally, it supports the clongdouble dtype, which numpy.fft does not, and operating FFTW in multithreaded mode.
PyFITS provides an interface to FITS formatted files in the Python scripting language and PyRAF, the Python-based interface to IRAF. It is useful both for interactive data analysis and for writing analysis scripts in Python using FITS files as either input or output. PyFITS is a development project of the Science Software Branch at the Space Telescope Science Institute.
PyFITS has been deprecated. Please see Astropy.
Pyflation calculates cosmological perturbations during an inflationary expansion of the universe. The modules in the pyflation Python package can be used to run simulations of different scalar field models of the early universe. The main classes are contained in the cosmomodels module and include simulations of background fields and first order and second order perturbations. The sourceterm package contains modules required for the computation of the term required for the evolution of second order perturbations.
Alongside the Python package, the bin directory contains Python scripts which can run first and second order simulations. A helper script called pyflation-qsubstart.py sets up a full second order run (including background, first order and source calculations) to be used on queueing system which contains the qsub executable (e.g. a Rocks cluster).
PyFOSC is a pipeline toolbox for long-slit spectroscopy data reduction written in Python. It can be used for FOSC (Faint Object Spectrograph and Camera) data from Xinglong/Lijiang 2-meter telescopes in China. This pipeline privodes a neat way for data pre-processing, including updating missing header fileds for BFOSC data, reducing fits file extension for YFOSC data, etc. And it makes the data reduction procedure efficient by using previously identified lamp spectra as re-identification references during wavelength calibration, and applying multiprocessing in some modules. PyFOSC also enables customization for any other long-slit spectroscopy data.
PyFstat performs F-statistic-based continuous gravitational wave (CW) searches and other CW data analysis tasks. It is built on top of the LALSuite library (ascl:2012.021), making that library's functionality more accessible through a Python interface; it also provides MCMC-based followup of promising candidates from wide-parameter-space searches.
pygacs manipulates Gaia catalog tables hosted at ESA's Gaia Archive Core Systems (GACS). It provides python modules for the access and manipulation of tables in GACS, such as a basic query on a single table or crossmatch between two tables. It employs the TAP command line access tools described in the Help section of the GACS web pages. Both public and authenticated access have been implemented.
pygad provides a framework for dealing with Gadget snapshots. The code reads any of the many different Gadget (ascl:0003.001) formats, allows easy masking snapshots to particles of interest, decorates the data blocks with units, allows to add automatically updating derived blocks, and provides several binning and plotting routines, among other tasks, to provide convenient, intuitive handling of the Gadget data without the need to worry about technical details. pygad provides access to single stellar population (SSP) models, has an interface to Rockstar (ascl:1210.008) output files, provides its own friends-of-friends (FoF) finder, calculates spherical overdensities, and has a sub-module to generate mock absorption lines.
pyGadgetReader is a universal GADGET snapshot reader for python that supports type-1, type-2, HDF5, and TIPSY (ascl:1111.015) binary formats. It additionally supports reading binary outputs from FoF_Special, P-StarGroupFinder, Rockstar (ascl:1210.008), and Rockstar-Galaxies.
PyGDSM (formely PyGSM) is a Python interface for the Global Sky Model (GSM, ascl:1011.010). The GSM is a model of diffuse galactic radio emission, constructed from a variety of all-sky surveys spanning the radio band (e.g. Haslam and WMAP). PyGDSM uses the GSM to generate all-sky maps in Healpix format of diffuse Galactic radio emission from 10 MHz to 94 GHz. The PyGDSM module provides visualization utilities, file output in FITS format, and the ability to generate observed skies for a given location and date. PyGDSM requires Healpy (ascl:2008.022), PyEphem (ascl:1112.014), and AstroPy (ascl:1304.002).
PyGFit measures PSF-matched photometry from images with disparate pixel scales and PSF sizes; its primary purpose is to extract robust spectral energy distributions (SEDs) from crowded images. It fits blended sources in crowded, low resolution images with models generated from a higher resolution image, thus minimizing the impact of crowding and also yielding consistently measured fluxes in different filters which minimizes systematic uncertainty in the final SEDs.
pyGMMis is a mixtures-of-Gaussians density estimation method that accounts for arbitrary incompleteness in the process that creates the samples as long as the incompleteness is known over the entire feature space and does not depend on the sample density (missing at random). pyGMMis uses the Expectation-Maximization procedure and generates its best guess of the unobserved samples on the fly. It can also incorporate an uniform "background" distribution as well as independent multivariate normal measurement errors for each of the observed samples, and then recovers an estimate of the error-free distribution from which both observed and unobserved samples are drawn. The code automatically segments the data into localized neighborhoods, and is capable of performing density estimation with millions of samples and thousands of model components on machines with sufficient memory.
pyGTC creates giant triangle confusogram (GTC) plots. Triangle plots display the results of a Monte-Carlo Markov Chain (MCMC) sampling or similar analysis. The recovered parameter constraints are displayed on a grid in which the diagonal shows the one-dimensional posteriors (and, optionally, priors) and the lower-left triangle shows the pairwise projections. Such plots are useful for seeing the parameter covariances along with the priors when fitting a model to data.
pygwb analyzes laser interferometer data and designs a gravitational wave background (GWB) search pipeline. Its modular and flexible codebase is tailored to current ground-based interferometers such as LIGO Hanford, LIGO Livingston, and Virgo, but can be generalized to other configurations. It is based on GWpy (ascl:1912.016) and bilby (ascl:1901.011) for optimal integration with widely-used gravitational wave data analysis tools. pygwb also includes a set of scripts to analyze data and perform large-scale searches on a high-performance computing cluster efficiently.
pygwinc processes and plots noise budgets for ground-based gravitational wave detectors. Its primary feature is a collection of mostly analytic noise calculation functions for various sources of noise affecting detectors, including quantum and seismic noise, mirror coating and substrate thermal noise, suspension fiber thermal noise, and residual gas noise. It is also a generalized noise budgeting tool that allows users to create arbitrary noise budgets for any experiment, not just ground-based GW detectors, using measured or analytically calculated data.
pyhalomodel computes halo-model power spectra for any desired tracer combination. The software requires only halo profiles for the tracers to be specified; these could be matter profiles, galaxy profiles, or something else, such as electron-pressure or HI profiles. pyhalomodel makes it easier to perform basic calculations using the halo model by reducing the changes of variables required to integrate halo profiles against halo mass functions, which can be confusing and tedious.
PyHammer performs rapid and automatic spectral classification of stars according to the Morgan-Keenan classification system; it is a Python revision of the IDL code The Hammer (ascl:1405.003) and offers additional capabilities. Working in the range of 3,650-10,200 Angstroms, the automatic spectral typing algorithm compares important spectral lines to template spectra and determines the best matching spectral type, ranging from O to L type stars. The code can also determine a star's metallicity ([Fe/H]) and radial velocity shifts. Once the automatic classification algorithm has run, PyHammer provides the user an interface for determining spectral types visually by comparing their spectra to provided templates.
pyHIIexplorerV2 extracts the integrated spectra of HII regions from integral field spectroscopy (IFS) datacubes. The detection of HII regions performed by pyHIIexplorer is based on two assumptions: 1) HII regions have strong emission lines that are clearly above the continuum emission and the average ionized gas emission across each galaxy, and 2) the typical size of HII regions is about a few hundreds of parsecs, which corresponds to a usual projected size of a few arcsec at the distance of our galaxies. These assumptions will define clumpy structures with a high Ha emission line contrast in comparison to the continuum. pyHIIexplorerV2 is written in Python; it is based on and is a successor to HIIexplorer (ascl:1603.017).
The pyhrs package reduces data from the High Resolution Spectrograph (HRS) on the Southern African Large Telescope (SALT). HRS is a dual-beam, fiber fed echelle spectrectrograph with four modes of operation: low (R~16000), medium (R~34000), high (R~65000), and high stability (R~65000). pyhrs, written in Python, includes all of the steps necessary to reduce HRS low, medium, and high resolution data; this includes basic CCD reductions, order identification, wavelength calibration, and extraction of the spectra.
pyia provides tools for working with Gaia data. It accesses Gaia data columns as Quantity objects, i.e., with units (e.g., data.parallax will have units ‘milliarcsecond’) , constructs covariance matrices for Gaia data, and generates random samples from the Gaia error distribution per source. pyia can also create SkyCoord objects from Gaia data and execute simple (small) remote queries via the Gaia science archive and automatically fetch the results.
Would you like to view a random code?